Відео

@@rickypickles2219 Is the only difference the picatinny rails at the end of the hand guard? Seems like some companies are going away from that.

@@GearAndGuns ehh kinda. its built like the geissele mk4. so 90 degree edges around mlok. overall beefier and sturdier than the mcmr. it would be like their ris3 version of the mcmr

@@rickypickles2219 I gotcha. That’d would probably add a bit of weight. Did bcm say they were releasing a raider version?

@@rickypickles2219 I Agree. Another amazing product by radian. High quality perfection.

This is how it came stock from benelli. Different models and brands have less or more tube capacity based on what length tube is installed. Also, some tubes have a plug installed in them from the factory which restricts or stops you from loading more rounds. If your tube length is the same, you might have a plug in your tube. Some rounds are also longer then others not allowing you to fit a full 7 depending what round your using.

@@rodsilva80 Loctite or thread lockers I’ve seen/used set in 10 minutes and cure in 24 hours. I would recommend waiting 24 hours, you can wait longer if you want. There’s usually instructions on the back of the package that say what that specific manufacturer recommends.

@@amitaimilshtain I use the vortex torque wrench for torquing things to spec then I use the wheeler space saver screw driver set for everything else. Wheeler has a bunch of different sets.

@@cliffb.396 That’s correct. Needs to be more forward on the lifter towards the tube. Happy to help and good job figuring that out. Yes if you have dummy rounds definitely use those.

@@daveogle3614 Yup, super expensive. Radian sets their prices. They make quality stuff though.

@@washingtoncommandcenter5541 Wasn’t trying to undersell it. I think it’s the best ambi lower and if I wanted another I’d probably buy this again. I do like that the mag release locks back the bolt, that’s a really cool feature and useful for malfunctions for sure. Not a fan of side charging uppers personally but yes it’s a great lower. The price is just expensive and you can get about the same effectiveness from a 150$ aero upper and a bad lever. I like them a lot, just wasn’t necessary for me. I wish I could’ve kept it though.

@@GearAndGuns I came from many years of a Robinson XCR being my go to before is started building ARs. So I'm more comfortable with side-chargers and find them more intuitive, easier to use, and I like being able to run the gun without having to come up off the sights. Gibbz G4 non-reciprocating left side charging upper combined with the ADAC it further simplifies a high-stress potentially life saving process. I even have ADACs on my Virtuses, and them, along with Virtus's thick I.D. SD rails that fit my fat Hyperion and Nelson Cans and the trouble is went through to put a RB/Tommy E3 safety into them have kept me from even considering the Spear LT. Alone, both are my favorite Upper/Lower but they're even better together. If Radian added the FAR superior Fal/XCR/ACR/Bren type bolt release like RRA LAR-8 or Bushmaster BAR-10s had, to the ADAC, it would add another benefit outside of the Dual Action catch for right handed shooters and IMO make it the perfect lower. OR IMO if Robinson/Bren could license the dual action catch(along with Robinson moving from monolithic to interchangeable rails) they could be the best rifles period, that's how beneficial I think that function is lol

@@washingtoncommandcenter5541 I understand how side charging handles can be easier for you. New spear lts are decent. Yeah that adac bolt release is kinda hard to hit. I’m not super familiar with some of those firearms but I hear what you’re saying.

@@GearAndGuns The Bolt catch/Release are located at the bottom or inside the trigger guard for all of them and easy to get to without breaking your grip. the Rock River LAR-8 and Bushmaster Bar-10 are AR-10 pattern guns that have FAL style Bolt catches in front of the trigger and also take fal mags.

@@washingtoncommandcenter5541 that would be sweet.

@@brandondane4777 It’s not that I don’t like them. Ive just never been able to try/use them and haven’t looked into solgw. Bcm is the gold standard for upper receivers and a safe and good choice. Unfortunately I don’t make enough to try out a bunch of different options. I’ve heard sol makes decent stuff though. Haven’t heard much about them in general. I have to make safe bets because these are my personal firearms.

@@GearAndGuns I know what u mean. I’m trying to figure out what 11.5 to get. I was going to get the Bcm upper. But I don’t think they have the break on it I need for my can. Or idk what they call it. Right now I have the dead air Knox adapter. And also I never see a lower on the web site. And I’m not smart enough to put them together. I need one already put together. Where can I find the Bcm lower put together or just a Bcm 11.5 pistol. So I can change out flash hider

@@brandondane4777Theres a lot of good upper companies just depends how much you want to spend. I don’t think bcm sells their uppers with that suppressor adapter. You would either have to buy it and install it yourself or send it out to a company to get them to install if. Bcm doesn’t currently make complete lower receivers and the ones they used to make are super hard to get. I wish they were more easily obtainable. I use an aero precision lower with my bcm upper. That’s a very common combo. Aero precision sells complete ar15 lower receivers with the pistol brace and without the stock attached, just a bare buffer tube. I would just buy one of their complete lower receivers with or without the brace, add the brace if need be, then buy one of bcms uppers and get the muzzle device you need on there. Aero precision lowers work well. Hope this helps. Let me know if you have anymore questions.

