Cinema Repository
Cinema Repository
  • 85
  • 215 768
ORWO NC400 Initial Test
This is our first test, of the slightly more orange layer OWRO stock called NC400. It's a 400 ISO stock similar to the NC500, however it has a more orange emulsion layer, making the colors be more vibrant and closer to other stocks from Kodak. This test shows two clips at the beginning, off the scanner and then corrected, the other clips are only corrected. The common perforation issues and wobble we saw with NC500 are present in this stock as well. There is no difference, thus we didn't bother showing the perforations.
Stock was shot at 200 ISO because several other tests by. other people, conformed 200 ISO to be the best density wise and we agree with this initial assessment. NC500 was improperly rated as well, so we shot everything in this test at 200 ISO and it appears to be good.
We will have a more comprehensive test shortly, we are still shooting that part of the test.
Переглядів: 809

Відео

Faded/Damaged 16mm print restoration
Переглядів 2 тис.Рік тому
Here is a step by step video which discusses the restoration of some faded and damaged film we recently scanned. For more information about this process and costs, please visit our website www.narrowgaugefilms.com for more information
Post Stabilizing Samples DaVinci Resolve
Переглядів 415Рік тому
As part of our ongoing series of shooting on film, here are some samples of before and after, on shots which were a failure on set, but were easily fixed to be made usable in post using DaVinci Resolve.
Denver and Rio Grande 476 to Silverton 4k Kodak 16mm
Переглядів 1,2 тис.Рік тому
Durango and Silverton is a very special railroad. Located in the south west part of Colorado, it's one of the last remaining sections of the original Denver and Rio Grande Western narrow gauge. To this day, they still run the original 100 year old 3 foot narrow gauge locomotives for nearly all of their daily trains. It's an amazing experience and it's documented in this all-new film about the r...
Making of Durango and Silverton 476 Films
Переглядів 635Рік тому
Here is a little Behind the Scenes look at the making of TWO new short films, entirely shot on 16mm, all about the Denver and Rio Grande Western branch between Durango and Silverton Colorado. We're very excited to bring these new films to you guys and hope you enjoy them! Stay tuned for launch dates coming soon!
ORWO NC500 E6 Reversal Processing Test
Переглядів 1,8 тис.Рік тому
This video shows what it's like to process the ORWO NC500 as modern E6, done at Spectra in North Hollywood California. It shows ORWO being over exposed for the sake of understanding how well it works. We also show full-screen charts, something we did not have time to shoot last week. We have to do a lot more exploring with the NC500, including perhaps tuning our scanner and post workflow more. ...
ORWO ISO RANGE
Переглядів 1,1 тис.Рік тому
This video is a companion to the ORWO vs Kodak video. It shows ORWO being over exposed for the sake of understanding how well it works. We also show full-screen charts, something we did not have time to shoot last week. We have to do a lot more exploring with the NC500, including perhaps tuning our scanner and post workflow more. Until then however, we are churning out video after video to get ...
ORWO NC500 VS Kodak 7219 500T
Переглядів 7 тис.Рік тому
This video is our first comparison between ORWO NC500 and Kodak 7219. We received the film and made this video in 48hrs. So it's rushed, it's not perfect in any way, but it gives a good comparison between the two stocks. We have to do a lot more exploring with the NC500, including perhaps tuning our scanner and post workflow more. Until then however, this is a good look at some of the good thin...
ORWO NC500 Initial Test
Переглядів 2 тис.Рік тому
This video shows a few scenes shot with the brand new ORWO NC500 film stock. We received the film and made this video in 48hrs. So it's rushed, it's not perfect in any way, but it shows what the stock can look like when graded. We will be doing more tests AND a full comparison between NC500 and Kodak Vision 3 7219 very soon.
Analog Year in Review 2022 (super 8 and 16mm)
Переглядів 661Рік тому
Some outtakes from our shooting in 2022! Enjoy! Shot entirely on Super 8 and 16mm. Beaulieu 6008 Beaulieu 2016 Aaton XTR Prod Music by Oscar Peterson "Wondering" - Our theme song for 2022! Scanned by us! www.narrowgaugefilms.com
