I have a 2006 Chevy Colorado and I used your link in the description to buy the part. When I put in a 2006 Colorado, it shows that the part isn't compatible and says to buy a different one, 214-1680. This is also confirmed on Rockauto. Not sure what happened but I just wanted to put this out there. Thanks for the video. Edit; I actually replaced it a few months ago using the part number mentioned in the video. I see what he did, he showed the actual part without all the extra stuff so it's quite a bit cheaper. They updated something on it for the Colorado but the bigger trucks still use the one in the video. I had the same issue as he did in the video, the split down the side from condensation freezing in it, and I swapped it out. Wasn't a lot to it except the rust under the truck. Light hasn't gone off yet but I haven't checked it for any other codes. Again, thanks for the video.
What shows the part isn’t compatible? An online order form ? Edit , so I just checked his part and your part number for my 05 Colorado and neither of them show compatible. His title is likely correct that this is the procedure for a 04-12 Colorado but as far as the part number goes maybe it doesn’t apply to all years.
@@georgiabigfoot I wasn't saying he was incorrect, I was letting people know that they shouldn't just go buy that part number because it doesn't seem to work for all Colorado's in that range.
The part 214-1680 that you mentioned is a purge solenoid, not the vent solenoid shown in this video, but you're right, Amazon says that the 214-2149 solenoid ($26) from this video doesn't fit. It's meant for a Silverado, Sierra, Yukon etc. The 2004-2012 Canyon and Colorados call for 214-2241 (or 20907779) which is a mostly identical solenoid with a hose attached. This guy's video shows you how to attach your old hose and make the cheaper part work to save $100.
Great vid, got 171,500 on my 05. Haven’t had replace mine yet but great idea to just unscrew bolt and let canister hang while replacing the vent valve, this will be my go to vid when it happens, watched a bunch of vids on this fix and they always pull all the the lines, ur way is much quicker simpler, thanks for posting,hopefully u will show ur rocker panel fix, mine is shot too
Thanks for the link. I’ve had this replaced 3 yrs in a row as soon as weather warms up for a day and then goes back to freezing the light comes on. Just in time for inspection. It’s getting expensive $300 each time. I can do this myself. That part the same on a 2010 LT 3.7L ?
Have your system smoke tested at a shop. It could be several different leaks in the fuel system. Fuel pump steel capture ring rusts out. Fuel filler neck can rust out. Steel lines going up front also. Gas cap gasket can go bad too.
Thank you so much for this video I bought a 2008 Colorado with a check engine light on it was P0449 your video gave me the knowlege and confidence to do the job myself . I probably saved a ton of Ca$h. Thank You so much !!!!!!
Thanks for the savings! Just got mine on today, using a heat gun helped get that hose onto the new solenoid. Did your CEL go away on its own or do I need to clear it? Edit: I did not clear it, and it went away on its own after 3-4 10 minute errands (6-8 drives)
Awesome video! I did have one question, do you know what the actual name for the 3/8th hose that attaches to the actual canister is? I was replacing the whole canister and the plastic on that one was incredibly brittle but I can’t find a new part anywhere.
Hey man thanks for the video . I went to your link for the part but Amazon says it doesn't fit my 04 Colorado? It seemed to work for you so I should have no worries you think?
Thanks! I think mine said it was for an H3 Hummer, so yeah, it should work. The part number should be on the top of it if you want to check to make sure.
I have a 2006 Chevy Colorado and I used your link in the description to buy the part. When I put in a 2006 Colorado, it shows that the part isn't compatible and says to buy a different one, 214-1680. This is also confirmed on Rockauto. Not sure what happened but I just wanted to put this out there. Thanks for the video.
Edit; I actually replaced it a few months ago using the part number mentioned in the video. I see what he did, he showed the actual part without all the extra stuff so it's quite a bit cheaper. They updated something on it for the Colorado but the bigger trucks still use the one in the video. I had the same issue as he did in the video, the split down the side from condensation freezing in it, and I swapped it out. Wasn't a lot to it except the rust under the truck. Light hasn't gone off yet but I haven't checked it for any other codes. Again, thanks for the video.
