- 76
- 312 126
Baitchuckin
United States
Приєднався 17 лип 2022
Chuckin’ Bait 🎣 On UA-cam 📺
NEW BAITS and New Products
Here it is, our very first official bait drop for 8bit Baits. We partnered up with Active Catch to bring you some awesome crank baits in two amazing colors and paint schemes by Garret at Active Catch. Along with the bait drop there are some exciting new products to tell you about that recently launched over on the 8bit website. Mold Mats in both cloth and silicone, as well as Stir Sticks are all now in stock and available.
CHAPTERS:
--------------------
00:00 - Intro
02:45 - Bait Drop Info
08:38 - Cloth Mold Mats
11:33 - Silicone Mold Mats
15:56 - Stir Sticks
20:58 - Outro
PRODUCTS FEATURED IN THIS VIDEO:
--------------------
Bait Drop 1 - Active Catch: 8bitbaits.com/products/bait-drop-1-active-catch?variant=49902580695332
Mold Mats - Cloth: 8bitbaits.com/products/mold-mat-cloth
Mold Mats - Silicone: 8bitbaits.com/products/mold-mat-silicone
Stir Sticks: 8bitbaits.com/products/stir-sticks
SUPPORT THE CHANNEL:
--------------------
Baitchuckin Merch: www.baitchuckin.com
Affiliate Links: bit.ly/m/Baitchuckin
Equipment I Use In My Shop: amzn.to/45aF51G
8BIT BAITS:
--------------------
8bit Web Store: www.8bitbaits.com
Tackle Warehouse: bit.ly/4dBbGTW
Thank You For Watching! Tight Lines!
#bassfishing #baitmaking #crankbait
CHAPTERS:
--------------------
00:00 - Intro
02:45 - Bait Drop Info
08:38 - Cloth Mold Mats
11:33 - Silicone Mold Mats
15:56 - Stir Sticks
20:58 - Outro
PRODUCTS FEATURED IN THIS VIDEO:
--------------------
Bait Drop 1 - Active Catch: 8bitbaits.com/products/bait-drop-1-active-catch?variant=49902580695332
Mold Mats - Cloth: 8bitbaits.com/products/mold-mat-cloth
Mold Mats - Silicone: 8bitbaits.com/products/mold-mat-silicone
Stir Sticks: 8bitbaits.com/products/stir-sticks
SUPPORT THE CHANNEL:
--------------------
Baitchuckin Merch: www.baitchuckin.com
Affiliate Links: bit.ly/m/Baitchuckin
Equipment I Use In My Shop: amzn.to/45aF51G
8BIT BAITS:
--------------------
8bit Web Store: www.8bitbaits.com
Tackle Warehouse: bit.ly/4dBbGTW
Thank You For Watching! Tight Lines!
#bassfishing #baitmaking #crankbait
Переглядів: 1 065
Відео
ZOOM Watermelon Red Pearl Color Match Challenge
Переглядів 2,6 тис.Місяць тому
Recently Chris Jones from @WorldsWorstFishing put out a challenge for all UA-cam Bait Makers to color match ZOOM Watermelon Red Pearl, specifically in the Horny Toad bait profile. I decided to throw my hat in the ring so I picked up a bag of the ZOOM Baits and we went to town on matching that color. Watermelon Red Pearl turned out amazing and I can’t wait to get these fronts onto the water for ...
Original Blue Craw - FULL BREAKDOWN
Переглядів 2,8 тис.Місяць тому
The original MF Manufacturing Blue Craw is one of the most sought after colors in soft plastic bait making. Unfortunately once there was no more Jelly Red, there was no more Blue Craw. In this video we will be pouring the original Blue Craw color and comparing it to a modern day recipe that you can easily make today. CHAPTERS: 00:00 - Intro 03:50 - Glory Craw Mold 04:58 - Color Breakdown 09:02 ...
Impressive New BFS BAIT
Переглядів 3,8 тис.Місяць тому
BFS Fishing is one of the. Hottest trends sweeping through Bass Fishing right now, and the 2.3” Epic SlayBait is a great BFS bait you should be paying attention to. Join us as we make up some Motor Oil Shad SlayBaits and show you a few different ways to rig this bait for some BFS Fishing success CHAPTERS: 00:00 - Intro 01:37 - Shank Bait Care Package 03:40 - Mixing The Back Color 06:35 - Mixing...