Aaton Magazine Cover Boots
Переглядів 338Рік тому
Dragon Cine™ is finally offering new products. Our first product is for ALL of the Aaton 16mm LTR/XTR/Xtera magazines. The concept is pretty simple, a more rigid boot with rubber gaskets, prevents the boot from falling off and protects the throat much better. They are currently for sale on ebay: www.ebay.com/itm/115648415834
Super 8 Summer Sunset (Beaulieu 6008 Kodak 50D)
Переглядів 4,3 тис.2 роки тому
This is just a section of a new film we are shooting all about live in Los Angeles. I wanted to post this because we're getting excellent results with the Vision 3 50D stock and our (new to us) Beaulieu 6008 Super 8 camera. Where stability truly sucks, we're thinking it maybe the cartridges and NOT the camera.
DeVry 35mm Film Projector -The Workbench- E23
Переглядів 2,2 тис.2 роки тому
In this episode we go through our DeVry 35mm projector and what it's like to project a direct off negative print. The Workbench is an all new series all about working on motion picture film, from the pre-production through post, all the way through the delivery process. For more information about what we do, please visit www.celluloiddreaming.com and also our technical social media on instagram...
Aaton/Arri 16mm Lightweight Build -The Workbench- E22
Переглядів 1,8 тис.2 роки тому
In this episode we discuss building your lightweight 16mm camera package. The Workbench is an all new series all about working on motion picture film, from the pre-production through post, all the way through the delivery process. For more information about what we do, please visit www.celluloiddreaming.com and also our technical social media on instagram @tye1138. Thanks for reading and I hope...
Buying your first camera -The Workbench- E21
Переглядів 1,2 тис.2 роки тому
In this episode we discuss how to buy your first camera. What formats to choose for your budget and what to look out for. The Workbench is an all new series all about working on motion picture film, from the pre-production through post, all the way through the delivery process. For more information about what we do, please visit www.celluloiddreaming.com and also our technical social media on i...
Arriflex 535B History and Loading -The Workbench- E20
Переглядів 4,6 тис.2 роки тому
Arriflex 535B History and Loading -The Workbench- E20
Tye's Super 8 History -The Workbench- E19
Переглядів 4812 роки тому
Tye's Super 8 History -The Workbench- E19
Sync Sound test Super 8 vs 16mm -The Workbench- E18
Переглядів 4,2 тис.2 роки тому
Sync Sound test Super 8 vs 16mm -The Workbench- E18
Ektachrome 100D S8 vs 16mm test -The Workbench- E17
Переглядів 2,4 тис.2 роки тому
Ektachrome 100D S8 vs 16mm test -The Workbench- E17
The GIANTS in the Hills - Durango Silverton Cumbres Toltec Narrow gauge railroading 16mm film
Переглядів 2,4 тис.2 роки тому
The GIANTS in the Hills - Durango Silverton Cumbres Toltec Narrow gauge railroading 16mm film
Darker Skin Camera Test (Aaton S16mm 7203 50D)
Переглядів 4,1 тис.2 роки тому
Darker Skin Camera Test (Aaton S16mm 7203 50D)
Breaking Down your Script - The Workbench - Episode 16
Переглядів 4342 роки тому
Breaking Down your Script - The Workbench - Episode 16
Low Cost Film Scanning Services 8mm, Super 8mm, 16mm, Super 16mm, negative, print, damaged, warped.
Переглядів 1,2 тис.2 роки тому
Low Cost Film Scanning Services 8mm, Super 8mm, 16mm, Super 16mm, negative, print, damaged, warped.
AATON XTR Prod 16mm vs 35III 35mm camera - The Workbench - Episode 14
Переглядів 2,3 тис.2 роки тому
AATON XTR Prod 16mm vs 35III 35mm camera - The Workbench - Episode 14
16mm vs 35mm - The Workbench - Episode 15
Переглядів 8 тис.2 роки тому
16mm vs 35mm - The Workbench - Episode 15
Wolverine vs Film Fabriek 8mm
Переглядів 5862 роки тому
Wolverine vs Film Fabriek 8mm
Super 8 sound is alive! - The Workbench- Episode 13
Переглядів 7723 роки тому
Super 8 sound is alive! - The Workbench- Episode 13
Super 8 vs 16mm - The Workbench- Episode 12
Переглядів 6 тис.3 роки тому
Super 8 vs 16mm - The Workbench- Episode 12
Film Camera Video Taps - The Workbench- Episode 11
Переглядів 3 тис.3 роки тому
Film Camera Video Taps - The Workbench- Episode 11
8mm vs Super 8mm - The Workbench- Episode 10
Переглядів 1,8 тис.3 роки тому
8mm vs Super 8mm - The Workbench- Episode 10

