Відео

@@remithreadz1560 you’re going to love using a coverstitch, it makes everything look so professional. The settings may vary depending on the fabric. Just make it a habit to do a sample stitch out using the fabric you’re using for the garment with. If adjustments are needed, don’t adjust everything, sometimes it only takes maybe adjusting the differential or just the looper. Some go crazy and start adjusting every dial on the machine.

@@jeanetteweger5518 Thank you, for your quick reply! Is there "starting" settings I can start with and then adjust if/as needed? I'm scared to even open the box, I've had it for 2 months 😞

@@remithreadz1560 ​​⁠​​⁠start with the factory settings of all on 4 on the needles and looper. Change the stitch length to 4 and leave the differential at the factory setting as well. Definitely adjust your presser foot (on to of the machine) so that the top of the silver screw is 1/2” of the top of the machine. Once there leave it, that’s the sweet spot. Also get different needles, I buy mine on eBay, you want Organ brand 90/14 SUK BP, these seem to work the best. If you’re going to sew fleece, spandex, linen, French terry, buy some 80/12 sharp needles.

@@j.a.maldonado4681 thank you

@@salabova have you considered buying a new belt? You can get them thru Ken’s Sewing.

@@salabova did you oil/lubricate the belt area? Is the belt too tight?

Is the belt in place?

@@lindaborza6629 glad the video helps

@@sadacpa you’re welcome, glad the video helps.

Yes, I have never had one come undone and I made several hundred items using this technique.

Please explain, what is not close enough

Closer so can see more around the needle area. Found another video where I could. Thanks anyway for the video

Okay. Maybe you’re not aware, but you can zoom in on the video.

Didn’t know you could! Thanks

@@veronicab3119 I didn’t either, we learn something everyday.

So glad you didn’t toss it. Be sure to watch my other videos, just type in my name and they should come up.

Unfortunately I will not be making anymore videos on this machine as it worked only the 1 day I made the video. It has turned into an expensive door stop. It’s a shame that Consew doesn’t even put out videos.

@@jeanetteweger5518 Oh this is a shame. I thought I’d be able to finally make a use out of it. Thank you so much for your reply.

Thank you and I’m glad the video helped!!

I didn’t try it that way but I don’t see why you can’t.

Yes I use the wide needle, no needle in the middle.

I actually don’t have this attachment anymore because I don’t like the thickness of the binding. I sold this attachment and bought a generic on eBay called top clean bottom raw. It’s half the thickness and you do have to tape it to the machine but the results are so much better, besides the attachment being so much cheaper as well. With a top clean bottom raw, basically the top is being folded while the underside is flat and the raw edge underneath is covered by the stitches of the machine.

I’m glad the video helps. It does take a bit of practice and I don’t know if your particular machine has a designated binding foot but check to see because the Brother does only if you buy the binding attachment. It helps tremendously because on the side of the foot is a flat guide to help keep the fabric from straying.

Glad the video helped.

Glad this video helps. With regards to your feed dog issue, it may seem like they go up and down but as long as the fabric feeds thru, the feed dogs are fine. They do move forward to help feed the fabric thru, it just may not be so noticeable.

Private message me thru my FB and I’ll help you thru it.

Glad it helps. Be sure to watch the others they should help you thru as well

So glad the video helped. You can always private me thru FB with any issues.

@@jeanetteweger5518 Thankyou.

You need to go thru a dealer, we’re here go thru Ken’s Sewing. Hope you can find what attachments you’re looking for.

Some actually use a hammer on thick seams to flatten them.

I’m so glad they are helping you. If you have issues please feel free to private message me and I’ll help you thru.

Hope it helps.

You’re welcome.

It should but again, don’t use jean thread, it’s too thick.

Glad this video helps.

Message me thru my FB and I’ll help you.

I have several videos on this machine that I think I’ve covered everything. Is there a particular issue you need addressed?

@@jeanetteweger5518 no not a one. I've seen them all. I just wondered about you. Happy new year 🎊

@@DiannaAtherton Happy New Year to you as well!

Hope the video helped.

And the bonus is now I have a couple yards of thread, instead of a bunch of cut up pieces

So glad this video helped!!

Glad the video helps.

1 1/4”, but it depends on what size your binder is. There should be 2 numbers stamped on the binder. The bigger number is what you cut the strip at, the smaller number is the finished after folded.

Thank you so much, watching you, I purchased the same one, and thank you so much, what's the setting on the machine??​@@jeanetteweger5518

I ask because, my fabric always goes side to side like it's not tight enough, and it's driving g me crazy... I have several different ones, but haven't tried them yet, because this one is for the brother coverstitch 2340cv. And I want it to work like yours... I am using four way stretch fabric... thank you so much....

@@tafaria128 it depends on the fabric what the setting will be, that’s why I always say to do sample runs with the fabric you are making the garment with. It eliminates problems on the actual garment.

I’m glad the video helps.

Here is his email Johny@awrcustom.com

A foot comes with the brother binder, it is a good thing to have. Brother will not and does not sell the foot separately. You have to buy the entire binder again to get a replacement foot and from what I understand, the binder is not over $100.00 so that’s an expensive foot. With knowing that, I found someone local to 3D print a binding foot that I use with the generic binder as it has a shield on the right side of the foot to keep the fabric from straying to the right while sewing. If you would like a foot, I can give you his information. He sells them on Etsy for $10.

⁠@@jeanetteweger5518 hello, do I need the foot to use this generic binder ? Or could I use the one that comes with the machine? Also could I have the link to the Etsy shop please

Glad the video helps. Be sure to watch the others because so many felt the same and really, 99% of the time it’s operator error. Just remember the machine does what you tell it. Any issues you can always PM me thru FB.

Glad it helps.