ORIGINAL Motor Oil Recipe RELEASED!
Переглядів 7 тис.2 місяці тому
The infamous Original MF Motor Oil Recipe is finally released. The entire magic sauce is fully explained in this video. This recipe comes as a gift to the bait making community from Jeff over at MF Manufacturing. The mold of choice today is the new Epic Bait Molds 4.1” Epic WhipWad which is a collaboration design with Marling Baits. I hope you enjoy this video and share it on your favorite foru...
The Best NEW Shad Bait Imitation!
Переглядів 3 тис.3 місяці тому
The 3.3” Epic SlayBait is quite possibly the best shad bait imitation available. In this video we get to play with the newest size of the SlayBait series of molds, the 3.3” Epic SlayBait. We also show you how to make an amazing fish catching color called Swamp Dragon. Plus, our friend Jacob from N2TW Lures joins us on the delta for an afternoon of fishing. CHAPTERS: 00:00 - Intro 01:15 - Mold O...
EPIC New Version of an Old School Bait!
Переглядів 2,4 тис.4 місяці тому
In this video we finally got our hands on the new 5.7” Accelerator Worm from Epic Bait Molds. This is the Epic Bait Mold rendition of the classic Speed Worm soft plastic bait. A perfect bait for fishing in bodies of water that have a lot of grass and vegetation due to its weedless rigging. I had fun mixing up some new renditions of Red Bug and Watermelon Red, some classic colors for a classic s...
ZMAN Is BIG MAD About This New Bait!
Переглядів 19 тис.4 місяці тому
In this video we are showcasing the loudest vibrating jig on the market, The 1st Gen Fishing Copperhead Bladed Jig. The Copperhead has a unique design with two copper BB’s molded into the head of the jig, causing the vibrating blade to deflect off each BB creating the loudest vibrating jig sound on the market. Come along as I color match a few of the baits and then head out onto the California ...
Making The ORIGINAL Motor Oil Recipe?
Переглядів 4,1 тис.5 місяців тому
In this video we are showcasing the new large cavity count versions of the Epic Bait Molds Finesse Worm Injection Mold. The color for today’s video is my version of Motor Oil that closely matches the original formula which is very sought after. Although the original recipe is a secret formula, the recipe for Mikey’s Motor Oil comes very close to the original. CHAPTERS: 00:00 - World’s Largest W...
Is This Bait Considered Cheating?
Переглядів 33 тис.7 місяців тому
In this video we are matching up the Epic Bait Molds 2.75” Ned Crawler and corresponding tail mold with some custom made micro jigs made by Jacob over at @N2TW_customlures micro jigs are very similar to the Keitech Tungsten Football Jig. We try our hand at a new bait making technique knows as “Milking The Cow” in an attempt to color match the Magic Craw Swirl found in a lot of craw style soft p...
Hypershift Baits For Spring Bass Fishing
Переглядів 7 тис.8 місяців тому
In this video we are doing a full breakdown on the Epic Bait Molds 5.2” Epic Shtickle. This bait Mold is a collaboration between @EpicBaitMolds and @marlingbaits We are making a box with 6 different hypershift colorways using Holoshift Powder from @8bitBaits We feature some of the popular colors like Borealis, Crown Royale and Ghost Trout. If you want to pick up this box of baits or check out t...
HOLOSHIFT POWDER - Complete Overview
Переглядів 2,4 тис.9 місяців тому
HOLOSHIFT POWDER - Complete Overview
It's Not The Size Of Your WhipWad That Matters | 1.7 Inch WhipWad
Переглядів 2 тис.10 місяців тому
It's Not The Size Of Your WhipWad That Matters | 1.7 Inch WhipWad
Color Matching Custom Underspins For Cold Water Bass Fishing
Переглядів 2,2 тис.11 місяців тому
Color Matching Custom Underspins For Cold Water Bass Fishing
Testing NEW Holoshift Powders In The 4.6" Neko Crawler
Переглядів 1,9 тис.11 місяців тому
Testing NEW Holoshift Powders In The 4.6" Neko Crawler
What they DIDN'T TELL YOU About The 7.6" Epic WhipWad
Переглядів 1,9 тис.Рік тому
What they DIDN'T TELL YOU About The 7.6" Epic WhipWad
Marling Baits Has NO IDEA What He Is Doing!
Переглядів 25 тис.Рік тому
Marling Baits Has NO IDEA What He Is Doing!
