Відео

Ironically, this video is considerably better with the sound off.

Thanks for showing ❤

****UPDATE: I figured it out! ...and without breaking it! Okay, the rocker plate does, in fact, come off with extra exerted force as I originally thought. the trick to releasing it without breaking is: Using a stiff pry tool (preferably non-marring such as glass reinforced ABS pry tool) but a medium size flat head screwdriver will work in a pinch. Going at only one side at a time, have the rocker plate in the "high angle" position and you will see the two points that attach it to the mouse. It is snapped in and can be snapped back out but care must be taken not to break the posts that hold it in place. Using the pry tool, slide it in from the outside end (not between the two attachment points, but from the opposite side), and while pressing the posts (attachment point) toward the other (toward the center of the mouse), also pry the plate away from the mouse body, GENTLY. it will finally snap out, and you can do the same to the other side. Now you will have access to all the screws holding the shell together, and not have a broken shell that needs to be super glued back together!

I'd love to get your torn down Meta glasses so I can do some hardware testing on them. I see a number of exposed test pins we all want to see probed!

Does anyone know where I can get a battery for this model? (xiaomi smart band 7 pro)

Why are you pulling hard on the lens? Just turn it 90° and you can easily pull it out🤌

broooo thank you so much!! i have a flywoo kit on the way and could not find a video on a GP12 teardown until now!! thank you!!!

Robust magnet

how to disassemble the speakers?

model D-83B

Not a complete tear down. Still needed to tear down the speakers with the audio jack and changing port cables. Boo. Did everything but the specific thing I was looking for lmao

Mine keeps saying bag is full, it's not full. It cycles 3 times and just stops working or it says no bag and there is a bag smh

Thanks for the video. Can you please tell me whether the Quest Pro uses identical joystick modules to the Quest 2? You can find third party replacement joystick modules for Q2 on Amazon etc, but nothing for QPro. It would be great if you could confirm whether it's the exact same part or not.

awesome teardown

Can you tell us what camera modules are used for the rgb pass through?

Left stick is drifting so bad uuuugggghhhh

Sonos is garbage.

I did this to fix the stick drift and now my left one doesnt connect anymore

Any schematics of the PCB available? Looks like the Triac that is broken. (and the App doesn't offer a dirt disposal anymore)

Odd size woofer, rather them use pair 10 or 12’s.

ты просто лучший бро

Hi, could you tell me the thickness of your blade?

Can you reupload with the sound? This is a good tear down. The other video I just watched destroyed their pair

Is this video supposed to have sound?

Tell me, if you disconnect the battery, will it just work from Type-C?

Wait. I thought the pen had no battery.

Anyone else already having a joystick go after 10 months? Super unimpressed that they didn't use hall-effect sensors in a 500 dollar controller.. Unacceptable.

Won’t showing the serial number in the video reveal who purchased the unit, so why blur the video? I like the video however!

I wonder if there's a strategic spot where you could drill a few holes and prevent these things from overheating all the damn time

So do you think it’s safe to bend the ear part of the frame?

Hey, appreciate the video. What region was this Quest 3? US/UK/EU/AU?

Is there any way you can fix my quest pro controllers

Very interesting. Thank you

The silence is deafening

so then... there is a ribbon cable on BOTH sides of the plastic frame? both in and out? fuck me such ewaste this is

There was a youtube video on a partial bypass of the 'recording' LED. A sticker over the LED with a pinhole in it greatly reduces visibility without tripping the sensor. Of course it is only a matter of time until the LED/sensor are hardwired out or patched out in software.

You know? You can add voice too man

Thanks a lot for this video!! One interesting thing for me is at 8:50 you show the scroll wheel button. I didn't know it was placed on the right side of the whell shaft. Now I know how to click with less force - still too much force required for my liking, but a bit easier.

Thank you so much

Now put it back together video

If i replaced the screen would that ruins the ip8 ? And make it useless.thanks

No dust protoctor on lens module

the battery can’t be separated from the board?

better wear a mask instead of blurring the video

Man to invest a meta quest 3 into a video and release it with no audio lol. I would add music from YT at least. Its just awkward silence.

Interesting. Thanks for sharing.

why is there no audio?

Well that was a waste of $500 for some UA-cam views. I doubt you can get it back together in working order. I wonder if they'll honor the warranty...lol.

Thanks for you Video.

Thanks for sharing this video. Any chance you could share the full version of the video? I want to attempt to replace my face tracking module (broken by sweat) with one from another (anything else) broken Quest Pro. Based on your tear down, do you think that's something I could accomplish?