Decision 2020: New SPIKE Brewing Conical fermenter - CF5 CF10 CF15 | RGR Craft podcast | Home Brew

Поділитися
Вставка
  • Опубліковано 7 жов 2024

КОМЕНТАРІ • 19

  • @RGRCraft
    @RGRCraft  4 роки тому +3

    2020 may be the year of the homebrewer! What you do think of my decision to move to the Spike Conical fermenter?

    • @SpikeBrewing
      @SpikeBrewing 4 роки тому +3

      Love it!!

    • @RGRCraft
      @RGRCraft  4 роки тому

      Cheers! Will have more comin on the CF5

    • @asdfate1
      @asdfate1 4 роки тому

      The Spike vs SS choice wasn't terribly clear to me. The things you listed are available in the SS as well, unless I'm confused. I'm not an SS apologist (I'm from WI and I hate CA, so there are two reasons for me to go with Spike), but I'd like to see any differences in capability and limitations.

    • @ericveilleux9401
      @ericveilleux9401 4 роки тому +1

      Really interested to follow your work with this baby. I'm checking it for a while. Tanks for the feed

    • @RGRCraft
      @RGRCraft  4 роки тому +2

      @@ericveilleux9401 Cheers Eric. Will be fun!

  • @jonmccombs1711
    @jonmccombs1711 3 роки тому +1

    Great job! I just bought a CF5 and setup it up. I got it with the manifold as well and cooling coil. I am very excited about the next posts to really see how to maximize my investment. I brew Kolsch 6 times a year and 6 other brews that interest me. Cleaning it was a breeze. I will pump directly from kettle into fermenter and use the cooling coil to cool wort to yeast temp. My kettle has the spike steam hat to keep moisture down while I brew inside. Getting everything dialed in has been a challenge dealing with losses in tubing, values, pumps etc. I am pumped to see the next posts,

    • @RGRCraft
      @RGRCraft  3 роки тому

      Congrats!! Would love to hear about the steam lid. Wanna dm me on instagram @rgrcraft_ryan ?

    • @jonmccombs1711
      @jonmccombs1711 3 роки тому

      @@RGRCraft The steam kid fit great on Gas-One kettle during entire brew cycle doing exactly what it was supposed to do. But during CIP it leaked like a sub with open windows. The lid has a flat lip while the kettle is rounded. So I reached out to Spike and they said I could get 15% one of their kettles. Not exactly what I wanted so I am trying a little keg lube on flat lip to see if that helps. I even tried using the spike unitank lid clamp but it was to short to go around kettle and clamp shut. Spike does not sell the clamp so I can't order one for a larger pot to try.

    • @RGRCraft
      @RGRCraft  3 роки тому +1

      @@jonmccombs1711 what about trying one of their fermenter lid gaskets?

    • @jonmccombs1711
      @jonmccombs1711 3 роки тому

      @@RGRCraft great suggestion it fit the steam and should be better than metal on metal. I will order one and get back to you. Thanks again!

  • @bevoburn
    @bevoburn 2 роки тому +2

    This is my decision 2022 between a CF5 or CF10. I mostly do 5-6 gallon batches of beer but sometimes i'll do a 10-12 gallon batches. Im just concerned about the amount of headspace on a 5 gallon batch in the CF10 would negatively affect the beer. I cant seem to figure out if pressure brewing would mitigate any negative effects of large headspace or even if if the headspace issue is not to be concerned about. So many questions....

    • @RGRCraft
      @RGRCraft  2 роки тому

      I find the pressure does have an effect

  • @silveraven1
    @silveraven1 3 роки тому +1

    Really great video, you covered everything I was thinking about. Still can’t make the decision between Spike and SS

    • @RGRCraft
      @RGRCraft  3 роки тому

      Cheers Brent. I will say that I have been very happy with the Spike. it hlds up great and I haven't had any issues

  • @diverbob33
    @diverbob33 4 роки тому

    Hey Ryan, nice intro to some of the Spike product line. In short, I am planning on opening a small (nano) scale brewery as an extension of my homebrewing hobby (as if we haven't heard that story before). Anyway, I just ordered my first Spike system as well (a 5 gal. Flex). It looks like I am about 6 or 7 months behind you but I think we're pretty much on the same path? Please keep these videos coming and maybe we can collaborate in the future. Cheers!

    • @RGRCraft
      @RGRCraft  4 роки тому

      Cheers Bob. It definitely does sound like we're walking the same path. I'm just not brave enough to open up a brewery though 😜. More power to you!! Certainly open to collaborating. Where are you opening up?

  • @crakalakin81
    @crakalakin81 4 роки тому

    That looks bad ass man. I know you’re excited. Very clean, studio too. Did I miss you say what’s the first style or batch to be made. Recommend beer for Sunday?

    • @RGRCraft
      @RGRCraft  4 роки тому

      cold = Porter/Stout. works for me