Відео

So if I buy this, can I open 1440p 60 fps stream on youtube?

I’ve done this once a year ago, in fact I bought 4 of these control boards an what do you know it’s gone again. It’s a shame they don’t make and fit better boards because it’s a pain having to do this.

Thanks Tom... just picked one up yesterday. The biggest concern for me was the battery. Most online reviews for various makes says battery loses its capacity pretty soon... which renders the flosser useless. This applied to even some of the more expensive ones. That's why I considered the option of getting one that connects straight to a tap, no battery needed. But seeing this one at just £19.99 in Lidl seems too good to turn down. So... fingers crossed!

I love this product! Unfortunately I used all the labels that came with the printer and can't find any refills anywhere! Such a shame 😞

It looks bad when you look at the chasis. It is not surface rust. It is rust inside profiles which became visible outside.

A year later, how are your tapos holding out? I've read a few reports of poor reliability, even at lower power levels... Would love to hear your anecdotes after a year of using them.

I plugged the buck converter into the blower fan port on the Hotend Board, or the Hotend daughter board and now my automatic leveling is no longer functioning, any clues on what the issue could be? Everything else including the hotend blower fan port on the breakout board works just fine.

That's really cool. Lidl do some good stuff and im tempted to get one of their razors. How's the battery living up?

Good video Tom - many thanks

I've just used their returns via WhatsApp today. 13:08 sent first text followed less than 30 mins later with my address and product code and digital receipt. At 15:20 an email received to say my replacement shaver will be sent out in the next 2 days. No video or any proof of product failure was required. My purchase was just over 1 year ago so couldn't get a refund in shop. So just over 2 hours and nfa required by me. So Great job Lidl and service partner (Hoyer Handel in my case). Might be worth saying it's the first time I've ever had to make a warranty claim ever as i usually just bin defective goods on the rare occasions it happens from various vendors. Never had a problem with middle of Lidl products before this

Thanks Tom. This was well explained and demonstrated. Our company uses the same hikvision cameras to monitor machines we install in automated shipping terminals. I will try these techniques and hopefully they will work. I’m a mechanical engineer, not IT or electrical, so I will pass on full credit to Tom’s mans shed if we are successful! Regards, Aaron.

Got mine up and running today with much help from these videos. Thanks :) One issue I’m having is that the movement of the filament guide is not centred on my receiver spool so the filament sort of piles up on one side (which I’m worried might cause jams when printing). Any tips on how to realign? I’ll try to add a video tomorrow to show what I mean more clearly. Cheers!

Do you know how powerful this is in terms of steam? I did not find info about with how much bar this functions. Does this compete with Karcher?

Happy new year to you. I noticed in the background you have a large Blakes 7 Liberator. Could you show this in a video and let us know where you got it from please?

Great liberator model in the background. Subscribed on that alone.

good for pole cleaning your windows , just the video i was looking for thanks .

Hi, sorry about the late hour I have a MG4 like yours, I just watched your video regarding the connection of the Dash Cam. I would like to ask you, if I don't use the 2Pin fuse adapter for the foreseeable future, can I still connect everything like you did? although I imagine it's not a job done properly... I'm telling you this because in the space of a week my car was all over the passenger side... so I decided to install the Dash. Could you tell me how I get power for sentry mode? Thank you in advance for all your understanding

Hi, did this need RCD protection? I only have a spare on the non RCD side of the board. Can that be used with a 32a mcb?

Thinking of doing the same. Have octopus agile and we have a system boiler that feeds a mega flow tank. Original installer didn’t wire up the immersion element on the tank. So considering a smart fused spur from the consumer unit to the immersion and use cheaper periods to heat the water. Going to use home assistant which can automate it all when octopus agile is below a certain amount to switch on the immersion element to save heating water via the gas boiler. Seem like a good idea? Thanks Tom.

Very informative andwered a lot of questions

I have spent over £110 on individual models of rotary and foil type shavers in the past (Phillips and Braun) and they just wouldn't cut my facial hair properly! I ended up giving them away to family members. Yesterday as a present my Mum gave me a slightly different Silvercrest model for Christmas, and I thought it was nice but it wouldn't work. I tried it out anyway, and was shocked! It gave me a clean shave in literally under 2 minutes. I have no idea why the expensive, "better" models would not give me a clean shave, leaving patches that would not trim etc, while this model which is a lot cheaper works flawlessly. I won't have to wet shave now and will save a lot of time getting ready! Definitely impressed with it.