КОМЕНТАРІ

  • @Statuskuo75
    @Statuskuo75 День тому

    Film should not drag on the floor

  • @4maccie
    @4maccie 27 днів тому

    waiting for the ARRICAM video, cheers

    • @CinemaRepository
      @CinemaRepository 27 днів тому

      @@4maccie Yea sorry, been super busy. I’ll work on it next.

    • @4maccie
      @4maccie 11 днів тому

      So glad you replied. Another super interesting one you should do, is a proper video about film camera prep (steadiness, charts, frame.leader exc). Thanks you re the man. Best from Italy

  • @howiespancakeshack
    @howiespancakeshack Місяць тому

    Where is the film?

    • @CinemaRepository
      @CinemaRepository Місяць тому

      Here ya go! We will have it posted once we have the package ready. vimeo.com/658164874

  • @PaulChiesa-db5zn
    @PaulChiesa-db5zn Місяць тому

    Epic movie.

  • @RealTuckered
    @RealTuckered 2 місяці тому

    So cool to see this older formats in use.

  • @Lenox-bp3lu
    @Lenox-bp3lu 2 місяці тому

    Would you rate the NC400 as a 200asa stovk for the best c colour rendition and dynamic range?

    • @CinemaRepository
      @CinemaRepository 2 місяці тому

      @@Lenox-bp3lu I rated this test at 200, I think it works well.

  • @JoeDeNardo
    @JoeDeNardo 2 місяці тому

    Any idea how loud an Aaton 35 II is?

    • @CinemaRepository
      @CinemaRepository 2 місяці тому

      34db when tuned, it's 2db louder than a 35III

  • @BlenderRenderChickenTender
    @BlenderRenderChickenTender 3 місяці тому

    WHERE DID YOU GET THIS, HOW DO I GET AHOLD OF A FLATBED EDITOR

  • @cgbreeki849
    @cgbreeki849 3 місяці тому

    Let us all be very thankful for Christopher Nolan's use of IMAX on Oppenheimer! And also thanks for this video man, and for the whole series. I wish I had discovered all of this a long while ago!

  • @PeterConnell90
    @PeterConnell90 3 місяці тому

    I've been flirting with the idea of 35mm recently. Fundamentally its prohibitively expensive for me at the moment. Also I find the 16mm just looks more filmic and is more reminiscent of some of my favourite 80s and 90s films. I think for independent makers the 16mm setup is a lot more manageable on set. Honestly I'm so grateful the 16mm format exists and is at least somewhat accessible for independent film makers. I love it !

    • @CinemaRepository
      @CinemaRepository 3 місяці тому

      @@PeterConnell90 Yea, I have been working on a bunch of personal 35mm projects and ya know, I kinda gave up and sold all my 35mm gear in 2022. Value of all of it was high and I got out. 16mm is easier to deal with and has a more filmic look. 35mm almost looks digital with a good scan and presentation. It’s almost like you’re spending money on something that is indistinguishable from digital so why bother? Only one of those projects is worth watching or available at this time, if you wanna check it out; vimeo.com/658164874

    • @PeterConnell90
      @PeterConnell90 3 місяці тому

      @@CinemaRepository yeh i know what you mean. I have found that with 70mm too, can almost look digital. There is a sweet spot. I guess 35mm scans back in the day weren't as good so almost looks like 16mm, I'm thinking of cape fear for example or similar. Though the close ups of cilian murphy on 70mm oppenheimer were still incredibly filmic. I wouldn't say no to the opportunity. I'll check out that vimeo link thanks

  • @PeterConnell90
    @PeterConnell90 3 місяці тому

    oof the steam around that train at 3:38, thats just made for film

    • @CinemaRepository
      @CinemaRepository 3 місяці тому

      @@PeterConnell90 Yea it was such a fun shoot moving engines around all night and placing lights, woooo yaaaaa!

