- 31
- 66 860
CringeMoto
Приєднався 6 січ 2024
i ride bikes
your unemployed friend at 2pm on a Wednesday:
After one of the footpegs on my Burromax mysteriously disappeared (totally had nothing to do with me crashing) I set out to find the best upgraded pegs for this bike.
Surron pegs will fit, but require a ton of grinding, and the springs don't work too well with them.
These new forged pegs from Burromax, however, are a direct bolt-on fit. I didn't weigh them, but they are substantially heavier than the stock pegs (which are cast metal). Between the forged construction and thicker material all around, these should hold up to any abuse you throw at them.
Install took less than 5 minutes for both.
Link to new pegs: burromax.com/performance-foot-peg-set-forged-part-10092-fits-tt1000r-tt1600r
Surron pegs will fit, but require a ton of grinding, and the springs don't work too well with them.
These new forged pegs from Burromax, however, are a direct bolt-on fit. I didn't weigh them, but they are substantially heavier than the stock pegs (which are cast metal). Between the forged construction and thicker material all around, these should hold up to any abuse you throw at them.
Install took less than 5 minutes for both.
Link to new pegs: burromax.com/performance-foot-peg-set-forged-part-10092-fits-tt1000r-tt1600r
Переглядів: 998
Відео
That Awkward Moment When Your Peg Falls Off
Переглядів 56121 день тому
If you listen closely you can hear the peg saying "ight imma head out" The Burromax didn't make it home in one piece this time... Hopefully the Surron pegs work out
72v RAZOR vs Golf Course Security
Переглядів 1,7 тис.28 днів тому
Took the 72v razor sx500 out for another offroad adventure, this time running into security at a not-so-abandoned golf course. Let me know what you think my next bike should be./ So far it's a toss up between the Rawr Mantis X and the Bombmoto B2
Burromax 1600 Brake Upgrade: Magura MT5 is a Game Changer!
Переглядів 428Місяць тому
Finally got around to upgrading the rear brake on my Burromax TT1600r. Used a Magura MT5 from Amazon. 10/10 would recommend.
This bike has TOO MUCH range! (Burromax x Fardriver Range Test)
Переглядів 346Місяць тому
Took the Fardriver swapped Burromax out for a little adventure to test the range. The results are not what I expected! Bike is running a Fardriver 72300 at 80amps and a beltsnshit belt-drive kit.
your Burromax needs this if you ride at night
Переглядів 369Місяць тому
Testing out a new headlight on the Burromax 1600 since i've been riding at night more often. Headlight: a.co/d/6uPLy82 XT90 Splitter (if wiring into stock bike): a.co/d/a5eBkM9 Wiring is super simple if you're using the same display I have on my Fardriver setup. Black to Negative, Red to Yellow from the Display. The yellow wire from the light is not used unless you want the light in low mode al...
I made my Burromax faster than a Surron! (Fardriver Install How-To)
Переглядів 2,2 тис.2 місяці тому
Here it is. The video we've all been waiting for. Spent the weekend installing a Fardriver 72300 into the Burromax. The bike is running beautifully, AND, all of the stock functions still work! Currently topping out at 48mph, but i've left some performance on the table for the sake of lower motor temps. Video timestamps: Below is a list of the parts used: Fardriver 72300 Controller: www.hotpaxx....
He brought a WHAT to the Surron group ride?!
Переглядів 4713 місяці тому
Took the Burromax out for another adventure. This time joined by a number of UA-cam celebrities. The beltsnshit belt drive conversion is still running beautifully. Highly recommend picking one up for your bike.
72v RAZOR takes on urban trails
Переглядів 2473 місяці тому
Took the 72v sx500 out to do a little exploring with the boys
he crashed a Surron right in front of me
Переглядів 8973 місяці тому
Took the Burromax out for a quick evening group ride. 40 miles on the belt drive kit so far with no issues.
Burromax gets a BELT DRIVE conversion!
Переглядів 2,8 тис.4 місяці тому
It's finally here! The belt drive conversion kit we've all been waiting for. Here's the install video and my first impressions. Stealth factor is much improved. Burromax 1600 Belt Drive Kit: beltsnshit.com/products/burromax-tt1600r-belt-drive-conversion-kit
Modified Razors take over a Surron group ride
Переглядів 4,1 тис.5 місяців тому
Finally took my 72v razor sx500 to a group ride and made some friends along the way.
I crashed my 72v Razor (skill issue?)
