I love your videos and I really want to buy your courses, but the taxes went up to +99$ on the bundle and +75$ if I buy one of the courses (From Sweden) which made it too expensive for me at the moment since I'm a Student, so I'm just wondering if you ever release discount codes through a short period of time or something similiar? :D
this tutorial was super clear and extremely helpful, even for a beginner like me! I've immediately hit the subscrive button, keep up with this great content :)
I find your tutorials great to a point. The section at the end of your video is where most of the important information is and the format is really hard to follow.
for everything that fails to get the color of coffee 12:30 : look at the video "Part 3, Level 3: Glass and Liquid - Blender Beginner Tutorial" at 10:50 (from Blender Guru) he explain how to solve it
May I ask how are you placing the cup, the biscuits so accurately on the plate's surface? Is there a technique other than face-snapping that you are using here ?
Trying to follow along but a bit stuck on adding the bevel modifier to the chocolate chip cube after bisecting it. Confirmed there’s no missing sides (not selecting all before bisecting), no tiny triangles or other polygons (all decently sized cuts), but the bevel modifier does not seem to have any noticable effect, even after modifying the normals to auto smooth at 180 degrees. I’m using Blender 3.3.1. Any thoughts why I’m not seeing the bevel?
Nevermind, found a solution: The problem was I probably had some points that were too close together. The fix is to go into edit mode, and press M, then “By Distance”. This will merge the nearby points. I had to drag the slider up a bit before the bevel modifier became visible. Searching the problem revealed the bevel modifier will not overlap with itself so the cause was having points too close to eachother somewhere. I also noticed when using the normals overlay my entire chocolate chip was red and not blue so I flipped the normals. Hope this helps someone else who runs into a similar issue. That step where the author moves the points away from each other after bisecting has much more importance than it seems.
Sorry for the late answer, but I got the same problem: it's problem with topology of chocolate piece, try to cut it with bisect tool and not leaving small faces
On edit mode, select all vertices or the ones that are too close together and press M, then select "By Distance", on the down left corner you should have a menu where you can increase the distance from which they merge, if the bevel modifier still doesn't do anything increase it until it starts to take effect
I was looking how to make that candy and watched other videos before I found this. This is super easy, I watched how dude made this kinda candy he was literally doing math I knew this is not that hard, thanks ❤️
You're the best ! Thank you so much :) I have a request , do you know how to make shortcut like you for the modifier CTRL 1(like subdivision or others). it doesn't work for me. Thanks again ! 😁
I have been using blender for 2 years and you literally taught me so much with one video that would have made so many of my projects easier LMAO you’re awesome thank you
If you want to create a tutorial then you need to speak with the purpose to teach. You sound like you are talking to your friend and/or teach the material to yourself.
Coffee and cookies in a blender might actually taste good 😂
Haha, yeah. But only if you're in a hurry :D
concise, straight forwards, clear and easy to follow for beginners like me. appreciate it tons.
I love your videos and I really want to buy your courses, but the taxes went up to +99$ on the bundle and +75$ if I buy one of the courses (From Sweden) which made it too expensive for me at the moment since I'm a Student, so I'm just wondering if you ever release discount codes through a short period of time or something similiar? :D
I will put them near the donut
this tutorial was super clear and extremely helpful, even for a beginner like me! I've immediately hit the subscrive button, keep up with this great content :)
Glad you like the content!
the reflection on my coffee doesn't work, how do i fix that? great tutorial i love ur vids!!!
I find your tutorials great to a point. The section at the end of your video is where most of the important information is and the format is really hard to follow.
for everything that fails to get the color of coffee 12:30 :
look at the video "Part 3, Level 3: Glass and Liquid - Blender Beginner Tutorial" at 10:50 (from Blender Guru)
he explain how to solve it
thank you so much T.T
Awesome. More like this please :D
8:30 for whatever reason i can't do it. it's not filled
you deserve the best Polygon, you are my favorite Blender teacher
May I ask how are you placing the cup, the biscuits so accurately on the plate's surface? Is there a technique other than face-snapping that you are using here ?
Not really, I just face snap and then adjust manually
Excellent work as always! I’d like to see your take on a fire house/station with a fire truck.
Thank you! :)
Trying to follow along but a bit stuck on adding the bevel modifier to the chocolate chip cube after bisecting it. Confirmed there’s no missing sides (not selecting all before bisecting), no tiny triangles or other polygons (all decently sized cuts), but the bevel modifier does not seem to have any noticable effect, even after modifying the normals to auto smooth at 180 degrees. I’m using Blender 3.3.1. Any thoughts why I’m not seeing the bevel?