Thank you for this Tom! Keep it up.

I think your description of Bresser as being on the lower rungs of the ladder a little unfair. I have a pair of 12 year old Bresser binoculars (from Iidl) and they are excellent.

I bought one of these a few weeks ago. When i opened the box, a little Chinaman jumped out and hid in the wardrobe, haven't seen him since, i hope he's ok. Has this happened to anybody else ?

Season's Greetings to you Tom and wishing you health and happiness in 2025😊.

You just got another subscriber!

Cheers Tom. Very informative. Im thinking of getting one shortly. 4 years old with 30,000 miles on it so itll be interesting to see how it has held up underneath. If I can manage to get under it!

I have been wondering about many of your video's relate to Lido products. Thus not all of your links are available in the US. Any suggestions? Merry Christmas.

Merry Christmas Tom, Happy New Year and here's to all the future interesting videos.

Merry Christmas and Happy New Year Tom. Thanks for all the videos in 2024

Merry Christmas to you Tom. I hope you have a lovely time. Looking forward to some MG4 videos! ❤ 🎄

These budget microscopes really need light to produce good video/pictures

I have a bresser astronomical camera. For the money its quite good!!!

Merry Christmas Tom and have a happy New Year. If you get a chance I might recommend you doing a shorts video summarising how you printed those middle finger gift boxes, I can imagine those being quite popular. Would be great to hear more thoughts from you and your family on good boardgames too. No pressure of course. Cheers for providing all the great content and being an all round top bloke.

Merry Christmas Tom, thanks for all your great informative videos

Have a lovely Christmas Tom and thanks for all the interesting videos in 2024

MERRY CHRISTMAS Tom and thanks for all your content 👍👍👍

Hi Tom...I also have the old version of the Silvercrest Rotary and mine is still going strong after 3 years, albeit the battery doesn't last quite as long. I did see the new model you have purchased there and was tempted with the extra features. However I went for the Sivercrest FOIL version they also have in stock right now and was VERY impressed. The motor sounds and feels MUCH more powerful than the rotary equivalent....and the shave is a lot closer. I have zero complaints about the older Silvercrest Rotary but the new FOIL version is far superior I think. I still might buy that new Rotary one to have as a backup as it also looks great in your video but I would highly recommend the foil one for the extra fiver (locally 25 euro here in Dublin, probably 20 Stg where you are). Well done on another excellent, detailed video and have a very great Christmas and a very smooth new year!

Great video cheers for that. 👍👍

SO it's best to start from the front, and fit the cable from there towards the back at which point the slack is 'hidden' in the boot door? Also appreciate the commitment, when you dubbed over the muted A-pillar removal part, you did include some humph noises to illustrate the effort to pull it off 😆

Great Video 😅, thanks for Sharing. I love Distilled Water.

Got a similar product by the same company. Very useful for somebody like me who hasn't used a torque wrench before.

Are sure its Bresser ?, im saying that because bresser makes fine telescopes and they most deff know the difference between zoom and focus mate, it sounds very Chinesey to me and maybe a rip off of the name.

Thorough review of the process Tom and very detailed , thx for sharing this. I think the service department has a contract with ups , to deliver all these returns at a bottom price , therefore its probably a lower priority for ups. I get your frustration when instructions arent read or followed. I Also think a lot of ppl wouldnt even bother starting the rma process because of all the hassle , and making video and sending out , for less tech savvy persons not an easy task

Hi Tom, an organised friend of mine has an A-Z accordian-style expanding folder, in which he keeps all his user manuals (alphabetically by name) and staples the receipt to the booklet. Quite a good hack!

Great review - Merry x-mas 🎄

Many of these work fine on Android phones/tablets too, just need a USB OTG adapter and, depending on the phone, a camera app that supports USB webcams.

Thanks Tom, a fair bit of kit for the money. I think those options are grayed out because either the camera hardware does not provide the means to adjust them or else a specific driver is needed and Windows just loaded a generic one.

Great review. Very interesting. Happy Christmas Tom🎉

Another very thorough review Tom 👍