Відео

What is that switch next to your speedometer? Mine is missing, and the previous owner doesn't remember what the switch is for. Thanks in advance

Something is buzzing when i hit the button to turn over the engine. Can anyone like help me out?

I think you've got the gasket upside down. I found it works well if you put the gasket in the airbox first, then push the air filter into place. Works great on my Big Bear.

The Vehicle Identification Number number??

Do these small engines require mixed gas my son has one but i dont know if it uses straight gas or mixed gas its a 2002 polaris sportsman 90 cc

Toothpaste with 600 grit finish of with 1000 then polish.

1:12

by any chance, dose the seal inside of the master cylinder stay put i’m having a issue where mine keeps dropping and i’ve noticed the seal in the master keep moving the second i pump my brakes and it dose not fit in the hole that’s already there should it fit ?

Shoulda used the rest of that wipe on your fenders.

Did you do a video on engine lite reset?

How does that help, on what planet are years represented by letters. If you don't have the code, what help is a letter

My 95 kodiak has no dash lights at all when key is on and no click or start or crank when pushing start button. only starts with pull start.

What is the switch next to the speedo

I just had the same issue with a 2004 Sportsman 90.This line was actually melted and busted off. Who knows how long it was that way. I was looking to take the flywheel off and go into it that way, but I had some hospital tools and held it and replaced it with some yellow line so I can actually see. The pump is probably also on its way out. The line had spots of oil, so I had them to keep mixing their fuel so that can actually remove the oil tank from the equation.

Its a the carb cranks great

Would you be able to do a video of where the fuel and air lines go from the carb, fuel pump and tank. I bougbt the same year quad and they didnt have any lines hooked up

Very helpful, thank you

I agree, great video!…

What happens when it’s a 185s or 200s and the vin was a sticker. Now after sitting in a field for 20+ years the sticker blew away 😢

Glad I found this…brought mine back to mint condition! Thanks!🎉

I'm here now for my confession. After I let a kid start up my Kodiak for fun, it later refused to start. I checked everything - connections, switches, fuses, battery, grounds, relay, even regulator. NO LUCK. Then I sat on the quad and tried to remember what he might have done while sitting on it. Then I discovered a very small button I NEVER KNEW EXISTED under the starter switch - the engine kill switch. So after replacing the solenoid and almost submitting to a mechanic for help, I found the problem. The kid had hit that button by accident I never knew it. I told my wife I had finally found a loose plastic wire connector, so we'll leave it at that.

So we have a 1999 kodiak changed out starter silenod key switch and start button and nothing no clicks no starts acts as if no power to the key switch or the run on off start button . Could it be just a dead battery or possibly something else ? All the fuses are good cables exct checked alot of stuff so far everything checked out good so would it be just a bad battery?

What year is “A” for a Yamaha big bear 350cc

Could i use steel wool to remove rust over the vin number. I can barely see my vin on my kawasaki 300

I went through the exact same thing. Very hard to get on.

I'm currently in the process of fixing up an old yamaha. Big problem was the cdi but it seems to need every little thing. I picked up 3/8" "marine/automotive" weather stripping for the air filter gasket. It worked great and ive got plenty left over for other things. Previous owners' ratted up the wiring pretty bad. They threw all the ignition parts at it, breaking bolts in the process. Five mins with a meter would have shown a dead short on the ignition output of the CDI. It definitely took me longer than five mins to know that...

What is the best way to clear the plugged port on the carb?

I would like to purchase as a parts quad

Thanks much!

It cranks perfect 🤙

How can I find a video to install the choke cable? Or adjust

What if you can’t get serial numbers from being worn out..the last few from foot rest being installed…

Thank you for this video!! I woke up and my 2002 Foreman had lost all it's oil on the garage floor. Found your video and guess what I had, a shift shaft seal that was pushed out and leaking! This wheeler was my dads and has ton of sentimental value so thanks again for posting this.

Dude make more videos and get some merch.ill buy some merch because you are awesome .you got straight to the point without no click bait B's and and a bunch of self loving fame seeking.thankyou I'll spread your channel.

love the vid i have the same quad picked it up for 450 bucks its a great beater to run around on great job getting her going cant wait for the next vid

Thanks

Lol, I need to go back and look at mine again. I think I actually used it on the back side to push the filter in because I couldnt get it to fit. Wondering if you took the gasket and two pieces of wood or plastic to a vise for a day or two if you could compress it a little. Those aftermarket filters you had are actually too tight for the basket and split at the seam. Thanks for posting the part number. I think its actually less expensive than the aftermarket one...

Bruhhhhhhhhhhhhhhh fuck the Yamaha filters ima bout to set my shit on fire and roast fire crackers

I got a the 2001 and it idles no problem, but no forward thrust when you throttle, just sounds bogging. Do you have any tips?

Yeah man straight and to the point that's the way thanx!!

Love the accent!

This videos was very straightforward and useful thanks!. Some A...Hole stole my kodiak since I got it back they stripped parts and the brakes aren't working! Anybody know where to find a seat for a 1996-1998 Kodiak 400? I don't have one and having trouble finding one

Thanks for your help. My 400 stopped starting with the switch and only would start with a few pulls. Got a new solenoid and still did not start. Just about to order a new starter when I come upon your video. Going to get a new switch first as I too have been having trouble with the high beems not being as bright as they used to be. Thanks Kevin

What if it doesn’t turn on at all

Hello Jason I thought I recognized your voice then I saw your shop and knew it was you. I have the same problem with oil dripping down my engine. Brian Dolata

What brand cam did you buy?

how do i know if is the swich, because when i turn it off with the key it works but it wont start when i puss the grey boton

Very nice

Any tips? I have done this a couple of times and My light still flashing. Did also open the drive cover and belt seem fine and switch was on the on position. I'm getting no luck!

that helped a lot thanks!