6th Sense 6 Sack FISHING CHALLENGE - August 2023
Переглядів 617Рік тому
6th Sense 6 Sack FISHING CHALLENGE - August 2023
Epic ShadderBait & SlayBait - New Chatterbait & Swimbait Molds
Переглядів 3,6 тис.Рік тому
Epic ShadderBait & SlayBait - New Chatterbait & Swimbait Molds
M-F Just Released A 30 YEAR OLD COLOR To Make Soft Plastic Baits
Переглядів 3,9 тис.Рік тому
M-F Just Released A 30 YEAR OLD COLOR To Make Soft Plastic Baits
THE BEST Bama Craw Color Recipe - Epic Flappin Drax
Переглядів 4,3 тис.Рік тому
THE BEST Bama Craw Color Recipe - Epic Flappin Drax
HOTTEST New Swimbait! - 3.9" Epic Mullet
Переглядів 5 тис.Рік тому
HOTTEST New Swimbait! - 3.9" Epic Mullet
THE OOZE - Making A Color Changing Soft Plastic Bait
Переглядів 12 тис.Рік тому
THE OOZE - Making A Color Changing Soft Plastic Bait
AMAZING 4 Color Changeable Soft Plastic Bait
Переглядів 4,4 тис.Рік тому
AMAZING 4 Color Changeable Soft Plastic Bait
Color Matching The Mandalorian Darksaber - 12" Mega Grub
Переглядів 5 тис.Рік тому
Color Matching The Mandalorian Darksaber - 12" Mega Grub
Bait Chuckin Say man Love your shows But they too long You need to do this in 2 parts Just a suggestion
Yeah these older videos were a bit long. I've tried to keep things a bit shorter with the newer stuff.
You good now don't get me wrong I dig your show dig
Wow awesome color I have had the mf motor oil color for years and never even used it once but I am definitely using it now Thanks for the video 👍🏻
You are so welcome! Definitely bust out the Motor Oil! It's such a fun color to use! It really looks good in almost any mold.
Just got my cranks and some additional pixie dust colors yesterday. I hate to say that the video doesn’t capture the beauty of those cranks! Absolutely amazing colors and quality! I may need to order another round!!!
I just packed up your second order! I appreciate the support!! ENJOY ;-)
@@baitchuckin did you happen to get my email?
I got you covered!
@@baitchuckin Thank you Sir! Really appreciate it!
I wanna know what camera I use for your vids 😂 baits look nice
Thank You!! I'm actually using an older camera. It's a Canon 80D with a Sigma 18mm Lens.
That's a savage color. Wonder what it would look like black and jelly hypershift.
There's only one way to find out I guess...
It is also called electric chicken😊
Yeah, I found that out after making the video. I didn't know of the color before making the video so my reaction is pretty genuine. Crazy how you can expect one thing but get something totally different.
Do the DOP as a laminate over blue Would look cool.
I bet that would look pretty cool. I'll have to give it a shot!
I know that you showed MF new web address. I keep trying to watch passed videos looking for it. But I start watching them and forget what I'm looking for. If you don't mind sending out again.
No problem. I'll link it here for you, but if you ever need links to any of my partners I have affiliate links in the description of all of my videos. My affiliate links website has links to everyone I work with. Tight Lines! www.m-fmanufacturing.com/
Absolutely loved the video, glad I stumbled into it.
Awesome! I'm glad you stumbled on over too!! Check out the rest of the channel, lots of great content here!!
That colour was amazing! We have a fish thats fairly close to that colour "yellow tail scad or yakka" in australia. They make amazing whole baits but taste good too. That bait wouldn't make it to the bottom 👌👍
Very Cool!! I still need to make it down under. Would love to get some fishing in when I eventually make it down there!
I like the one on the left. What color is that?
The color is called Nightmare Blue from MF. The one on the left was before widening the tip of the colorant jar.. So you were getting the purple color but not much of the blue pigment. The one on the right has equal parts purple dye and blue pigment because the tip was widened so more pigment can pass through it.
You mentioned the delta where are you from.
I’m from the SF Bay Area in California. The Delta is right in my backyard! 🙌🏼
Ok I was thinking Mississippi delta three hours from me. Forgot about Bay delta.
I was stationed at Edward's AFB, and flew out ot Oqkland q few times. Beautiful country wide in Northern California not so much in Southern California.
Yeah man....cool airbrushing work! And the new mats are awesome...I got one of each here and they work well while looking cool!!!
