I hope that the link you provided for the attiny85 USB board driver will germ at my current windows10 and my look the same modules, thanks for spreading your experience
You should title this video something like "attiny/digistump serial output" I found it looking for something that would describe the pinout, but what you do is a handy thing that I just assumed I couldn't do outside of hacky software serial stuff on the attiny.
My digispark attiny85 after some experiments got the green light stuck (no more red light and Windows does not recognize it).... reading here and there i understood it is a Bootloader problem... how i can fix it with the console from arduino? What should i do? Any help on that? Thanks
i have a problem i want a servo motor to operate in 2 different speeds with 2 diffrent clicks on button for example normal 120 degree rotation speed at single click and fast 120 degree rotation at double click using on off tactile switch using a cr123a battery.all these using a pcb or arduino in the most smallest space is it possible?
In my DigiSpark Examples area I got a SoftSerialExample sketch. It works for 2 way serial. I used it to test my new Logic Analyzer here i.imgur.com/JicJ3QU.png
Nope, this is serial over an external UART interface hence not included in the original device... There is already an UART interface in the Digispark to upload sketches but it seems absolutely useless when it comes to use it otherwise. What I want to do is to connect the Digispark on my USB port and being able to whether upload sketches or get serial communication without any other device. One USB, many usages!!!
@@AntonyCartwright thats interesting! you can upload, without any uart interface (i think in that attiny85 board is nothing like that) soo the big elephant in the room, or however you brits call that ;) is: how does it work and is it possible to get messages without any interface between the attiny and pc.
Your value for "Serial.begin(115200);" is to high, my Serial Windows show ????????? I set this to "Serial.begin(9600);" and everything works fine. Thank you !
WHY BOTHER TO SHOW THE DISPLAY WHEN THE TEXT IS TOO SMALL FOR US OLD FOLKS TO READ? Especially since it is so easy to make the text fill the screen in the Arduino software.? I would really love to be able to see the screen so I could duplicate, (or at least be able to understand), what you are doing on a step by step basis,,,, I NEED THE INFORMATION YOU ARE PRESENTING SO I AM EXTREMELY FRUSTRATED BECAUSE i CANNOT READ THE TEXT ON THE SCREEN. I understand that the lack of ability to read the fine print is entirely mine, but there is nothing I can do about it on my end,...... but you can easily fix it on your end;; and I know how easy it would have been to expand the text on your screen.. Please consider expanding the text on future tutorial videos and possibly even re-doing this one so us visually handicapped old people can enjoy them too! Thank you for reading my selfish rant, Dennis O.
o, ok. well, I don't really understand the use in having such a tiny arduino chip when you have to use it with another device -- which is almost the same size as arduino nano which has way more functionality by itself...
Software serial they can. I have an Attiny85 running i2c to serial between a pro mini and a yx5300 mp3 module. So it can be done. I suspect he actually means programming via UART. His video is ok. But not the clearest of descriptions.
i have error " upload 80% ...find arduino 1.6 " then it stop and say's unplug the arduino i dont now how to correct that..i did exactly like you and when i test it with keyboard option it want work see error here image.noelshack.com/fichiers/2017/52/3/1514329921-aaa.png
Yep, i'm sure it's just a troll, but it never ceases to amaze me how bloody ungrateful people on here can be. I mean....it's free, great info....and some people seem to expect damn Hollywood production values, and spoon-fed details. Man...i feel for ya Antony. I know i couldn't be as polite as you are on here. Anyway....thanks for the suffering, mate!
This is the easiest video to understand the attiny85... Thanks!
Thanks Carl
I hope that the link you provided for the attiny85 USB board driver will germ at my current windows10 and my look the same modules, thanks for spreading your experience
Thanks for this video, it was quite concise and especially useful for those of us planning to connect via Serial (even if only for debugging). Thanks!
Richard Attenborough wow, thanks Richard. :D :D :D
Great job to the point and dead on. Thank you for taking the time to do this video.
44mod thanks
Cracking video mate, really helped.
Read endless horrific tutorials and other lengthy videos that were no help at all, til I found this. Cheers
entozoon thanks! I try to make them direct and to the point.
OMG - Amazing, this is what I have tried to do and spent ages looking for the right solution. You're amazing
ohh man you helped me to solve a huge problem on my AT85
You should title this video something like "attiny/digistump serial output" I found it looking for something that would describe the pinout, but what you do is a handy thing that I just assumed I couldn't do outside of hacky software serial stuff on the attiny.
Harley Burton thanks, I'll do it now..