Nevermind, found a solution: The problem was I probably had some points that were too close together. The fix is to go into edit mode, and press M, then “By Distance”. This will merge the nearby points. I had to drag the slider up a bit before the bevel modifier became visible. Searching the problem revealed the bevel modifier will not overlap with itself so the cause was having points too close to eachother somewhere. I also noticed when using the normals overlay my entire chocolate chip was red and not blue so I flipped the normals. Hope this helps someone else who runs into a similar issue. That step where the author moves the points away from each other after bisecting has much more importance than it seems.
@@eccentric-j thank you so much, i was stuck at this
for some reason the bevel modifier doesnt do anything to my chocolate chips when I apply them. have I missed something?
Sorry for the late answer, but I got the same problem: it's problem with topology of chocolate piece, try to cut it with bisect tool and not leaving small faces
@@jackposey6131 Thank you for your answer ! I'm glad to see I'm not the only one ^^
On edit mode, select all vertices or the ones that are too close together and press M, then select "By Distance", on the down left corner you should have a menu where you can increase the distance from which they merge, if the bevel modifier still doesn't do anything increase it until it starts to take effect
@@Aimeri- life saver
The whole tutorial is very useful but the most important thing was the rendering part for me. You skipped too quick, but thanks.
slow down i cant do anything right
You gotta slow it down bruh!
I was looking how to make that candy and watched other videos before I found this. This is super easy, I watched how dude made this kinda candy he was literally doing math
I knew this is not that hard, thanks ❤️
in 1 minute you make a better way to a mug than others in 10 minutes :s
How to Show Keystrokes on Windows please?
Liked
Well done this is amazing!
All your tutorials are amazing.
Thank you!
That's is fireee i did the same one and it's🔥
nice explanation !
Thanks! It was helpful, after blender guru donut ! Maybe chocolate chips--> sprinkle metod would apply? hmm...
Thanks! I have a question, when I'm using ''S'' it doesn't scale the face I'm selecting, it's scaling all the geometry. What could ir be?
You're the best. Love your paid courses and tutorials.
Thank you! Glad you like my content and products :)
pls tutorial uv unwarpping
Sir plz make a course on simple character design....
I already have one :) polygonrunway.com/p/3d-characters-and-illustrations
@@polygonrunway yaa i have this one ! But i need more ,.....
Thanks man, this came out really well for me!
Please more detail about color material, lighting, and camera setup. please
Helllo i didint understand the last part was to fast xd bu i did it anyways good video
I learn a lot from these videos. Thank you so much!
Awesome!
when you model the cinnimon stick, is that 'single vert' command a plug-in? I don't see it in the Blender 3.1 version
it's in the "extra objects" addon (just activate it in the preferences)
@@polygonrunway Thank you so much! I had this problem too, and I didn't want to miss out on making a cinnamon stick.
ah but now the extrude won't work on it...
i don't know why, but if i press f nothing happens. What do i do?
not sure if you're still doing this tutorial or not, but I managed to figure this out by pressing Tab, selecting Edit Mode, and then pressing F
@@dia8937 thank you, atleast you solved it for me
Sir, if the coffee color is lost, how do I get it back? I'm so caught up in this:(
You're the best ! Thank you so much :)
I have a request , do you know how to make shortcut like you for the modifier CTRL 1(like subdivision or others). it doesn't work for me.
Thanks again ! 😁
👍👍👍👍👍👍👍👍👍👍👍👍👍
how did make the cnavas at the end and make them baked ??
I have been using blender for 2 years and you literally taught me so much with one video that would have made so many of my projects easier LMAO you’re awesome thank you
Happy to help! Keep it up :)
Thank you!
Nice Tutorial Thank you
Excellent Tutorial. Thanks.
Is it necessary to use sun light for animation?
Is this Blender 3? (About to start this tutorial now, just wondering if I need Blender 3 before I start.)
No you don't. But if you have 3.0 it doesnt matter, works the same :)
If I get the Course now while it's on sale will I be able to access it at any time or will it time out?
It's not limited at the moment, but I can't guarantee any exact date
I leave a like on all these videos. :D
again, amazing tutorial!!! love this!!!
Nice explanation!!Thankx
Glad you like it! :)
Good !
Very GOOD!!!
Thanks!
This works on blender 3.0 right?
Yes, absolutely :) Almost no difference at all
Amazing 😍😍
oppppppppppppppppp mooble
nice!! now is using 3.0 or 2.93 verison?
This one was 2.93
Thanks!
Thank you!
wow 😮
'🙌👏👏👏
🔥🔥🔥🙌🙌🙌
Beautiful tutorial 👌
Thank you!
If you want to create a tutorial then you need to speak with the purpose to teach. You sound like you are talking to your friend and/or teach the material to yourself.
Good, but try to make something more realistic. Like a tree, or bread
I'm mostly doing stylized designs :)