Переглядів 4745 місяців тому
I put new knobby tires on my 72v razor sx500 and it went horribly wrong! Skill issue? Maybe. The tires are actually pretty sweet though. MMG 10 x 3.00
Surron riders after watching Tokyo Drift:
Переглядів 2,7 тис.6 місяців тому
The Burromax joins another group ride. This time with working brakes! (I still crashed into things)
I raced a onewheel on my Burromax (and lost!)
Переглядів 7556 місяців тому
Crashed a onewheel group ride on my Burromax, but they accepted me as their own. Now I'm really itching for some extra power on this bike. Fardriver coming soon??
They saw my videos and still rented me this
Переглядів 2446 місяців тому
They saw my videos and still rented me this
I put a Surron seat on my 72v Razor!
Переглядів 1,7 тис.7 місяців тому
I put a Surron seat on my 72v Razor!
How far can my Burromax go on a full charge? (I got stranded...again)
Переглядів 3,8 тис.8 місяців тому
How far can my Burromax go on a full charge? (I got stranded...again)
This bike is MORE FUN than my 72v Razor!
Переглядів 3,1 тис.8 місяців тому
This bike is MORE FUN than my 72v Razor!
My 72v Razor Left me STRANDED Miles from Home
Переглядів 20 тис.8 місяців тому
My 72v Razor Left me STRANDED Miles from Home
Burromax Joins an E-bike Group Ride (Someone crashed!)
Переглядів 3,5 тис.9 місяців тому
Burromax Joins an E-bike Group Ride (Someone crashed!)
Burromax Tunnel Exploration (We both screamed!)
Переглядів 4 тис.9 місяців тому
Burromax Tunnel Exploration (We both screamed!)
Visiting the SKETCHIEST Public Park on a Pitbike
Переглядів 3569 місяців тому
Visiting the SKETCHIEST Public Park on a Pitbike
Movie Filming Locations on my Burromax
Переглядів 23510 місяців тому
Movie Filming Locations on my Burromax
what gloves are thos
@@cartergarypie pretty sure they’re an old version of the Sedici Antonio
what are your go pro settings!
@@Patricia.tejero pretty standard 4k30 ultra wide on a DJI Osmo4
When do you get your new bike
I put it together yesterday but I’m still waiting on my throttle to come in 😢
What kind of bike did you get?
@ Bombmoto B2
Nice video
I'm running a 280mm on my razor
The 50mm ZETA wide foot pegs that are made for the klx110 years 02-20 fit and are so much better. I put them on my 1600 with stock burromax hardware
@@IDKaboutallthat wish I had known this before I ordered! The surron pegs I bought are not a direct fit, they require grinding off ~2mm. But I have a set of forged pegs on the way from Burromax themselves
@ guess I gotta make sure I watch your videos sooner hah with how much you’re out riding I have a feeling you’ll be ordering another set sooner or later
Are these 3D printed mounts available to buy online somewhere or did you make em yourself? Please lmk because the SX500 seat is stifff 🙏
@@Joshyboi2.3 I got it from a guy named Tim Newton on the “Modified Razors for Adults” FB group
good ride! Got to see your peg fall off, food, graffiti and some nice cars!
That was the cleanest snap I've ever heard....geez! Glad your foot wasn't in between the peg and concrete..... could have been brutal! Just curious were you still going to do a video on that AliExpress speedometer? I may try to hook my fardriver controller up to my super73 with that speedometer! I did hook it up to a random battery I had lying around and it did come on but was just *Flashing* is that normal until I do a full hook up? Thanks bro, good video be safe!
@@knowEgo definitely will try to make a full vid on the speedo, still messing with the speed multiplier values, it’s gps accurate until ~40mph but off after that 🤷♂️. Not sure about the flashing, mine never did that
My pedal snapped in half yesterday after I hit a rock. Its solid metal
I can’t wait to get mine lol, how long does charging take?
@@nokapboby3861 I’ve never actually timed it, probably 4 hours
I don't know much about Burromax but most Pitbike style E Motos use a generic size for the pegs.
Damn you got lucky. I also have a E-Moto Pitbike and my peg snapped jumping a big speed bump going 35mph, luckily i didn't get hurt but i dragged my foot on the cement for a good 20 feet before i realized what happened 😂. Now i only rock Steel Pegs.
@@Tyomni_Ritsar oof. new fear unlocked
If you’re looking for a bigger bike the Electro & Company rtr seems to be able to do 14 rear and 17” fronts. I would try it but I already have a Ron. I am gonna probably keep it small and on 12/14 tires.
12"s are nice for torque. I switched to 14"s on my E Moto Pitbike and thought the torque is less now, the handling is so much nicer. I can barely feel bumps now like I did on my 12"s. All depends on your type of riding. I only run off road wheels because I love having the option to ride through dirt trails and forests.