@@arvindavevelasco125 I’d recommend the RCR. Can’t go wrong with either though. I bought the acro p2 a long time ago and have been using it on my 17 with no problems, it’s been great. That being said I’ve seen a decent amount of complaints from hard use on the acro p2 causing fog or glass to break, but the amount of complaints compared to the amount of p2s that are out there is small. The RCR is still new but I haven’t seen any problems with it yet. Usually it takes a little bit before problems arise but I’d be confident in choosing either one. I mainly recommend the rcr because it’s newer it doesn’t have complaints like the p2. Rcr buttons are easier to activate and I think the battery cap is metal, p2 is plastic. The glass is wider giving advantage to transitions while the acro glass is taller giving the advantage to the recoil tracking. The rcr has a blue tint to the glass which I don’t really like while the p2 is more clear. If your slide is milled or you have an adapter for the rmr, you can use any of trijicons 4 pistol red dots. I haven’t been able to use the Rcr but looks promising. If I bought another I’d want to try out the rcr. I use the rmr hd on my edc 19 so the Rcr would be compatible with that mounting system. Whatever you feel more comfortable with. Hope this helps.

@@bluebirdpowers8069 I’m not sure, sorry. You’d have to ask bcm or Daniel defense.

@@anthonycurtis4108 I’ve heard that a lot. Also toothpaste, clp, and other methods.

@@Gwillis7 Both shown in the videos are large latch charging handles. I prefer them, a little easier for handling. Medium latch are definitely useable though.

@@aaronvargas3580 It’s a great option for sure. Yeah it’s on there solid. 💪🏼

@@aaronvargas3580 No problems so far. I have somewhere between 2-3,000 rounds on this optic setup and haven’t had any screws coming loose or shearing off. If you make sure to use a good thread locker for your screws and have a quality mounting plate you should have no issues. If I were to get another mounting plate I’d get the forward controls one, I think it’s a little higher quality then this, but I’m sure aimpoint’s mounting plate is good enough. The shearing off I think is usually due to cheap and low quality screws like the ones Glock sends with their mos plates. Really cheap, weak material stuff. Forward controls and aimpoint send their own screws that are better quality. Screws coming loose is due to not being torqued to spec/tight enough and not using thread locker on the screws.

@@GearAndGuns thanks for the reply and I just subscribed to your channel 👍

@@aaronvargas3580 No problem. Happy to help. I appreciate that thank you.

@@christophergarcia1027 Thank you. Do you have this same model with the mesa tactical stock? Is the cheek riser drifting backwards or what exactly do you mean by the stock drifting? I haven’t had that occur. If you’re talking about the cheek riser, yes you could tighten down the screws on each side and put thread locker on them. There’s screws and a nut for each screw. If you’re talking about the entire stock, you’ll have to tighten whatever is holding the stock in and put some thread locker on that too if you can. I haven’t had to do that yet though. Let me know if you have anymore questions. Hope this helps brother. 🤝🏼

@@stubbz71 I have the Geissele Ssa-e trigger in it. Shot about 15 rounds fine, now my hammer won’t push down and lock behind the trigger latch even with the upper off the lower. Not sure if something got stuck down behind there or what. Haven’t had time to look into it more. I thought it would work with any milspec lower. If not I’ll be pretty annoyed and have to buy the mcx trigger.

Called sig and they said pretty much all milspec triggers will work with the LT line.

I wipe the excess off. That’s a good point with the primers, thanks for the advice.

@@Deltamikeacademy Glad you like it. I like them too. Always wanted to try out the super duty uppers. I heard they a bit more heavy. I can see how that’d be too long in a vehicle.

@@PNW_Sportbike_Life That’s another good option. I usually use painters tape for my optics. Electrical tape will work, it can just leave an adhesive black residue on there.

@@GearAndGuns that is true! Painters tape is probably better

@@ericsantiago3778 Water doesn’t work. I don’t think glass cleaner will either. It last 3-6 months or more depending how much you use it which isn’t bad for 17$. You don’t have to buy it if you don’t want. I like it and it works well.