What shows the part isn’t compatible? An online order form ? Edit , so I just checked his part and your part number for my 05 Colorado and neither of them show compatible. His title is likely correct that this is the procedure for a 04-12 Colorado but as far as the part number goes maybe it doesn’t apply to all years.
@@georgiabigfoot I wasn't saying he was incorrect, I was letting people know that they shouldn't just go buy that part number because it doesn't seem to work for all Colorado's in that range.
@@hjsn1 ok very good, I’m going to pull the bad one on my 05 and see what part number it has on it. Thanks for the clarification.
The part 214-1680 that you mentioned is a purge solenoid, not the vent solenoid shown in this video, but you're right, Amazon says that the 214-2149 solenoid ($26) from this video doesn't fit. It's meant for a Silverado, Sierra, Yukon etc. The 2004-2012 Canyon and Colorados call for 214-2241 (or 20907779) which is a mostly identical solenoid with a hose attached. This guy's video shows you how to attach your old hose and make the cheaper part work to save $100.
@@hjsn1 I have a 2007 colorado and I bought the product he linked. It does not fit my truck. The electrical connector is a different type.
Is this the same part for 06 canyon with the five cylinder.
Great vid, got 171,500 on my 05. Haven’t had replace mine yet but great idea to just unscrew bolt and let canister hang while replacing the vent valve, this will be my go to vid when it happens, watched a bunch of vids on this fix and they always pull all the the lines, ur way is much quicker simpler, thanks for posting,hopefully u will show ur rocker panel fix, mine is shot too
Thanks! So glad it was helpful!
Thanks for the link. I’ve had this replaced 3 yrs in a row as soon as weather warms up for a day and then goes back to freezing the light comes on. Just in time for inspection. It’s getting expensive $300 each time. I can do this myself.
That part the same on a 2010 LT 3.7L ?
Good information on the repair and saving money on the replacement part. I also put power to the wires to make sure there was no clicking
Hi there, I replaced a new canister but the check engine light still show P0449. What should I check next?
Have your system smoke tested at a shop. It could be several different leaks in the fuel system. Fuel pump steel capture ring rusts out. Fuel filler neck can rust out. Steel lines going up front also. Gas cap gasket can go bad too.
Thank you so much for this video I bought a 2008 Colorado with a check engine light on it was P0449 your video gave me the knowlege and confidence to do the job myself . I probably saved a ton of Ca$h. Thank You so much !!!!!!
Did you have to replace the harness to that solenoid?
Thanks for the savings! Just got mine on today, using a heat gun helped get that hose onto the new solenoid. Did your CEL go away on its own or do I need to clear it? Edit: I did not clear it, and it went away on its own after 3-4 10 minute errands (6-8 drives)
Ow ya the end clip coming soon and a shot of gramps can’t wait!!
Thanks for watching to the end! 🤘🏻
Awesome video! I did have one question, do you know what the actual name for the 3/8th hose that attaches to the actual canister is? I was replacing the whole canister and the plastic on that one was incredibly brittle but I can’t find a new part anywhere.
Did you just use a rubber hose?
Thanks. you video help me a lot
Hey man thanks for the video . I went to your link for the part but Amazon says it doesn't fit my 04 Colorado? It seemed to work for you so I should have no worries you think?
Thanks! I think mine said it was for an H3 Hummer, so yeah, it should work. The part number should be on the top of it if you want to check to make sure.
Where did auto detour go?
Thank you sir for this video. Aloha
Thank you for the video, but you didn’t address the wiring connections or the need to change or not change the harness.
WOuld've been nice to see some troubleshooting, although that solenoid was clearly FUBAR. Mine looked OK but threw a code.
Thanks
I need one of them solenoids
Hello. Does your Colorado have the 2.9l engine?
Yeah I like the video it was great I think I can put mine on thank you
I think that the product in those boxes are not genuine GM parts
Thank you buddy. This was a big help!
Glad I could help!
was going to thumb up but the price was way more then 16