- 38
- 594 920
Robert Curnutte
Приєднався 22 сер 2012
Subaru sti straight cut gear in car sound
City cruising in a ppg 1-4 straight cut transmission. In cabin noise of how loud the transmission is.
Переглядів: 131
Відео
700hp sti mountain exhaust sounds
Переглядів 1937 годин тому
770hp sti with ETS exhaust PTE 6466 t51r, PPG gears and much more. Short video of the sound of the car on the mountain roads.
800hp STI cold starts. Invidia N1 street vs ETS 3” Catback Exhaust
Переглядів 9873 місяці тому
Little comparison between the N1 Street and the ETS Catback Exhaust. Not too much difference between the two because they both have a resonator in the midpipe. Only difference between the two is the shape of the can muffler 
800hp STI sounds
Переглядів 16 тис.Рік тому
Different videos of my car with the stock 6466 cover vs the T51r and straight cut gears.
PPG Straight Cut Gear Subaru Sti
Переглядів 10 тис.Рік тому
IAG PPG 1-4 straight cut gear and transfer gears sound.
PTE 6466 1.05 A/R, 850hp STI
Переглядів 2,7 тис.Рік тому
Went to a bigger hotside so the turbo doesn’t have to work as hard with the PPG 1-4 gears. Turbo made 40 psi on the dyno which ended up putting down 854hp 678tq. Smooth power and holds all the way up top.
IAG Performance 1-4 straight cut gears + transfer gears sound
Переглядів 1,9 тис.Рік тому
Short sound clip of how the IAG straight cut gears with transfer gears sound at low rpm low speed.
6466 stock cover vs T51R cover
Переглядів 21 тис.Рік тому
PTE 6466 stock turbo cover comparison to the BoostLab T51R cover
900hp STI quick pull
Переглядів 7 тис.2 роки тому
900hp sti doing a 2nd 3rd gear pull. My neighbors love me.
E85 cold start ID 2600s
Переглядів 8982 роки тому
Morning cold start with ID2600cc injectors on e85. Garage temp was around 45ish, outside temp low 30s
6466 sti 800+hp
Переглядів 8 тис.2 роки тому
Adding a little more power to my car after getting a bigger wastegate. Car in on a Mickey Thomson drag radials so it does make over 900hp on the street. Motor build: Outfront V4 closed deck block Manley i beam rods Manley pistons King rod and main bearings GSC S2 cams, ported heads GSC beehive springs and retainers Athena Pro Seal head gaskets Exhaust: MAPerformance header ETS rotated kit Turbo...
Lol are you in albuquerque pretty sure that's paseo del norte
@@michaelfay66 💯% correct.
@robertcurnutte24 that is too funny I have a 22 wrx I posted a few clips of it
@@michaelfay66 it’s funny for how big the YT platform is, that there are so many people that recognize Abq right away.
@robertcurnutte24 right how much did 700 hp cost you did you use cam?
@@michaelfay66 I’ve been using Cam since 2008. I use to have a 2006 sti then I wrecked it and he bought it off me so he could do the 6 speed swap into his wagon. I bought my 05 sti in 2009 and over the years it’s had a few different power plants. In 2020 we did the big power build and it was expensive. Car has made 900hp but I recently turned it down to its current 770hp. A lot more enjoyable to drive now.
Sounds sexy asf. 😩
Thank you.
Great audio quality, sounds amazing
@@delta-tuning iPhone 14 Pro Max. Just a nice quiet day in the mountains with little wind.
+1 That t51 sounds great
@@slowdime5585 it’s very loud
@@robertcurnutte24 I wish my fp green could be done similarly
More videos, please 😭 literally my favorite STi on the Internet, hands down
@@Affinity111 I’ll try to get more footage, and upload more often.
@@robertcurnutte24 put the camera inside when u cruise around, we will all enjoy it <3
@@NimaSomeh I need to find a good mount for my phone since that’s what I use. All the in car footage that I do have is from my phone in the sun visor.
Uff sounds so good
Sounds great bro !!!
@@STIMajd07 thank you
sounds so good
@@qwok3698 thank you
Albuquerque?
@@InvalidUsername480 yes. Tramway
@robertcurnutte24 lol I knew it! I grew up there and I recognized that pedestrian bridge.
@@InvalidUsername480 I miss living up in that area. I love where I live now, but it’s definitely not a 10 minute walk to the foothills anymore.
@robertcurnutte24 there's definitely somethings I miss about ABQ. You're obviously a car guy and I remember being in high school and Friday and Saturday nights were spent drag racing on Montgomery. And if you had a really fast car you went down to Renaissance down by Costco but back then it was Price Club.
I came at 2:39
A manual Subaru beating a automatic SRT in a roll race is fucking mental
i definetly want to do this to my car when im old enough to have one
Your a legend bro !
is that grinding noise normal at 0:37? bought my saabaru a couple monthd ago and i get that noise. been worried about it but can never figure out what it is lol. i guess i have straight cut gears?
Assuming its an sti or wrx, it could be normal. They tend to have louder transmission than most cars. Still, it should not be nearly as loud as this one. Get it checked though
@@brayan_m yeah i figured out i have straight cut gears, i own a 92x so its basically a 2005 wrx, i never knew straight cut gears where loud like that
Can you flat foot shift these gears?
