Відео

The STL file was free. I did this for $130. FDM print too. A lot of sanding was involved.

@@MARKDUBS.3DPRINTING thx great job

I do not sell these, unfortunately. However, the link for the .STLs are listed in the video description. If you or a friend can 3D print it, I would start there.

Thank you very much!

Between the cost of silicone, a gallon of 2-part resin, and other materials, roughly $200. However, from that gallon of resin, I was able to cast 4-5 helmets. Also, this method was borrowed from another maker on Etsy. He made a tutorial where he mentioned that from one of his existing molds, he had already pulled some 70 casts from it already and the silicone was still holding up. Definitely something to look into if you’re wanting to make a ton of carbon copies fast.

@@MARKDUBS.3DPRINTING could you link that tutorial? and thanks for replying this is good to know

They’re lamp bases with RBG bulbs. I basically glued lampshades to the inside of them.

@@MARKDUBS.3DPRINTING that's dope. Love to see a video on that. Never seen one but then again, never looked.

nvm....just looked at th pic again. didn't realize it was a lamp on the desk. thought it was wall mounted.

There’s an upcoming Bo Katan video that I’ll be releasing next month. If you want me too, I’ll include a tutorial at the end of the video on how I turned the helmets into lampshades.

@@MARKDUBS.3DPRINTING ...a little..."and this is how i display it" segment. 👍

Glad you like it!

I recommend applying graphite after the paint has completely dried. Thank you 🙂

Yes

@@MARKDUBS.3DPRINTING that's so amazing 🔥🔥, will you make a full video about it? It would be really great. And where can I find this model?

Free download for this model can be found at cults3d.com/en/3d-model/art/inosuke-hashibira-mati_navarro03 I will keep that idea on retainer for now. I would love to make a full video. Currently though, I’m working on a few different helmet builds so those will be the next few uploads.

@@MARKDUBS.3DPRINTING can't wait for the new videos🔥, until you maybe upload a similar video in the future can I at least know how did you get inosuke so smooth tho?

​@@marawanharraz2310I ​first sprayed it with sandable filler primer, then sanded with 320 grit sandpaper a couple of times. Then I sprayed one last time but sanded with 600 grit. Most of the layer lines were gone by then. As I added additional layers of paint, most of the remaining lines seemed disappear. I also sprayed this model with a couple of coats of matte finish clear coat at the very end which is what I believe made it come out as smooth as it did.

Thank you 😊

Thank you! 🙂

No worries. In Cura, make sure that the infill pattern for your model is set to "grid". Also, make sure that the infill percentage is set to 20%. Finally, as long as you're printing all of the parts vertically, the empty space for you to insert the metal rods should be there.

Sure thing! So when I loaded the individual sections of the sword into Cura, they were auto-scaled to 10000% of their original size.

Many many thanks 🙏🏼

Many many thanks 🙏🏼

I’m glad that you liked the project. I did actually consider using a higher viscosity liquid. There are fish tank-cooled PCs that contain Mineral Oil. Mineral oil is odorless, completely clear, and non-conductive. By the sounds of it, if you’re planning on running wiring to the facehugger to make it animated, the non-conductive property would make mineral oil a great choice.

@@MARKDUBS.3DPRINTING there will be just a link to a servo that will move randomly (powered by arduino) and will act as air pump also. The facehugger will be articulated and it will shake with servo fast moves. I want to keep it simple ! :) Thanks for your advice on mineral oil. Will look at that for sure ! Keep up the good work.

This is very much appreciated 🙂

Thank you! 🙂

I'm glad that you enjoyed the video!

A detail that was perhaps, overlooked. I’m glad that you still liked the video.

@@MARKDUBS.3DPRINTING It made me laugh :D I was wanting to hear you lol. But yeah nice video man, helmet looks good

From the maker, himself. I am certainly honored. I'm happy that you enjoyed the overall quality of everything. Also, thank you for for creating such an amazing model!

@@MARKDUBS.3DPRINTING my pleasure, i truly enjoyed watching this :) cant wait for more :)

Thank you!

Thank you!

As always, thank you 😊

Thank yooo! 🙂

Rust-Oleum Metallic Spray Paint www.amazon.com/Rust-Oleum-7718830-7718-830-Automotive-Accessories/dp/B000Z8DGXK/ref=sr_1_2?crid=3GG249ZDP7K60&keywords=rustoleum+chrome&qid=1648956464&sprefix=rustoleum+chrome%2Caps%2C95&sr=8-2

​​@@MARKDUBS.3DPRINTINGdid you make bobb fett hlnet as kid ever I nevervdud though lind wish of coukd gav but th I got lightsaber rot but never made lightsshervif my own crsatiob or imgbation lil is f ever tek my own lightsshervif my iwn seing in hav blacknhilt invasion darth vadervhilt but chaos a grewn blade and a nics grip peice fir th grip and nice which hilt in bkack colurveitj grewn blade and nice with I could evee mske nob get hdlm.i could way just use cardboard and foam but I don't I b utnevervtried befire