My digispark attiny85 after some experiments got the green light stuck (no more red light and Windows does not recognize it).... reading here and there i understood it is a Bootloader problem... how i can fix it with the console from arduino? What should i do? Any help on that? Thanks
works perfectly, I really appreciate the video
i have a problem
i want a servo motor to operate in 2 different speeds with 2 diffrent clicks on button
for example normal 120 degree rotation speed at single click and fast 120 degree rotation at double click using on off tactile switch using a cr123a battery.all these using a pcb or arduino in the most smallest space is it possible?
Thanks! this was really useful. Would this work also with the attiny85 alone (the microchip without the development board)?
In my DigiSpark Examples area I got a SoftSerialExample sketch. It works for 2 way serial. I used it to test my new Logic Analyzer here i.imgur.com/JicJ3QU.png
Worked like a charm!
Thanks man!
Gabriel Pauka Cool!
Best use of this MCU board is to use it as a hid device(making bad USB /running rubber ducky scripts) ;)
Thanks for the tip but I was expecting serial communication via the USB port which would make more sense...
But this is serial over USB!
Nope, this is serial over an external UART interface hence not included in the original device... There is already an UART interface in the Digispark to upload sketches but it seems absolutely useless when it comes to use it otherwise. What I want to do is to connect the Digispark on my USB port and being able to whether upload sketches or get serial communication without any other device. One USB, many usages!!!
I see... Well this module is very weird when it comes to that! If you let me know how to get it working, please let me know!
@@AntonyCartwright thats interesting! you can upload, without any uart interface (i think in that attiny85 board is nothing like that) soo the big elephant in the room, or however you brits call that ;) is: how does it work and is it possible to get messages without any interface between the attiny and pc.
This helped, thanks!
Your value for "Serial.begin(115200);" is to high, my Serial Windows show ?????????
I set this to "Serial.begin(9600);" and everything works fine.
Thank you !
perhaps just solder female socket headers to the board itself, instead of male pin headers ? thank you for posting.
Oooooooh! The USB->UART adaptor... I thought there was a nice trick to avoid the use of it but no. Sad :/
Didn't work for me. IDE still wants me to select a board and port. No serial output for me.
After downloading a driver for my usb/serial board it did work.
WHY BOTHER TO SHOW THE DISPLAY WHEN THE TEXT IS TOO SMALL FOR US OLD FOLKS TO READ?
Especially since it is so easy to make the text fill the screen in the Arduino software.?
I would really love to be able to see the screen so I could duplicate, (or at least be able to understand), what you are doing on a step by step basis,,,,
I NEED THE INFORMATION YOU ARE PRESENTING SO I AM EXTREMELY FRUSTRATED BECAUSE i CANNOT READ THE TEXT ON THE SCREEN.
I understand that the lack of ability to read the fine print is entirely mine, but there is nothing I can do about it on my end,...... but you can easily fix it on your end;; and I know how easy it would have been to expand the text on your screen..
Please consider expanding the text on future tutorial videos and possibly even re-doing this one so us visually handicapped old people can enjoy them too!
Thank you for reading my selfish rant,
Dennis O.
You could make a screenshot and then expand it with Paint or any other software
Thanks
what is that other chip you wired it up with in order to read serial output? nothing mentioned in annotations or description....
Hi, it's at 5:44. Antony...
yes, clearly I have no issues seeing the physical device. I'm wondering the _name_ of the product so that I can actually get one... :l
But at 5:44, I say it's an FTDI UART! If you type that into ebay, you'll see it! :-)
o, ok. well, I don't really understand the use in having such a tiny arduino chip when you have to use it with another device -- which is almost the same size as arduino nano which has way more functionality by itself...
The idea is that when you deploy the project, you take the programmer away. :-)
what about RX pin?????
they cannot received serial??
thanks.
Marc.
Software serial they can.
I have an Attiny85 running i2c to serial between a pro mini and a yx5300 mp3 module. So it can be done.
I suspect he actually means programming via UART.
His video is ok. But not the clearest of descriptions.
i have error " upload 80% ...find arduino 1.6 " then it stop and say's unplug the arduino
i dont now how to correct that..i did exactly like you and when i test it with keyboard option it want work
see error here
image.noelshack.com/fichiers/2017/52/3/1514329921-aaa.png
unclear video
Man, you could’ve had a great video. But, you had terrible audio. Get a good mic, pop filter and a space to work in.
じょいすじょん thanks, it's an old video
Bad resolution cant read anything.......dislike
Hi, It's perfectly legible, change your viewing resolution to 1080 and it will be crystal clear. :-)
So rude Lmfao 😂😂😂
John Dripper Funny though! Ha, some people!
False
Yep, i'm sure it's just a troll, but it never ceases to amaze me how bloody ungrateful people on here can be. I mean....it's free, great info....and some people seem to expect damn Hollywood production values, and spoon-fed details. Man...i feel for ya Antony. I know i couldn't be as polite as you are on here. Anyway....thanks for the suffering, mate!