  • @PeterConnell90
    @PeterConnell90 3 місяці тому

    gorgeous footage, what a luxury to see

    • @CinemaRepository
      @CinemaRepository 3 місяці тому

      @@PeterConnell90 Thanks so much. Lots of hard work and patience, did lead to a nice product. Our 2nd film is complete as well, just waiting for final VO. We have 5 more in various states of pre production, production and post production. All shot on 16mm. So stick around, lots more coming in the next year or so.

    • @PeterConnell90
      @PeterConnell90 3 місяці тому

      @@CinemaRepository I've subscribed and am looking forward to seeing them. Going to watch some more of your stuff now, its excellent

  • @philpritchard5173
    @philpritchard5173 3 місяці тому

    Grt

  • @philpritchard5173
    @philpritchard5173 3 місяці тому

    Grt. Tx

  • @wet_sand
    @wet_sand 3 місяці тому

    What lens u used on this camera, looks so amazing just like 16mm

  • @jzagaja
    @jzagaja 4 місяці тому

    Why HDR when negatives are 2.5D/0.3 = 8 stops not 15. Velvia is 4.2D/0.3 = 14 stops.

    • @CinemaRepository
      @CinemaRepository 4 місяці тому

      @@jzagaja Velvia is like 4 stops. We shoot it a lot, very narrow DR.

    • @jzagaja
      @jzagaja 4 місяці тому

      what you refer is exposure latitude. I'm talking about dynamic range of film - density range. To read shadows of Velvia you need 15 stops scanner. Drum scanners could deliver very organic scans. Velvia compress everything into shadows. It's good for darkroom projection or HDR.

    • @CinemaRepository
      @CinemaRepository 4 місяці тому

      @@jzagaja I will have to try multi exposure capture.

    • @jzagaja
      @jzagaja 4 місяці тому

      I had macro capture of Kodak Vision through Redcam. It has good color response. You just needed to apply log curve, invert and set white points. Colors were great without corrections. You can do scanner yourself using digicam and good lens. It's all about soft to properly register frames.

    • @jzagaja
      @jzagaja 4 місяці тому

      To me an ideal cine scanner would be line DMD panel and PMT sensor with 16 bit ADC. Not to slow and not the fastest. In drum scanner it was scanning every point and you could set resolution by varying aperture and drum speed that's why nice look but there was encoder register error. CMOS scanners must oversample to not mix film grain with Bayer sensor or aliasing.

  • @v-g-z3689
    @v-g-z3689 4 місяці тому

    Awesome, that means I will develope my 135 rolls in E6!

    • @CinemaRepository
      @CinemaRepository 4 місяці тому

      @@v-g-z3689 It’ll come out weird but you can fix it in the scan.

    • @v-g-z3689
      @v-g-z3689 4 місяці тому

      @@CinemaRepository Erm... sorry, but fortunately, I'm not one of these analogue and digital mixing scanners, I use slide film for the exact purpose of not having to deal with all that stuff. The question is, how clear is the base, and do they use the same for 135 still and 16mm motion picture? Maked color negative film of course is not very usable for slide developement. Unmasked film is much more likely to work, I don´t mind a warm tone at all, but it really depends, I´ll have to give it a try. The projected film looks good here in the video but of course I´m quite a fiew meters away from the source. In case someone didn´t get it: I don´t scan film, and especially slide film. By the way, I don´t scan film... .D

    • @CinemaRepository
      @CinemaRepository 4 місяці тому

      @@v-g-z3689 Hmm, you may need to test what filters you’ll need to help remove the orange layer. I’d probably think an 81A would be fine for outdoor 5600k, you’d be fine. We didn’t test it further because it still looked like crap.