Awesome!! Thank you for the support!!!
I have the lure works green chartreuse dye, but not mf ..do u think that would work for the ooze I stead of the mf green chartreuse?
Unfortunately no it won’t work. I’ve tried it myself and it turned army green. 🤷🏻♂️
I am sad to report that the mf violet grape no longer changes to the pink. It is now just a generic grape color. I guess the formula changed
Weird, he had just stocked up on a bunch of it about 6 months back. I’ll try and check with Jeff. Did you use the recipe in the video? I know if you add too much it goes straight purple. You gotta stay around 20 drops per cup to keep the pink shift in there.
I tried exactly 15 drops and exactly 20 drops and both just ended up a grape purple
Well that’s a bummer. Was the bottle shaken up good? You should reach out to MF and see about getting it replaced or a refund. 🤷🏻♂️
Yep I actually set two metal mixing balls in it and use a bottle mixer similar to what they use in labs to shake blood and stuff together. Works wonders on these bottles of colorant.
I believe middle smoke with purple would show better. I know each person sees it different.
That’s the best part of making your own baits! You can adjust it to whatever color you like best!! 🙌🏼
Little red with olive oil could become new motee oil.
Ohh I’ll give that a try, that could look really good!!
On 1.2 inch what size hook does it use?
It’s one of the small ones. The VMC Moon eye jigs are what Epic recommends, I don’t fish the 1.2 myself but it’s going to require a panfish hook. 🪝 it’s a tiny bait!
IS MF opened again?
They are open in a limited capacity as far as I know. It’s been a little bit since I’ve heard from them. 🤷🏻♂️
Will they ever get these colorants back in stock? I’ve been looking every week for months. 😂
Not sure, I think MF is actually winding down their business. 🤷🏻♂️
Hello, Mr. Baitchuckin. Do you have any videos where you test different formulas to get the best wiggle action out of a wacky rigged stick bait? Or can you give me any tips on how to get the most action out of my homemade stick worms? I have tried 4 different brands of soft formula plastisol with salt and can't get the wiggle that GYB has.
Hi there! No I don't have a video like that posted but that's exactly the type of content I plan on bringing to the channel. To be honest I've gotten a little bored doing color recipe's and mold reviews all the time. I want to start adding content like this into the channel more. It's a great idea for a video and I may use it for a video in the future!
Who does your bags those look awesome.
Thank You! I worked with a graphic designer, he is the same one that has done all of my graphics and then sent them off to print at a bag manufacturer. I like to control the art myself instead of have a factory do it. My suggestion is to reach out to a supplier that you like for costs, etc. and ask them for an art template. Then you can take that template and either do the graphics yourself or work with an artist on Fiverr or another similar platform to get some cool art done. Then go back to the manufacturer with the completed art file and get the bags printed. It's a little more leg work, but the bags turn out so much better that way in my opinion.
@@baitchuckin thank you for all the help I will do that keep the videos coming really love all the content learning a lot from you and your videos.
What size jig heads are best for this bait thanks
Jason from Epic Bait Molds recommends the VMC Moon Eye Jigs. Size of jig will depend on the size of the crappie slayer you are using. 🙌🏼
@@baitchuckin I just ordered the 3 in and was wondering what you recommend for that thanks
I suggest the 1/16 or 1/32. You can go up to an 1/8 but you need to find it on the smaller hook size.
Definitely some really awesome new products! I am loving those new mats in my shop! I was also in the butterknife gang but after using the new stir sticks I finally see what I was missing out on! Keep up the great work my friend!
That is awesome to hear! Yeah the flat stir sticks really do make a big difference. It is just a nicer experience overall in my opinion.
Hello. Loving your content. I was wondering what the extra tails are for. It would be great to have some extra tails for a lot of baits as the tails are constantly being bit off leaving the rest of the bait virtually useless. I can’t halo to wonder how a replacement tail would be attached. Good luck with your channel and GOD BLESS!
Hi there! The tails are to be used to place in the mold and then inject the body of the bait over the tail. This allows you to have a different color tail then the rest of the body. Unfortunately out in the wild, when a fish bites off the tail, there is no way to re-attach it. Things like "Mend-It" can help with things like tearing on a larger swimbait, but for the most part, if they bite off the tail, that bait is done.
Some great new tools for the baitmaking community and those cranks are 🔥🔥 👏👏 all around!
