Відео

good day sir, i guess you can solve me my problem for laptop keyboard, how to contact you please i will pay

GL-NBK14-HY

How to use this for python code? I followed all the steps a long time ago, worked for a simple c code I did but when I am running in a python code for my orange pi, it days no module found named WiringPi (I tried several other interfaces like wiringpi, wiringOp, wiringop etc)

The green hue is a given. It can be fixed using the control board of a monitor to reset or calibrate the display. The screen will not turn on without a cpu or ram. So maybe the cpu or ram has been removed from the motherboard.

Those are expansion slots. It is used for expansion cards.

The synaptics or most touchpads for that matter use the PS/2 pin layout.

What you put some shields on the Mega, the 5V power is no longer available. How do you supply power with other pins to devices. It would help if you could supply some stl and ino files. A .great video. Thank you

that is my keyboard

Sir my laptop is demage and I want to convert touch pad and mouse into usb please tell me where I can buy this converter

Sir where i can buy this product can you tell me please

What is the p/n of the two boards and a link where you can buy them please?

Where did you get the handheld case?

What's the catch with the SD reader? Can a Mega2560 Rev 3 utilize the reader with SPI, if not is there a work around?

Are the Rinky Dink libraries still the best in 2023?

It says, permission denied 😢

please give me the code

What expansion board did you use?

what is the name of the converter ?

Thank you for posting this. I would love to see a follow up video with the Arduino controlling a relay based on input to the Arduino. In other words if I press one button the relay would be activated for one second. II press a second button the relay would be activated for 10 seconds and if I press a third button the relay would stay activated unless a separate signal told Relay to shut off. I am trying to control an AC motor that will raise a platform to various heights.

awesome showcase

Can you add an external power source to that 2 channel relay? So let's say you connect the 5v to Arduino then add an external Power source for another sensor or motor to the relay?

It is good you were able to get it to work. I was not able to. I keep getting errors. I suspect it was never updated to use python 3.

Hello, I’m trying to do something similar what type of adapter should I get for the lcd screen to raspberry pi.

can i put it up to 10 mins?

L plater here as well, why is Low sent? I thought it required High (5v or so) to actuate the relay? Took me a while to figure out what was wrong with mine. Thanks and great Tute.

what adaptor board is? thanks

Good video!! More like these brother!

I’m working with an NE555 adjustable timer switch. I have an eight AA battery pack witn an on off switch that goes through the triple five and feeds a push pull solenoid. when I turn the power on it initiates the solenoid so it fires once and it shuts off . What I want is to put power to it and instead of having to adjust a delay take the delay completely out of it but I need to ensure that there is no power after the initial fire to the solenoid without a reset. Any help would be wonderful.

bro your uplode schedule is every generation

Is it possible to run the TFT LCD screen without the shield?

What's the conversation board called?

Techlabz Keybox can do this over usb and bluetooth.

i own the Panasonic cf-31 toughbook.. sucks that theres no swappable floppy drive module for it

hope you upload more often , videos are very educational , could you revisit and see if you could do another pi laptop with today's availability of parts

1. I'd not go for an arduino - far too big cost. 2. Can you not pick a chip to manage or some EEPROM if chip won't work? 3. You can get ports online, solder it to a small PCB, and see what this chip requires to run via USB. Add a diode if you'd like for a security, or some other protection. Or to keep the cost low, even neglected ;).

Planning on turning a toughbook cf-19 into a pi top Looking for a backlit keyboard converter for USB also the touchpad converter for USB I'd appreciate any help you can give me thank you love you videos

deception in the title of the video. where is the working keyboard? most likely nothing works, tk. keyboards are different, the lines from the keys are different, you need an appropriate controller. even in the video you can see that the number of conductors in the connector does not fit ... how can this work and how can this be a solution !?

5th

You showed half of the relay setup. The easy half that is labeled on the relay. The other half is how to hook up to what you are triggering. A light,alarm,or pump etc. Do you provide power to what you are triggering. What if any power is ran through the actually relay. When to use normally open vs normally closed. How to set up using Arduino power if you are only triggering 3-5 volt source such as a 5 volt water pump or a 3 volt LED? Actually show it being of use not just making a click sound!

Can you convert a modern thinkpad chicklet keyboard to usb? I would seriously love to see that

What you all are looking for is teensy. Then you can map any keyboard.

I like it

Trying to repeat the step but it’s more than me specially the code

Hey man sup? What happened with DIY PiTop? Im trying to do a similar thing so it would be so great if you'd share your experiences.

This module name

I really enjoyed that video . Thanks

Thanks for a very great video.

Just Discovered Your Channel Few days back can't Believe That You uploaded After so many Years Enjoyed Your Laptop to Raspberry Pi Conversion Would Love can Updateon the Project

awesome