@@bheckner Ambi lowers are more expensive. This lower also comes almost complete with the radian safety, radian parts, and the self adjusting receiver tensioner. Definitely high priced but radian sets the price where they want it.

@@GearAndGuns ambidextrous is one thing useful. A left hand upper is another. A good friend got one for a family member, now that wasn't cheap. Receiver, bolt carrier. Everything is backwards.

@@bheckner I understand. Manufacturers set the price they want.

@@lordmalice8368 Yes, decently expensive but lasts for a long time. You can get 3-6 months out of this bottle depending on how much you use it. Only takes 1 drop to clean.

@@milldawgj9598 Those are other good cleaners.

@@liampatton2484 Yes I forgot to mention this. Great way to extend your flashing brightness for a longer longer period of time.

@@ipour5s Vortex Torque Wrench. Pretty good but it only goes to 55. There’s a similar one of Amazon that goes higher. Both can be bought on Amazon.

@@POPJack1717 That’s a decent budget option. I don’t recommend the 509T over the Rcr or the acro p2. The Rcr is probably the best closed emitter on the market in my opinion.

@@roostershooter76 Benelli is the best shotgun no doubt. It’s use in the military and how reliable it is. I still do prefer the weight savings because I’m a civilian and don’t need a “bomb proof” shotgun. Benelli was built for war, beretta was more a civilian tactical shotgun that can be used for combat. Although it’s plastic i think it’s still plenty reliable and wont break under most conditions. Both the beretta and benelli can be loaded 7+2 with the extra round on the lifter. Can’t go wrong with either in my opinion. I don’t think most civilians need benelli durability but I understand wanting the reliability for peace of mind. For me I benefit more from the weight savings. Hope that m4 is working out for you. Thank you for your service! 🫡🤝🏼

@@BossHugo84 First time seeing the ghetto blaster. Those are all solid options.

@@GearAndGuns I have them all I love small PDW in 300 Blk

@@BossHugo84 That’s awesome. I’d love to have more to try them. Small 300 black suppressed is fun.

@@GearAndGuns I just love Small Guns with Big Power . Like my 7inch Gen12 shot gun or 8inch AR10 8.6 Blkackout .

@@BossHugo84 I feel you. That gen 12 is sweet.

@@WoLF-xp3cy Unfortunately I don’t know, sorry. I didn’t try to remove it and I sold my benelli m4. It should be the same removal process as on the original m4. Only difference is that stock twists. I’m sure there’s videos on how to remove them on the original m4, try the method that they do in those videos.

@@Marquez_88 It’s easier to mount it with the slide, recoil spring, and barrel off the lower receiver or frame. I can lay the slide on a flat surface to ensure everything is lined up properly. There’s less chance for cross threading the screws or error. I’d also frees up one hand so I’m not holding the entire gun in one hand or laying the gun on its side. I prefer to do it this what and that’s what I recommend but It’s optional, you can do it however you’d like.

@@armorers_wrench I’d love to have a knights 11.5 and 14.5. Just so expensive and hard to get. An mk18 10.3 would be cool as well. Yeah they make quality stuff. Thanks for the information. Bcm is plenty fine. Geissele is sold forsure. Always wanted to try or have there urgi or super duty. I heard the super duty is better but significantly heavier. Can’t go wrong with any of those 3 brands forsure.

@@cipowins42 what’s your budget? You can do what I did.

@@GearAndGuns Not $500. 😁

@@cipowins42 Streamlight protac rail mount HL-X is a good budget option. You can buy it on Amazon. Costs 120$. Comes with a pressure pad and mlok mount. The mlok mount is an offset mount. It will attach closely to the hand guard but will curve up at an angle. The mount is made for an ar but it should work. If it doesn’t, you can purchase a different mount cheaply. The pressure pad is held on by an adhesive so it comes with zip ties to zip tie that and your cable.

@@carlgauss647 Yes that’s what this benelli is. It’s the new version “gen 2”.

@@nathanrivera6964 😂

@@AldebaranIsAstar what’s up?

@@TheTeeWorldsfreak Definitely expensive. If I would’ve done it again I would’ve just bought the full sig gun. Cool conversion kit though.

@@moo3852 You should be able to. Others are saying you can on pump actions as long as there is a lifter. Instead of pulling back the charging handle you’ll just pull back the racker and control the bolt that way. Should be able to push one down on the lifter. I don’t have my 590 anymore to try it sorry.

@@wood-wheel-wizard Yeah it was one of them. Put my 11.5 in place of it for now until I get this build done. Forgot about the dissent. That’s a solid option. I didn’t like the built in hand stop or the side charging. How’s it working for you?

