Mike's 84 Corvette
Mike's 84 Corvette
  • 55
  • 178 772
Easy Project? Sun Visor Replacement
This should be an easy job. But like most projects - it was a bit harder than I anticipated.
Переглядів: 776

Відео

1000 subs! THANK YOU!
Переглядів 290Рік тому
Took me a while - but I reached 1000 subs! Thanks to everyone for subscribing, liking, and commenting. More videos to come!!
2023 Corvette Takeover - Over 400 Corvettes!
Переглядів 473Рік тому
Went to the biggest all-Corvette show in NJ. A great day with over 400 Corvettes. Here's a quick walk-around!
C4 Corvette Back Up Camera Installation and Review
Переглядів 2,8 тис.Рік тому
Everyone loves their back-up cameras right? Why not add one to a C4 Corvette? This one is inexpensive, easy to install, and works well.
Do All Mazdas Rust? 2011 Mazda CX-9 Rust Remediation.
Переглядів 245Рік тому
Mazda's "had" a bad reputation as rusters. Things have gotten better but not perfect. I noticed a bunch of surface rust on under body parts on my 2011 CX-9 while changing the oil. I scraped it off and applied a rust inhibitor hoping to delay any further damage.
Outback Gets the AvalonKing Ceramic Coating Treatment
Переглядів 68Рік тому
AvalonKing saw my recent videos where I used their ceramic coating kit and asked if I could coat a "newer" car. So, I gave my son's 2021 Outback a good cleaning and prep and put down a nice ceramic coating.
Oil Pressure Sender Removal - C4 Corvette
Переглядів 6 тис.Рік тому
Last time I did an oil changed I noticed oil seeping down on to the oil pan. Sometimes these oil leaks can be traced back to the oil pressure sender which, over time, can leak. It looked like mine was covered in oil and grime so I decided to replace it.
New Ramps and Oil Change
Переглядів 1,6 тис.Рік тому
Oil changes are pretty boring and routine - but this time I have new ramps to help make the job easier.
Glaze - Not Just for Doughnuts!
Переглядів 2282 роки тому
I'm always trying different products to see if they can make the paint on my 84 Corvette look any better. This time I tried an automotive glaze polish to see what it would do.
C4 Corvette Retro Radio Installation & Review
Переглядів 8 тис.2 роки тому
The original AM/FM stereo cassette player in my 84 Corvette was pretty much dead. I wanted to replace it with something that had modern tech but still looked period correct. This "retro" radio worked out perfectly!
AvalonKing Armor Shield Lite Ceramic Spray - Product Overview
Переглядів 6302 роки тому
Ceramic coating your car makes it look great - but can be time consuming. Ceramic Lite Spray promises most of the benefits - with less of the work!
Can a Harbor Freight Fluid Extractor Make a C4 CORVETTE Cooling System Flush Easier?
Переглядів 1,7 тис.2 роки тому
I wanted to flush my cooling system, replace my thermostat, and the lower radiator hose to get ready for summer. Not wanting to make a huge mess I tried a Harbor Freight fluid extractor. It worked great - but unfortunately I need more tools and space to really do it right next time. I DID replace the other parts successfully!
Fixing Leaky Corvette Heater Control Valve
Переглядів 2,5 тис.2 роки тому
The Corvette heater control valve is prone to leaking. Finding the exact replacement part is near impossible. There is a way to fix the leak by using parts from another heater control valve and replacing the leaky parts in the original unit.
Santa Gave Me a CUPHOLDER for My C4 CORVETTE - Let's Check it Out!
Переглядів 1,1 тис.2 роки тому
The cupholders in the C4 Corvette are pretty pitiful. For Christmas Santa gave me this cool new cupholder. Will it work? Let's take it for a test drive. Amazon link for cupholder: amzn.to/3mzPq3L
5 (Actually 4) Projects for Now and Later on My C4 CORVETTE
Переглядів 9972 роки тому
I've got some stuff to do on my 84 Corvette. One project was easy, the next project is just a big question, the third one hopefully won't cost me $$$, the fourth one fixed itself (is that possible?) and the last one looks like a win -except for some faulty packaging.
Get The LEAVES out - Cleaning the GAP Between RADIATOR and AC Condenser on my C4 CORVETTE
Переглядів 2,4 тис.2 роки тому
Get The LEAVES out - Cleaning the GAP Between RADIATOR and AC Condenser on my C4 CORVETTE
Battling the Window Rattling on My C4 CORVETTE
Переглядів 7 тис.2 роки тому
Battling the Window Rattling on My C4 CORVETTE
Corvette Club Auto Show - Walk Around
Переглядів 4243 роки тому
Corvette Club Auto Show - Walk Around
Cleaning Suspension, Under Hood, and Inside Bits - Car Show Ready?
Переглядів 7433 роки тому
Cleaning Suspension, Under Hood, and Inside Bits - Car Show Ready?
Channel Update - or - Where the Heck Have I Been?
Переглядів 1913 роки тому
Channel Update - or - Where the Heck Have I Been?
Radiator Hose Replacement
Переглядів 6743 роки тому
Radiator Hose Replacement
Ebb and Flow - or Why Isn't My Radiator Working Correctly?
Переглядів 5143 роки тому
Ebb and Flow - or Why Isn't My Radiator Working Correctly?
Air Intake Modification - or - I Cut a Hole in My Car! - Mike's 84 Corvette
Переглядів 4,9 тис.3 роки тому
Air Intake Modification - or - I Cut a Hole in My Car! - Mike's 84 Corvette
Corvette Takeover Round 5 - Mike's 84 Corvette
Переглядів 7043 роки тому
Corvette Takeover Round 5 - Mike's 84 Corvette
Changing 84 Fuel Pump to an 85 Model - Any Difference? Mike's 84 Corvette
Переглядів 5 тис.3 роки тому
Changing 84 Fuel Pump to an 85 Model - Any Difference? Mike's 84 Corvette
Polishing Old Corvette Rims - Mike's 84 Corvette
Переглядів 7 тис.3 роки тому
Polishing Old Corvette Rims - Mike's 84 Corvette
Ceramic Coating - Is it worth it? Mike's 84 Corvette
Переглядів 1,3 тис.3 роки тому
Ceramic Coating - Is it worth it? Mike's 84 Corvette
Fender Skirt Repair and Repaint - Mike's 84 Corvette
Переглядів 4953 роки тому
Fender Skirt Repair and Repaint - Mike's 84 Corvette
Battery Tender Installation - Mike's 84 Corvette
Переглядів 5823 роки тому
Battery Tender Installation - Mike's 84 Corvette
Fixing My Crappy Plastic Snow Blower - Mike's 84 Corvette
Переглядів 2023 роки тому
Fixing My Crappy Plastic Snow Blower - Mike's 84 Corvette