Good advice. Thank you. I am mostly trying to not have the cops look twice.
@@bj97301 this is my concern too. Maybe I’ll get a vinyl wrap for the new bike to make it look like a razor
Genuinely love your videos. Just bought a 1600! Also rip to the foot peg...
HI
@@BIGBLUESLUG hi
100% get the mantis X i have it and it is the best dude i can answer any questions for you
I have the talaria xxx and its pretty lit just dont get the pedal kit like me its just really annoying and a extra 150 im going to take it off soon. Get dirt tires and pegs, black colorway and it flys under radar pretty good way more than the mantis x I think you will have cop trouble on that.
bomb moto is definitely more expensive but id get that over the mantis
i live in enfield
id really need this
how much
I really want to upgrade my razor but don’t want to go through the struggle of finding parts and learning how to wire every thing. How much are you going to sell yours for
Prolly like $1700. I just put together a spreadsheet of the parts and it was $2300 before taxes
SICK
Heads up the file is for if the motor shaft has any burs when installing the front pulley not so much for the rear pulley.
Did you mod this bike or did you just buy it from somewhere?
I modded it. I have a video where I go over the parts I used
I've been watching your vids and it motivated me to build one! Don't sell the razor, upgrade the suspension, wheels, and longer swingarm. It's cheaper (and arguably better) than buying a whole nother bike
I built a full razor and then upgraded to a b2 it’s way better even if the razor is fully upgraded as the razors can’t handle a lot
@ wym can't handle a lot? As in the frame can't handle the power or there's not enough space for upgrades?
@@mc.yohann it’s too much power for the razor, and I broken mounting bolts to the motor many times and had small cracks after doing some small jumps
@ ahh I see, I never seen razor frames breaching because all razors I've seen are used for street riding and not jumps and stuff.
@@mc.yohann yea but all that money for suspension and the power just for it be a street bike. Like I used it for both, it handled okay off road but is a better off as a street bike
I would look at the new ETM trail machine RTR 72v 2,700 if you can get one in stock
You should get a stark Varg it has 80 horsepower
@@Zman574 😂
Great video and thanks for all the info
You should check out the Electro & Company rtr
@@bj97301 ooh I like the easily swappable battery
@@CringeMotodat price too. And 8kw…
Been there. Golf courses hate people who have fun.
You could consider turning the razor into a more capable bike off road by putting 17-14 on it like the bomb moto. Throw on an electrocycle extension, bigger shock, 735mm front forks, and you'll be able to fit em.
@@alexhanson6032 just looks goofy with the small plastics. Maybe swap to crf110 plastics?
@@CringeMotocrf110 plastics look amazing on the razors
Could you screen shot your settings
How did u adjust to mph and get speedometer accurate?
@@mycryptolife1292 display settings are in the description
Hi there where can I buy a far driver ?
@@arceecorso I got mine from hotpaxx. Link in description
cant go wrong with megura mt5s my favorite breaks! Love THE VID!
Air compressor will pop the grips off fairly easily
For the handlebars.. use adjustable pliers and twist, don’t pull.
@@IDKaboutallthat it made me self conscious. Went to the gym right afterwards
@@CringeMotohaha yea same happened when I got the full grip throttle and the half grip didn’t want to come off, I was surprised. Did not hit the gym afterwards tho lol
This is how the tt1600r should come stock 👏🏽
This looks awesome
yo if you dont mind me ask could you put a link for the bike?
@@aidyn27 burromax.com/electric-mini-bike-tt1600r-lithium-ion-powered-color-white-carbon-fiber
You should try the burrowmax plug and play kit from momentum watts
You think 1000w 36v e bike is good ?
Awesome video!
Not going lie I kinda been waiting to see this bike back out since you upgraded it.👍🏽😎
Should upgrade those brakes
@@Burronster finally got my Magura mt5 in!
Puttn in some work on dat bike. Love it 😍
Yes! long video.
Hey what’s the kit you used for cuz I haven’t found any like yours Also how much was the kit?
@@eliasbrown2010 it wasn’t a kit, I pieced it together from multiple vendors. Motor $130 (Aliexpress), Fardriver $150 (HotPaxx), Battery $600 (Amorge), Throttle $35 (Electro and Co), Forks $100 (Amazon), Rear Shock $100 (Amazon/Fox). I’d recommend HotPaxx if your looking for something plug and play, their prices are better than anyone else.
@@CringeMotois the reason your chain fell because your running the stock chain and sprocket?
@@Huckeys2 it’s because I removed the plastic chain guard that goes around the rear sprocket. Since I put that back on I haven’t had any issues.
@@CringeMoto do you have an upgraded chain and sprocket or stock?