Відео

@@Maaaaaax-07 good to know! I appreciate it! My buddy gave me them for free and i tossed them on. Thanks !

@@crtmotorsports7423 They look better tho 😂

I appreciate it! Lmk it you need help

Yessir!

Stock

Armour bodies wayyy betterrr imo

@@crtmotorsports7423 that’s what I’ve heard but I was sent these hot bodies as a gift. Turns out I did need part of the oem front cowl to run the hot bodies front end. It’s part number 55028-0699. I mistakenly threw mine away along with the rest of the oem body panels I destroyed lol.

I paid $60 for the im not an idiot i knew they were fake…

My buddy sold a while back unfortunately

@@crtmotorsports7423 ahh ok. What did he pickup as replacement?

Yessir 10 front and 12 rear but dont put 245s up front I recommend 235s

@@crtmotorsports7423 bless🙏🏾 Thxs for info

Anytime yes i used e9x brakelines

My buddy gave it to me supposedly was oem m performance i sadly destroyed it when i hit uneven railroad track

Trust me lesson learned and glad i can make custom lines at work

N54s are mafless

Yes installed motor and had everything ready to go only thing i couldn’t was buy yuppee radiator hose but in past i have installed a motor and fired it up in 8- 10 hours

@@crtmotorsports7423 Im impressed with that, mostly you see people do it in 1.5 - 2 days, I'm in Ghana-Africa, just bought an e93 335is and your video is helping with research on going single turbo. Thanks!

@@timsintim3346 yeah since i dropped motor in with trans turbo dp everything i just had to connect harness drive shaft put fromt clip and fluids

@@timsintim3346 also car is manual its a bit easiers but pulling this motor and throwing it in an e90 with dct and m3 shifter with gts flash! I always wanted a 335is but really expensive

@@crtmotorsports7423 makes a lot of sense to do it this way, plus you have room/space and not crunch in the engine bay.

Thank you!

The side wall says R17 and theyre the concave Apex Arc 8s so - 17x9 ET30, looks like hes running a spacer too

Stock oneeee crazy enough!

Impact on and then had a pin mad to lock fly wheel while i torque it

I think you’re good brother i have in the rear 17/9.5 et35 with a 275/40/17 before i put 12mm spacers and rolled fenders

Check my ig _adrian_n54 and look at the car to see if you like fitnent

Eibach pro kit lower springs ! Oem struts newly replaced

Did it rub in the front or rear with it being lowered

@@luispina317 just a hair in front with the 255/40/17 you can run a 245/40/17 i track the car and no issues just certain drive ways that rub a hair. And the rear is good i rolled my rears and put 12mm spacer on the 9.5 et35 and rubs a hair

@@luispina317 rear 275/40/17

Thanks. Putting mine on tomorrow. I have the same wheels as you. Guessing it didn’t rub in the back before the spacers huh

I did m3 factory spec

@@crtmotorsports7423 thank you so much for your response man! Keep the videos coming!

@@stgmatuning thank you! Will doo!

Yessir i have an 07e92

Thank you!

I spoke way too soon

Yes you are correct lol. The flange speedtech has sent me for the drain was wrong and I thought the same thing. Had to order on Amazon a different drain and clock turbo

@@crtmotorsports7423 Hey Adrian - just a heads up - we did make the drain for a GTXgen2, and we checked the fit on a 3582r, so it does work, but I see you had it installed backwards, at least in the early part of the video. The Garretts are really compact axially though, so the CHRA vs Comp Housing vs Turbine housing only has about a 5 degree rotation range in which it will all fit though, so it can probably look like it won't work in some situations depending on where everything is positioned. It sounds like you got it worked out, but if you ever go back in there for some reason, take a look at our page here for how the drain needs to route: speedtech.com/pages/bmw-n54-top-mount-turbo-kit But as always, definitely email us if you run into issues, we're always willing to help!

@@speedtech2198 Yessirr! Thank you guys that was my problem exactly had it clocked wrong! Great kit over super happy with it! I ended getting a flange on line and a 1/2 npt to -10an 45° to make it work and not be as tight! Thank you guys for the help! Great quality products!

Thank you brother! Been daily driving for over 2 months did 1 pull and 02a took a crap git nw ones but haven’t got around to installing them

@@crtmotorsports7423 Bet!

Anthracite! Thanks

First time took 2 full days on the floor now on the floor takes about 4 hours 🤣🤣🤣

Amr complex go kart track infront of homestead miami speedway

Yessir!! You want the link to the turbo?

@@crtmotorsports7423 Yes

@@koko2loko1 www.ebay.com/itm/303391061974?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=WwU27oIQSSO&sssrc=2349624&ssuid=r8r2kNyCQKK&var=&widget_ver=artemis&media=COPY