КОМЕНТАРІ

  • @dicklarge1901
    @dicklarge1901 5 днів тому

    I removed my sun visors and left them off. Hey why no new videos did you die?

  • @anthonygray333
    @anthonygray333 21 день тому

    Awesome! My TPS died and just started dumping fuel into the pots. I disconnected it and surprisingly it ran to get me home. Had no idea the positioning was so critical. Now I do!

    • @Mikes84Corvette
      @Mikes84Corvette 17 днів тому

      Nice! Glad to hear you got it all sorted out.

  • @sportblort1021
    @sportblort1021 Місяць тому

    It's interesting seeing how the crossfire system works up close. I actually have an '82, and it's pretty hard to find content on the L83s that isn't just ragging on it. Cool stuff

  • @garrebearr3184
    @garrebearr3184 Місяць тому

    Hey Mike! Thanks for the video. Do you know what parts you ordered on eBay for the male and female pin connector ends? I’m trying to make a harness myself so I can dial this in. Thank you!

    • @nepneppy9626
      @nepneppy9626 Місяць тому

      Lmk if you figure out! Need the same info

    • @Mikes84Corvette
      @Mikes84Corvette Місяць тому

      I found them on eBay 4 years ago. Weatherpak female terminals 20 - 18 gauge Chevrolet GM wiring wire terminals type 7 male 18 - 20 gauge Good luck!