    • @v-g-z3689
      @v-g-z3689 4 місяці тому

      @@CinemaRepository That´s what I was thinking. The 81A might just be it, I have to give it a try, I don´t mind if the colours aren't quite right, and I love the grainyness of the material. Having 24 DIN sensitivity is also a good perspective as there is no higher speed slide film avaliable, just 18 and 21 DIN. And 9,50€ per roll I´m not complaining ;)

  • @lookboom3913
    @lookboom3913 4 місяці тому

    Skin tone is better than NC500. Perforation still imperfect. Grain is huge compare Kodak Vision or even Ektachrome. They should improve it or make it twice cheaper than Kodak, maybe it is not possible for small factory. But they trying to restart motion picture production and community respect and support them for that, cause it better than nothing.

    • @CinemaRepository
      @CinemaRepository 4 місяці тому

      I wish the emulsion was consistent. It's very bad, pulsing non stop.

    • @koekje00005
      @koekje00005 3 дні тому

      @@CinemaRepository Are you able to compensate for that in color correction or no?

    • @CinemaRepository
      @CinemaRepository 3 дні тому

      @@koekje00005 Well you saw the video, that's about the best I can do. It's very wonky. I have been wanting to do another test on NC500, but seeing as our stock is now over 2 years old, IDK if it's worth it.

  • @michaelpetersenfilm
    @michaelpetersenfilm 4 місяці тому

    So what do you expect from it as a reversal? Will it behave similar to your already tested NC500 in need of even more blue filtering because of that even stronger orange layer?

    • @CinemaRepository
      @CinemaRepository 2 місяці тому

      @@michaelpetersenfilm I think it would come out the same a as the NC500

  • @rothellecooke7425
    @rothellecooke7425 4 місяці тому

    Thanks for the hard work you put into this. I'm going to stick with the Kodak family for my Bolex Rex and Cine-Kodak Model K cameras. 🤭🤭🤭

  • @BROKENBUTSTRONG
    @BROKENBUTSTRONG 4 місяці тому

    Ren'em spoons!

  • @Art-is-craft
    @Art-is-craft 5 місяців тому

    I would just be happy with single projection cinerama today in 70mm.

  • @danieltancinematographer
    @danieltancinematographer 5 місяців тому

    Grear to see you on set. So cool, calm & collected. The shots looked really nice.

  • @victorcasillas8057
    @victorcasillas8057 5 місяців тому

    What scanner?

    • @CinemaRepository
      @CinemaRepository 5 місяців тому

      We use a Film Fabric HDS + for scanning. Check out our instagram @tye1138 and you'll see more about what we do. Thanks for asking

  • @victorcasillas8057
    @victorcasillas8057 5 місяців тому

    Nice Elmo.

  • @manuelgomez9730
    @manuelgomez9730 5 місяців тому

    Hello! would you be interested in selling the camera?

  • @niklaskremerfilm
    @niklaskremerfilm 5 місяців тому

    where you have developed the film?:)

  • @staswlad
    @staswlad 5 місяців тому

    Прекрасно!👌

  • @Flor-ian
    @Flor-ian 5 місяців тому

    The close ups at the end were a nice touch. Great shots

  • @truefilm6991
    @truefilm6991 5 місяців тому

    Great shots! Since I am a fan of old trains, I love the shots with the steamers. Looks like narrow gauge. The NC 400 still looks pretty rough on Super 16, especially considering that it's actually more like a 200/250. I trust ORWO will be able to refine it and hopefully bring out 200 and 50 ISO box speed films with finer grain. Colors look nice after your grading, which of course brings out grain. ORWO should pay you, since you are an unbiased, professional tester providing feedback. Thanks for uploading. I look forward to the upcoming test.