@@grassbag1 yes.
sounds no nothing like A t5r
One thing ive noticed if the subaru doesn't have a wing, or a hood scoop and it sounds like a jet getting ready to take off, dont race it
Cold Shivers 😏
How good is light throttle cruising on those injectors? I am planning to get id2600 for evo. Thanks
@@boostedchrys as long as you have a good tuner who will take the time to make the drivability work good then the injectors are great. But if you don’t then I’d stick with something like the FIC 2150cc’s
@@robertcurnutte24 I am tuning it myself and I will spend a lot of time to make them run good. I have FIC2150 currently and, a lot of problems with them. 2150 are injectors for cng fuel and they are restricted with flow when they get very warm, especially with 2 big fuel pumps in tank, fuel gets hot very fast. They still work ok but not the best option. Thanks a lot for help will try id2600 to see how they perform.
@@boostedchrys best of luck with the 2600s
what bov and wastegate and exhaust housing you have on that bad boy, she gets down quick
@@CjHancock-w4y tial 50mm bov, Tial 44mm gate, and ETS rotated kit to a Invidia Street N1 catback
Not for 375$
jeez standing in front of a car on the rollers is stoopid in the extreme ,,,if it jumps or breaks a strap OR it goes pop on the rollers ,,,that little desk fan wont help you
I HAVE WATCHED THIS VIDEO 50000 TIMES I NEED IT
@@Untamed_STI definitely the best thing I have bought for the car.
That's not a hellcat its a scat pack! i would say the subi is around 440 ish maby a bit more on a dyno dynamics dyno. Thats how it goes with my car. Ill give the hit too. Love it.
@@chapmanmerchant might want to add another 430hp to that number.
Bad ass.
🤤🤤🤤🤤🤤
This is the new flex, better than exhaust noises
@@69lol69 just 10x the price of an exhaust lol
@@robertcurnutte24 yes and its worth it
@@69lol69 it definitely was worth it.
sounds great!
That STI driver knows how to party haha
Some good shifting that day.
My stock Miata would gap that pos 🥱
... down in mexico
I need to know his mods in the wrx. Like now. 😅
A ton. I’m sure I’ll forget a few but this is what I got. Outfront v4 closed deck block, Manley rods, Manly pistons, king rod and main bearings. GSC valves, springs, retainers, GSC S2 cams, cnc ported heads, 1/2” head studs. ETS rotated kit w/ 6466, ETS 4” fmic. ported intake manifold. 2600cc injectors, radium surge tank w/ twin 450 pumps, 255lph feed pump, -8 feed -6 return lines. Tial 44mm gate. 07+ gears, DSS rear axles, all solid mounts ( motor, trans, ) RCM oil pump, oil cooler, T51r mod on turbo. There’s a lot more done to the car now vs when this video was taken.
@robertcurnutte24 that is amazing! I have taken a screen shot. I have 2018 and warranty will be up soon so I can mod fully. And this would be amazing. I don't think I'll go as far as you have but I have something to work off of as a leveler. That is quiet the investment. What's your dyno look like?
@@shirleyaspasia2159 in this video the car made 870hp and 740tq. A few months later did some changes and turned the cut up and maxed out the turbo and made 900hp. Now it has a a better transmission with straight cut gears, and recently turned the power down to 770hp
“Its my family car”
this turbo has an engine
Have you done a draggy 60-130? Curious to see what times an sti like this does
I haven’t. I’d be curious to what it does also.
Sounds like a damn jet during taxi lmaooo insane
And then his engine blew
Love your build!!!
Thank you
@@robertcurnutte24 no problem. 15 years ago I had an 07 sti and it was my dream car/still is. It kept breaking my heart blowing up 3-4 times even when built by Cobb tuning in Plano etc. I moved on to an N/A platform C6z’s and foxbodys now. To this day sti’s are the funnest cars I’ve ever been in and would own another if they were reliable. To me the are the ultimate all around car. I actually bought my wife a 2022 wrx limited recently tho, it’ll be staying stock.
Did it not piss anyone else off how he counted down…
Fuuuck that's lovely
Now tune the hellcat the same way the STi is, bloodbath :D
this nigga in a stock hellcat redeye in eco mode and he is not pressing the gas hard
Subsru will need an engine rebuild after that one.
Just the transmission. Engine is still fine.
Sounds so Good! It would tempt me to Hoon around too much or just keep driving more and more and burn gas! 😎
Too bad I've only ever seen salvage rebuilt subarus every single time I'm on Carfax... it's never any different. 50k miles or 100k miles... great looking and sounding cars though 🤷♂️
Never race a STI without spoiler
Bet his trunk leaks
Why would it leak?
At this point mopars are the lamest things on the road. Ghetto people ruined them.
yea I wanna know how many times sTi dude rebuilds that engine a year xD
Engine hasn’t seen a rebuild in the 4 years it’s been in the car. I’ve been through 3 transmissions though.
Sti sounded like something outta jurassic park when he was along side the Hellcat