    • @nepneppy9626
      @nepneppy9626 Місяць тому

      @@Mikes84Corvette thank you Mike! I’m trying to get this corvette back to life and this was the last thing it needed. Hopefully it works

    • @Mikes84Corvette
      @Mikes84Corvette Місяць тому

      @@nepneppy9626 I hope you can find them - let me know!

    • @nepneppy9626
      @nepneppy9626 Місяць тому

      @@Mikes84Corvette I did and got it all ready. I found out my problem isn’t with the actual tps. The ecu is sending 5 volts and the ground is grounding but the positive wire is giving out nothing.

  • @fuckthefuture6215
    @fuckthefuture6215 Місяць тому

    Thank you for your video Mike! I enjoyed very much your explanation about crossfire injection and also I think you have a great and funny personality! Only 46 seconds of video were enough for me to became a subscriber. Best of luck for you and your beloved c4

  • @danieljurgill1681
    @danieljurgill1681 2 місяці тому

    We need a good CLOSE UP VIEW. You cannot tell where you connected to , what the original wire colors are. You did not check for 5 volts on one wire, you did not compare the ground wire with the battery ground to determine if the ground wire to the ecm and ecm ground to the battery were the same.

  • @lilshovel6897
    @lilshovel6897 2 місяці тому

    Hey what do the light pink, dark pink, and white wire go to I was changing the radio out on my 84’ and I was left with 3 wires that I don’t know what they go too. I have the Bose system from factory so maybe they go too the dash speakers?

    • @Mikes84Corvette
      @Mikes84Corvette 2 місяці тому

      I’m sorry but I don’t know the answer. Good luck!

  • @ianblack-u4h
    @ianblack-u4h 2 місяці тому

    Brill mike .....mine was running rough.... followed your method ...wooow sweet as now....cheers bud....

  • @GaryLayton-f2v
    @GaryLayton-f2v 2 місяці тому

    What stereo is this? Can someone add the link for it

    • @Mikes84Corvette
      @Mikes84Corvette 2 місяці тому

      This is it www.retromanufacturing.com/collections/vehicle-search/products/1984-89-chevrolet-corvette-newport-1-5-din-direct-fit-radio

  • @peekaboo1575
    @peekaboo1575 4 місяці тому

    Fascinating piece of tech.

  • @AlexxMichael
    @AlexxMichael 4 місяці тому

    does your car have the Bose system ? Did you keep the Bose speakers in the car ?

    • @Mikes84Corvette
      @Mikes84Corvette 4 місяці тому

      No it did not have the Bose system and speakers.

  • @stevegili
    @stevegili 4 місяці тому

    My coolant reserve is very low so I fill that all the way? I’ve ended had to fill the reservoir

    • @Mikes84Corvette
      @Mikes84Corvette 4 місяці тому

      There are lines for cold or hot fill.

    • @stevegili
      @stevegili 4 місяці тому

      @@Mikes84Corvette it was hard to see but I see it now that there’s sunlight lol last night I was Devon’s home and all of a sudden coolant spikes to 260-270 max. I pulled in and let her sit. I found my cool was low and my radiator fluid was very low in the reservoir

  • @Icysaucydog69
    @Icysaucydog69 4 місяці тому

    Great vid

  • @gamerscubeixxi2152
    @gamerscubeixxi2152 4 місяці тому

    Just curious, how is the crossfire injection treating you? That was quite problematic. I was wondering if it was any better on the vettes

  • @gamerscubeixxi2152
    @gamerscubeixxi2152 4 місяці тому

    Harbor freight has great deals on tools and an amazing warranty for Pittsburgh products

  • @acoop4884
    @acoop4884 5 місяців тому

    easy removal and installation... is right under the car ..... just drop the antenna down removing the two nuts on the support bracket reach up and unscrew the plastic screw- on mounting cap at the top of the antenna.. that is the hardest part.. it's a stretch to reach it.. instead of trying to get the antenna cable out remove the two small screws that hold it to the antenna housing itself and it comes right off.. there are 3 wires going to the antenna... just clip each wire and before you reinstall the antenna add about 5 inches of wire to each wire you clipped... that will give you plenty of wire to play with and recrimp each wire back together and tape over the newly crimped wires... removal and reinstall less than an hour.... you don't even have to jack up the car

  • @stevenoliviero3652
    @stevenoliviero3652 5 місяців тому

    The absolute Worst manual transmission ever made was replaced with ZF 6 Speed in 1989

  • @Joe8648
    @Joe8648 5 місяців тому

    Who did your pin stripe on your car ? Obviously not factory but it looks good I might just do that on my 85 when I get it repainted.