Yes they are! Garrett did a great job on them!
Are your flakes uv ?
What do you mean by UV? Can you be a bit more specific?
@@baitchuckin a lot of fluorescent colors liked chartreuse reflect uv light. Basically if you shined a black light on them they glow the color that they are. Bass can see uv.
@@baitchuckin you have dead on colors. Do you have any of the Neo colors? Shine a black light on the bottle tips. You will see what I mean
Ahh ok yes now I understand what you mean, UV Reactive. To be honest I don't know if any of them are UV reactive or not. I'll have to bust out the black light and check.
@@baitchuckin if or when you do let me know and if they are let me know which ones. Please. Mf doesn’t make anymore
Yes sir I wear a apron my self because I have spell plastic on myself before bump the cup picking it up and it spelled out on my chest if I didn't have it on I would have been burned tell bad and i saw you using those cake spatulas tell my wife I got to have some of those enjoy the content thanks again triple j baits and i may get one of those matts it's pretty cool to
Glad to hear you had the apron on, that could have been really bad otherwise!!!! Thank you for the support!!
Just got my order in for some cranks!! Can’t wait to get my hands on them!!
Thank You for the support brother!!
22 min infomercial.
Well I did say up front this wasn't a normal bait making video, and I do need to announce the new products in some way.
So what he runs a business.
@@darrellgrant7615 Yup, and a youtube channel where he makes baits. I just expected for baits to be made, he can advertise then make baits. Plenty of other youtube bait makers do it all the time.
@@darrellgrant7615 And you know he has a channel for his business, right? @8bitBaits
Wow you’re seriously crying about ONE video where he’s not making baits, because god forbid, he’s trying to make a living to support himself and his family ? How ungrateful and selfish of you. You should be THANKING him for making ANY videos that help YOU for FREE. Classless.
Love the Shad pattern!
Yeah he did a great job on the paint!!!
Some real nice drops. Will be making an order for some of your items soon. Just found your channel and enjoying all the videos so far
Awesome! Welcome to the channel!!! Make sure to check out the playlists!!
The mats are awesome!! The stir sticks are my favorite stirring utensil. I will have to get some crank baits
Yeah, once you start using them, it's hard to go back...
Hey do you sell your baits that you make ???
Yes I just did a bait drop on the website. I will start to do soft plastic bait drops here shortly as well!
Nice looking cranks.
Thank You!!! I think they should do really well!!!
🤪
🔥 🔥🔥
Cheers and tight lines brother!!
#NotificationGang I am so stoked for the live streams coming back. Also, for anyone who wants support 8 Bit Baits. Those silicone mats have 1000 uses, not just bait making. Cooking, reel and other small mechanic servicing, electronics repair, and all sorts of other stuff.
do you sell your baits as i would love to get my hands on some
Nicely done as usual
Dude!!!!!! Nice!!!!!!! Job!!!!!! Wow. Gorgeous matches w the color.
Glad you like it!! I appreciate the support!!
Great video! Thanks for sharing. Any chance you can get his Olive Oil recipe?
I'll try but Olive Oil is a single color, so I think it's a standalone pigment. I don't believe it's a mixture of anything.
Sorry never I found the website that had the purple so now I finally have all three colors on the way lol
Awesome!! I hope the recipe gets you started on the road to a good Motor Oil!
Well I finally found a spot where you can pause it and see the new color purple numbers I guess that's another one they're not selling anymore do you know if it will work with 3339 r purple
Yes that's correct. The revised version does not have the Firetail Red in it which is why you need to add in a few drops separately if you are trying to re-create the original recipe.
What # is on the purple
The purple is number 9.
Is that blue the 3332
Yes. That is the correct number.
Bait plastic came out with a pretty good Blue crawl
Yeah a few folks have mentioned that. I'll have to check it out.
That's an awesome looking color would you happen to know who makes the mold for that swim bait.
Yes, this is the Epic Bait Molds Whip Wad mold. It comes in a variety of sizes. I have the exact mold linked in the video description for you.
Thank you
But I meant the swimbait not the whip wad I have the whip wad love it great bait epic bait modes make some really good modes.
I have been searching for the original motor oil color for YEARS! Would you sell any of the motor ones?
I don't do custom orders, but I do have Bait Drops on my website from time to time. That would be the best way to grab some.
Looks great! DOP has gotten pretty close. I'd say the MF is just a lighter shade of that brown from the DOP