  • @didierpidoux2713
    @didierpidoux2713 5 місяців тому

    Very interesting, I think this is the beginning of this emulsion and that the dominant ones will be removed, subsequently

    • @CinemaRepository
      @CinemaRepository 5 місяців тому

      Yea, NC200 will be next. I bet it’s even more fine tuned. They may figure it out eventually, but this is better than NC500 for sure.

  • @loganq
    @loganq 5 місяців тому

    @ 2:20 Oops!

  • @rothellecooke7425
    @rothellecooke7425 6 місяців тому

    Great test, I did the same with my Bolex Rex 16mm and with 4 of my Bolex B8, B8L, D8L and L8 8mm models. I also use Spectra Film and Video for E6 develop only and send out my negatives film to other labs for processing and scanning. Thanks for posting. Hope you fixed that camera...

  • @TinLeadHammer
    @TinLeadHammer 6 місяців тому

    Shooting home movies on Super8 in 1990? I wonder, why. Late 1980s - early 1990s were all about camcorders. SVHS launched in 1987, Hi8 in 1989, and Hi8 looks pretty good, in fact good enough for some professional productions. You would get a 120-minute cassette for about $15, it was re-recordable and watchable on a TV. Hi8 camcorders were expensive though.

    • @CinemaRepository
      @CinemaRepository 6 місяців тому

      It was a transition period and I was poor. The film camera and projector kit we got in 1987 was the only thing I had to shoot with. So when we bought a bunch of cartridges cheap, I just kept shooting until they were gone. At the time we had a junky mono VHS machine and a 19” Trinitron from the late 70s. Some of the Kodachrome stuff I shot is far higher quality than Hi8, which I did use quite a bit in the 90s.

  • @MichaelCarter
    @MichaelCarter 6 місяців тому

    I think Ektachrome Reversal is for me in 16mm

  • @danslink
    @danslink 6 місяців тому

    I remember vividly seeing How the West Was Won at the Denver Cooper Theater in 1963. I was 15 years old at the time and to say I was impressed would be an understatement. What an incredible experience it was, from the assigned seating, the intermission in the lobby with no food or drink in the theater and the overall ambiance of that wondrous Cooper Theater with unbelievable 7 channel sound.....all lost today. I saw several movies in that Denver theater and was able to see the three-strip How the West Was Won twice in 1963. Wonderful memories.

    • @CinemaRepository
      @CinemaRepository 6 місяців тому

      It is a cool experience. Very unique for its day. I wish people cared about the cinema like that today.

  • @theoffbeatdept
    @theoffbeatdept 6 місяців тому

    Quick Question: did you ever do a video on how to replace the super capacitors?? I’m doing a shoot soon with this camera and I need to get these batteries changed 🥵 Or if you have any good resources please let me know🙂 Thanks again for these episodes. SUPER helpful

    • @CinemaRepository
      @CinemaRepository 6 місяців тому

      On the 35III body or on the mags? Feel free to hit me up on instagram @tye1138

  • @theoffbeatdept
    @theoffbeatdept 6 місяців тому

    Thank you so much. Literally so helpful

  • @christopherlandry5223
    @christopherlandry5223 7 місяців тому

    A magnificent motion picture experience

  • @TinLeadHammer
    @TinLeadHammer 7 місяців тому

    So, it stayed sort of in sync for 40 seconds and it started to diverge at about 20 seconds, not something you would use for journalism. I've been reading on the topic lately, and the invention of a sync sound system that allowed to have picture and sound in sync for a whole roll while recording the sound separately, it was a very big deal back in the early 1960s. There is a 1960 film called "Primary", which was shot kind of in sync, but not really, so it took them serious efforts to more or less sync it in post using whatever primitive tech they had. You may want to delve deeper into the issue of sync sound as it is a fascinating topic.

    • @CinemaRepository
      @CinemaRepository 7 місяців тому

      It was for sure not usable, because it doesn’t just get slower, it’s not consistent enough in its speed. So even if you corrected the shot, it would be wrong in multiple places. I’d say you’d get two sentences of dialog before it’s out sadly.

    • @TinLeadHammer
      @TinLeadHammer 7 місяців тому

      @@CinemaRepository To clarify, I meant the Bolex :)

    • @CinemaRepository
      @CinemaRepository 7 місяців тому

      @@TinLeadHammer Yea it falls out too fast.