    • @Mikes84Corvette
      @Mikes84Corvette 5 місяців тому

      I don’t know! It was there when I bought the car.

  • @jgg681
    @jgg681 5 місяців тому

    Yo Mike I got an 84 corvette from my mom, it was my grandfathers, it doesn’t start it turns over but we’re gonna work on the injectors and what now, I’m glad to see someone with the same model

    • @Mikes84Corvette
      @Mikes84Corvette 5 місяців тому

      Nice! Good luck with it!!

    • @jgg681
      @jgg681 5 місяців тому

      @@Mikes84Corvette I’ll give you an update, got the injectors. Just gotta try and put them in tomorrow and we’ll see what happens, next up on the list is the fuel filter and pump

  • @sammycatstudios2951
    @sammycatstudios2951 5 місяців тому

    Why are you selling it

  • @acoop4884
    @acoop4884 5 місяців тому

    Just noticed yesterday he has it listed on Craigslist in North Jersey for $4500.00....

  • @catsass99
    @catsass99 5 місяців тому

    1982 0:47

  • @Cory-hj5yb
    @Cory-hj5yb 6 місяців тому

    What number are the bigger bulb?

  • @beartn
    @beartn 6 місяців тому

    Do you still plan on posting new vids? It's been awhile... 😓

  • @richarkun579
    @richarkun579 6 місяців тому

    Love the videos, Mike! I just bought an 84’ Corvette with the crossfire engine as well. I’m in Edison, NJ.

  • @TJJorg
    @TJJorg 6 місяців тому

    Hey Mike, mine reads 506 no matter the position I have it in. Any suggestions?

  • @michaelkinsey8867
    @michaelkinsey8867 6 місяців тому

    do you have anything on disabling alarm system?

  • @Joe8648
    @Joe8648 6 місяців тому

    I'm having the same issue with my 85 Corvette and honestly that is one feature of a car I have never liked and is a power antenna to they always break and are a pain to remove as and fix id just assume have a regular mast antenna on the car it won't affect the aero dynamics or look of the car in my opinion and never have to fix it unless it some how gets broken off.

  • @joshlavallee8139
    @joshlavallee8139 6 місяців тому

    Great video! Looking to install a Newport into my 87 C4. Nicely done!

    • @Mikes84Corvette
      @Mikes84Corvette 6 місяців тому

      Thanks! Good luck with the installation.

  • @KonradG-o7c
    @KonradG-o7c 7 місяців тому

    is it really necessary to remove the wiper motor? I am struggling to remove the electric plug on top of the wiper motor, it wont come out, possibly the connectors rusted on ? i dont want to force it and break something....

    • @Mikes84Corvette
      @Mikes84Corvette 7 місяців тому

      I suppose if you can’t get that plug out you might be able to at least move the motor out of the way somewhat. Makes the job easier

  • @ronalddelveaux8180
    @ronalddelveaux8180 7 місяців тому

    When you disassembled/reassembled the struts, you only show the washer and clip on each side. You do not show the spacers at each end of the strut and if there is also a washer on the "head-end" of the pin. I would like to see all the strut parts that are part of the assembly. Thanks.

    • @ronalddelveaux8180
      @ronalddelveaux8180 7 місяців тому

      After watching more videos I do see that the spacers are integral to the brackets. It would be nice to know the dimensions of the spacer, particularly the length of the spacer (distance between bracket and the end of the spacer where the strut contacts the spacer.

  • @TJJorg
    @TJJorg 7 місяців тому

    Thank you, but I wish I could see it lit up

  • @nickolaskostopulos5806
    @nickolaskostopulos5806 8 місяців тому

    I got rear window louvers that are made for your 84 I didn’t like em with my ground affects kit I had done I paid almost 500 from the ecklers I’d let you get em cheap if your interested get ahold of me

    • @Mikes84Corvette
      @Mikes84Corvette 7 місяців тому

      Thanks for the offer but not interested.

