Відео

Excellent commentary and has educated me as to what happens and what needs to happen regarding the cooling system and expansion tank.

great video.... does Heat control valve also responsible for cold air? ...from SOUTH AFRICA

Works for BMW 2013 3 Series. You're literally a god

Did You solve the problem with temperature diffrence in vents?

Bouta dig in 2 this lil biddy!! On the finest fri the day !! Hot as f!!

The fuck is cabin air filter $128, it's literally 3 tabs to push on a Sportwagen...

Your also supposed to keep the transmission temp between 35 and 45 Celsius using a code reader with live data. If you get transmission too hot the fluid would expand to much and your fluid will actually be low. Good job otherwise. Being low is just as bad as being too full.

Learn from his mistakes. I had excess adhesive from old one, used goo gone to get rid of it. Plastic razor blade was clutch to have as well. Lay it in the sn for sure. Super easy.

Doubtful that stainless steel was the right choice. If you don't use anti sieze it's possible that you never got it tight. It could have just galled. Check out AVE's video on galling.

the metal clips just push down for quick release no need to pry them outwards

It's a brilliant video ! Thank you ! This gives me confidence to have a go and tune my carbs !

I saw this yesterday and i tried today, thank you man, thank you.

What is the service manual you are using

Can you tell me what service manual you are using

Following this fix, did jr confirm whether it fixed his issue? 0:02

Hello. Can someone please confirm if the VQ25DE uses the same size rocker valve covers? Thank you.

How did that Dorman pump work? I’m Hearing a lot of bad things about it

Thanks! It worked after restarting the phone

THanks from France, I was watching all the videos to change my water pump and thermostat and was very surprised to see that it was reinforced... Of course it is a convertible. Thanks a lot for your video

What model is that kubota rtv?

very interesting video, strange case of uneven temps on vents, glad to hear you fixed it, thanks fir sharing 👍

From Lebanon, thank you very much. I followed your steps and the antenna was repaired. Thank you very much

I just did it as shown in video. The hardest part for me was twisting the mirror back on. The great news is IT WORKED! Mine had no discoloring or dirt but I wiped the antenna and parts with an alcohol wipe (for lenses). Very happy and thankful for this video.

I will be trying this asap on my 2011 E93. After watching this video I put my fob against the windshield on the rear view mirror area and touched the door handle. It locked and unlocked with each touch. I have a feeling following this video will solve my problem.

Thanks!

Great video👍sir, how can we contact you🤩🤩

Gotta do this soon on mine 😓

Advice from someone who just did this maintenance! The drain pan bolt closest to the center front of the car is a thru hole so the steel screw can become fused to the aluminium housing making it very difficult to remove. Make sure you apply lots of penetrating lubricant to the TOP side of the hole where the threads are days or hours before you do this job. I was not lucky and the bolt head snapped off, then when I was trying to remove the rest of the bolt the rest of it broke off so I had to drill it out. Thankfully its a thru hole so I was able to put a nut on the backside becuase the threads were destroyed trying to remove the bolt. If you 're going to do this maintenance just flush all the fluid (buy 6qts) , no sense only doing 3 qts if you've got it set up. To clarify to the video, the car needs to be as close to perfectly level as possible, front to back and side to side. You should be flushing the fluid while the car is running and reinstalling the drain bolt WHILE the car is running. if you shut the car off without the drain bolt in place a bunch of fluid drains out and you don't want that. I was nervous about crawling under a running car but that just what has to be done, stay safe. The drain bolt washer has an up-side and a down side, the slooth side without the ridge makes contant with the drain pan. The car shifts way better than before and the fluid that came out was dark black so it was worth it.

Hi I was watching this video, My horn goes too. I have not check the fuse yet and if the fuse is good I have to access like the way you show on this video. Mind is 2014 534xi M sport. Since my f32 just like your with an oil cooler and is there enough room to the back and take the horn out ?

Very interesting do we need to change that charcal after some years ? And that dust filter ? :)

Great job, preparing to do it outside as i don't have car garage.

I bought an auc sensor off eBay for like $30 cause I didn’t see it on fcpeuro and I’m like if it doesn’t work oh well. It finally arrived today after a month maybe (china) the part was a bit different but connection was the same and my code is gone! Just two more codes to fix. I had 2aaf which I still do. I replaced the pressure switch thing but I still have the code sadly

I'm not sure why the volume doesn't work on the pioneer double din everything else works on my 04 G35??

videos like this are why I love youtube. My 17 AT had a puddle on the trunk cover after a storm today. I'll have to check it out this weekend and your video will be my reference. Thank you!

I being struggling with VALVE FUEL TANK VENT, i did a bunch of things like smoke test it came out good,no leaks i change the EVAP part that goes in the engine area(2times) and i still cant figure out what’s causing that code.

Thanks❤ it works🎉

I own a 2013 328I hardtop I have the same issue with latch very good information

hola, algun cambio en los LTFT?

✌️ *Promosm*

Does it work on bmw e93 2009 ?

En iphone como puedes hacerlo ?

Hi JR Thanks for making these MGC videos, as you already mentioned, these engine restraints were an original part fitted to our cars, however over the years they get removed and left off. As you said their sole purpose is to stop the very heavy engine/gearbox from sliding forward in the event of a sudden stop/accident. I also purchased mine from Simon at Colne Classics in the UK, one of our top specialists on MGCs.

Just done it, mine was exactly the same I had to be touching the car for it to work and mine now works , Thankyou so much 👍

Just followed your DIY video and fixed my 2011 E93 cabrio glovebox. Thank you 🙂

Nice Video! I just picked up a 2010 335i e93 that desperately needs this... Thank you!!

Thanks!

This video is very informative thanks

Do you need to bleed the coolant system after replacing the valve?

I’ve had fuel dump into my canister 3 times now …. Any ideas?

Wha if im not planning to use the bose system can i still use this and then connect the amp with the stereos RCA?'