  • @Modagon
    @Modagon 7 місяців тому

    Hi, I like the 8/16/33 mm look. But is there cheap alternative? Getting the footage developed and digitized is hardly affordable if you want to shoot a full length analog film (and dont want to use pseudo-analog digital filter.)

    • @CinemaRepository
      @CinemaRepository 7 місяців тому

      Not really, gotta raise the money and do it for real sadly.

    • @Modagon
      @Modagon 7 місяців тому

      @@CinemaRepository thanks for the answer

  • @Kitsaplorax
    @Kitsaplorax 7 місяців тому

    I shot Agfachrome 160 as my only color 120 emulsion in the Pacific Northwest in the 1990's because the vegetation was correctly rendered. Kodak and Fuji were garish by comparison. Im going to have to try a 35mm roll of this @ 160 and add different filters to see how well that works. If anyone thinks skin shouldn't have a greenish brown cast in nature, they've never shot portraits in the Hoh rain forest.

  • @ChrisSmartFilms
    @ChrisSmartFilms 7 місяців тому

    incredible restoration work. Im amazed you were able to bring back so much of the original color

  • @TinLeadHammer
    @TinLeadHammer 7 місяців тому

    Check out Fresh Ground Pictures channel, the guy made a scanner out of an old film projector and a digital camera, no fancy computer stuff, just a pin activating shutter on the camera. He then processes in DaVinci Resolve, and the result is impressive if time consuming.

  • @TinLeadHammer
    @TinLeadHammer 7 місяців тому

    Hmm, the emulsion number clearly has "7" as the first digit, not "6" :)

    • @CinemaRepository
      @CinemaRepository 7 місяців тому

      Thank god our audience can see! Clearly I can’t lol 😂

  • @TinLeadHammer
    @TinLeadHammer 7 місяців тому

    Great info! As for Super 8, I don't even want to know what you think about the $4.5K Kodak camera :)

    • @CinemaRepository
      @CinemaRepository 7 місяців тому

      $5500 + tax and limited quantities. We will have one at the end of April to do a full test. I’ve already used it, not impressed. I’ll have to be nice about it in our review tho.

  • @drhkleinert8241
    @drhkleinert8241 7 місяців тому

    Wow, can you imagine...? Three rolls same time and change it chapter by chapter and on what a huge Film it is? Its big and long. Its so great that modern technique can bring and show this without stripes on BluRay, and i am glad that i watched this with my beloved dad , a huge Fan of classic Westerns two times shortly before he died. I have a BIG Flat TV 75 " (or so) and it was real Cinema feeling, it is the only Movie where i had to move my head from side to side to see all the details left and right. A friend of mine isnt in Westerns but THIS Movie is one of his favs.

  • @thousandoaksmall1995
    @thousandoaksmall1995 8 місяців тому

    Loving your whole channel right now!

  • @thousandoaksmall1995
    @thousandoaksmall1995 8 місяців тому

    What an achievement. Excellent job. I have been getting back in to shooting motion picture, and this is the kind of stuff I really admire. Hey, may I ask how the credit "cleanup" is defined? What roles are handled during "cleanup?"

    • @CinemaRepository
      @CinemaRepository 8 місяців тому

      Well, kodak released a batch of bad 7203 50D stock. We had 9 400ft rolls of it, which made the majority of this film. I was livid getting the film home and seeing it full of micro scratches. I talked to my reps who confirmed it was a problem. They graciously gave me new stock but it didn’t solve my problem. So we used Phoenix restoration software to do an automated cleanup pass. If ya look carefully at the pro res 4k 12 bit 444 file on a grading monitor, you can still see the issues. However, it’s way better than it was. All the dark areas were horrible prior to cleanup. Luckily, we haven’t had a lick of issues since. We have 5 more of these films in various forms of production and post to be released in the next two years. So stick around!

  • @thousandoaksmall1995
    @thousandoaksmall1995 8 місяців тому

    Hope you actually put out that K3 video.