  • @Michael_Lorenson
    @Michael_Lorenson 8 місяців тому

    Easy-peasy!

  • @Michael_Lorenson
    @Michael_Lorenson 8 місяців тому

    Thanks, Mike

  • @Michael_Lorenson
    @Michael_Lorenson 8 місяців тому

    Cool, thanks. I'm currently refurbishing a 1988 manual coupe, in which I'm happy to have the L98 TPI engine with aluminum heads. It's a nice improvement over the 1984 L83 Crossfire setup. But, I'm really glad that some guys, like you, have decided to preserve original 1984 C4s, even though the Crossfire system (and some other quirks) can be a pain to deal with.

  • @nyernga
    @nyernga 8 місяців тому

    Had issues with my 88 Vette with old dougies trans. First problem is if it needs work, good luck finding a shop to work on it. When it worked properly is was fun to drive even more so than my current 2000 six speed because I didn't have to depress the clutch pedal to get into a higher gear. I even wired mine to operate in first gear. Mine had the switch in the shifter

  • @linkedup7346
    @linkedup7346 8 місяців тому

    cool video Mike, I have a 1985 and just received 2 new struts. Cant wait to install them now...

  • @The_sinner_Jim_Whitney
    @The_sinner_Jim_Whitney 8 місяців тому

    Wouldn't like a Gear Vendors-style box (or, I suppose, like a 2-speed Brownie box if you're familiar with heavy trucks) be just as effective and simpler? Or is it more or less the same thing?

  • @DanielHixson-w7l
    @DanielHixson-w7l 8 місяців тому

    My taillights say 83 to

  • @coryplace6965
    @coryplace6965 8 місяців тому

    Ty for your videos helped me out alot

  • @davidstepeck2644
    @davidstepeck2644 9 місяців тому

    It would have been nice to see you attach the shifter boot.

  • @CamaroSunray
    @CamaroSunray 9 місяців тому

    Like the ram air system

  • @LoudC4
    @LoudC4 9 місяців тому

    I need to do this on my 84. Do you have a link for the antenna?

  • @kaboomer4297
    @kaboomer4297 9 місяців тому

    Hey Mike, great video, learned a lot! Had a cross-fire in an old Z-28 I bought for my wife. Ran great, lots of low end torque. Such a simple F.I. system... Thanks from a former resident of Ridgewood in Bergen County, up near Saddle River and the NY state line...

  • @claus03767
    @claus03767 9 місяців тому

    Hallo, wie bekomme ich die Mutter bzw. das Teil raus welches Sie in der Hand halten wie beide Antenne nebeneinander liegen. Die Mutter unterhalb des Kotflügel und die Antenne mit der Kunststoffmutter befestigt ist. Für eine Information würde ich mich freuen, danke Claus

  • @jeffspicolli593
    @jeffspicolli593 9 місяців тому

    Excellent. Thanks for taking the time to post this.

  • @KingOdin1028
    @KingOdin1028 9 місяців тому

    You need a camera mount. Let’s fully commit to this UA-cam channel about your corvette.

  • @alfderbabybenz7092
    @alfderbabybenz7092 10 місяців тому

    looks very cheap...

    • @Mikes84Corvette
      @Mikes84Corvette 10 місяців тому

      Works great!!

    • @alfderbabybenz7092
      @alfderbabybenz7092 9 місяців тому

      Which is sadly not all I want from an aftermarket radio in a classic car.@@Mikes84Corvette

    • @Kathaar
      @Kathaar 8 місяців тому

      There's a chrome plated one if you want to go that route but the standard black plastic model looks exactly like all the other cheap black plastic in the car - in other words, it looks like a perfect fit.@@alfderbabybenz7092

  • @C0untAce
    @C0untAce 10 місяців тому

    Hello, great video! Do you know part number of screws/stud, self tapping of antenna bracket please?

    • @Mikes84Corvette
      @Mikes84Corvette 10 місяців тому

      Sorry I don’t know the part number.