@@moderngunguy3666 I like to put more than less, gives me more peace of mind. You’re free to use however much you see fit.

@@GearAndGuns lol Even if you like to put more that's still way too much lol 😆

@@moderngunguy3666 You’re right. I always use to much, same with lubing lol.

@@GearAndGuns 🤣 But you can never have too much lube lol

@@moderngunguy3666 I didn’t like how pws was a long stroke piston, more mass reciprocating, also didn’t like the picatinny sections at the end of the hand guard. Not a big deal, but it’s also 9.75”. Longer than this. The 3 adjustable gas positions is nice. I’m sure it’s a good rifle. I was looking for compactness for this build, wanted something small since I already have an 11.5 5.56. Cool factor is higher on this or the badger but honestly don’t really care about something being cool, I try to focus on function, use case and practicality.

@@GearAndGuns it's actually only 1 in longer it's 7.75 in. But yeah everything else just depends on what you're looking for. But probably has one of the smoothest actions you're going to find, and the main point was it's just a better rifle overall.. But yeah clearly not what you were looking for. For me if a rifle doesn't have any kind of cool factor than I ain't even looking at it lol I treat my guns like my ladies looks come first You don't get in just because of your looks but that's how you get your foot in the door lol 🤣

@@moderngunguy3666Which pws are you looking at? I only see the 109 at 9.75”. Unfortunately don’t have tons of money to buy and test out all the options, that’s why I went with this half ass rattler. I’m sure it’s a solid gun. I understand what you mean. Looks are a bonus but I personally don’t put them first.

@@GearAndGuns Yeah they have a 107, Yeah I would still do the same thing you did also I would buy a rattler I already have PWS so Rattlers said something I've been looking at also

@@moderngunguy3666 What I’m seeing the 107 is .223 wylde. I was wanting 300 blk. I personally don’t think 556 is very effective under 10”. Id love to have a 10.3 mk18. If I did it all again and had more money, I probably would’ve just bought the entire rattler gun instead of doing the conversion kit. This isn’t a bad option, I’d just like to have the whole sig firearm.

@@Navirsk Hope you like it. Definitely a solid option.

@@cops312 Looks like there’s a piece cut out in the adapter for it but I’m Not surprised if it isn’t compatible. Another disappointment smh. Thanks for the information.

It’s not the adapter that’s the problem, but the milspec lower has that ring made for screwing on the buffer tube is what causes the issue.

@@cops312 interesting. Thanks for letting me know.

@@shawnbrockman9729 ?

@@uyfj9312 It costed me 350$ as well. They charge what they want when they’re the only one who makes it like that. I don’t think it’s a rip off but definitely expensive. I’m selling mine with the freedom fighter tactical springs/washers and (2) 8 round shotgun cards for 250$ total if you want it.

@@GearAndGuns well my problem is it costs more than my shotgun that's the thing and will it fit a citadel warthog? I just think it's a rip-off because it's a handguard even a handguard for my AR-15 is like 80 bucks that's more reasonable if the handguard was made out of tungsten or titanium yeah I would understand the price but if it's just aluminum like most are then I don't really see how they can justify charging that much also what are shotgun cards?

@@uyfj9312 I understand that. It’s made for benelli m4 so unfortunately it won’t fit the citadel. I can see why you think it’s a rip off. They justify charging that much because no one else makes a full mlok hand guard like theirs. Shotgun cards are a Velcro backed shotgun shell holder that usually just stuck on the side of the receiver.

@@GearAndGuns oh okay yeah I know what those are I've just never heard it called that before and yeah I get that they're the only ones that make something like that but at the same time though still I mean especially with how people are hurting for money right now it just seems extremely greedy for me I work for a Christian Camp I make $16 an hour that's literally like 3 1/2 almost 4 days that I would have to work in order to front that kind of money not to mention bills rent car insurance gas and considering I live in California those are all pretty high I feel like they would make more money if they dropped it down to like $150 maybe $180 max they would certainly sell more of them that's for sure and will it work on the Panzer arms M4 clone I know probably but it doesn't hurt to ask I just miss making shitloads of money with the business I used to have before covid back then I could just swipe my card and not even look at the price and not have to worry about it

@@uyfj9312 unfortunately most companies are greedy, that’s just the way of the world. Living in California is tough it’s super expensive there but I respect you for working for a Christian camp. They also might not sell a lot of them so they charge alot for them. I’m not sure if it does, it says benelli m4 and m1014 models but you’d have to ask briley on that. If it’s designed the same way as the benelli I would think it would work but can’t say for sure.

@@xxTheMajorxx Thank you. Happy to help.

@@kytodd7802 No problem. Hope it helped!