How to fix non-working keys with a pencil for free
Вставка
- Опубліковано 26 сер 2024
- How to fix M-Audio Oxygen (and all other digital keyboards) non-working keys with a pencil for free.
If this saved your old keyboard please support my work with a donation on my PayPal! Thanks
paypal.me/mich...
If any key on your keyboard does not work or does not respond correctly to your fingertips, you should do the following:
1) Remove knobs and sliders, open the keyboard, remove plastic buttons, and gently remove rubber strips on electric board;
2) With a pencil gently colors the contacts of the sensors located beneath the rubber strips;
3) Replace the rubber strips on the contacts, reset the plastic buttons, close the keyboard and retrieve knobs and faders;
4) Enjoy it and please like this video! ;)
I tried to fix dead keys for two days without success...I resorted to onlone help...I found a very good advise.I used the pencil and all problems were solved in few minutes.Thanks a lot
You're a sinner perhaps🙄😁😂
Just throwing my cents here: The pencil fix can work fine, but if a key is dead, always clean the contact first with circuit-friendly cleaning fluid, then reassemble and give it a try. Sometimes it's a thin layer of dirt what's causing the faulty connection. Adding a coat of pencil graphite can fix the problem temporarily, but that thin coat will wear out eventually.
Hi......Which Fluid can that be please coz some times using a pencil is short lived. and I wanted a parmanent solution or atleast for a long time. thanks you in advance
@@lamijerald2364Isopropyl alcohol is good for cleaning any circuit without damaging anything
@lamijerald2364 I'm gonna try buying a new contact board, which is what the rubber pads press down into. Not sure if there is a more permanent solution other than that but I'm sure you could use some other material thats more longer lasting but i just have no idea. Maybe $50 buy a new contact board compared to $2500 for a new keyboard in my case.
@@lamijerald2364also the curcuit friendly fluid he's talking about is simply called electronics cleaner. Wd 40 makes some that us meant to be used on sensitive computer parts like mother boards and contact boards to clean them.
This technique is works 75%, I just tried it I want to give one my personal experience if ure key is not working after the pencil use then use erase o same key it will 100% works. Thanku🙂
What is erase o?
@@stephenonyango6912 ... maybe he’s talking the pencil eraser?
What erase o
@@stephenonyango6912 eraser* on*
Thats what probably he meant.
Some more tips. So on my keyboard, 3 keys went dead. Cleaning the landing pads and swapping the rubber membrane did not cure the problem. Looking at the circuit board, I noted that keys are wired in groups. Although the three keys were not next to each other, they were in fact part of a group. So I traced the fault to a break in the PCB track. I fixed this with a bit of soldering and the dead keys are now alive! However, all three now play louder than any others. This cannot be due to their membranes, as it is not common to all three keys. So I have more work to do!
After searching the internet for a couple days trying to fix dead keys. Cleaning didn’t work and I noticed the missing connection. I just happened to come across this video. Thinking to myself, this is a load of crap since you never showed the keys not working in the beginning. Decided to give it a try anyways, and it freaking worked. Thanks 😃
I've done so many times for decades it's not permanent but sometime last for about a year. Worth some tries as it pose no harm..
I would recommend simply rubbing the contacts with a cotton swab moistened with distilled water to minimize residue (I used the water condensed under the lid of an electric kettle). This fixed 2 non-working keys, and I did the whole keyboard to prevent similar occurrences in the future.
I've seen a few videos like this, but it works better if you clean the contacts on the PCB board, and then apply graphite to the carbon contact in the the rubber strip
Thanks for saving my Yamaha Keyboard. I tried taking it apart cleaning it everything it just kept getting worse. I was thinking it was going to the garbage can but then I found this video tried it and it fixed all of my dead keys. Plays 100% now thank you so much again. Also I dropped a cup of coffee on my keyboard that's what screwed it up and it still work
Какое полное название у вашей модели?
I did this as well. The problem is its easy to short out the contacts with graphite "haze" on the non-contact portions. My fix was to go over it after with a Qi-tip and a lighted magnifier to find the shorts. Worked great! NOW my issue is that one Bb ALSO plays the # above it every time! GRRRRR
Thank you so much Man. You saved my piano of 8 years.
Fixed my Yamaha mm6 today ,
The 3rd. D key had poor contact ,
Took everything apart use the Pencil technique on the contract .
Put it all back together !!!!
Works beautifully !
Thanks !!!
Thank you very much! It worked on my Korg SP-170DX which was dead for 2 years, what I did was scrape a lot of the lead off the pencil and emboss the contacts with it
I know this video is old but for anyone with loud keys this also works. I had lost hope until i found this video and figured i would give it a try and it worked. Thank you brother 🙏.
It didnt work for me
@@raudel101same here
I fixed the same issue with my CTK 3000. Here is the quick fix, you need: 1. Interest in technology (to open the casio) 2. Simple Pensil Eraser.
I rubbed the same surface area with rubber and the rubber sucked the entire black dust and now it is working just like before 💯
This video was so much more helpful than anything else I've found on the internet. Thank you!
I wanted to give an update that it has been two months of heavy playing and my keyboard is still working perfectly after using the Pencil Trick. After spilling some coffee I had a dead key and the more I tried to clean it more the problem spread until I had about 10 dead keys
Thanks so much for this, in a few minutes my dead keys are working perfectly. Am subscribed and have shared to all keyboardists i know. God bless you
This really worked!!! At first it didn’t but after wiping the excess pencil off the sensor it works
Thank you sooo much! I had an old Casio 671 keyboard, not in use fo rmany years. The keys were working fine, but the buttons, that you need to use to select t he sounds or rhythms were not reacting, when pushing them. Also the on/off button did not work most of the time. After cleaning the "contacts" with alcohol and additionally applying some pencil on them it works now like it is a new keyboard!!! Can't thank you enough :) Now my kids can use my old keyboard to practise music
OMG 10 years broken roland ep 9 revived thanks to this video!!!
I was so hesitant to try this... but after hours of cleaning and tinkering with the sensors I finally tried this AND IT WORKED!!!! THANK YOU! I did this on my Korg Kross 88-key Workstation to fix two keys that were stuck at full volume. Thank you again.
Seems like a common kross 88 issue. Gonna do the same to mine. How's yours holding up?
@@jaimemontero6712 after a year or so one of the keys started to mess up again, but all in all the fix has really held!
Worked like magic … this tutorial is gold
I can't thank you enough man. Can't believe the fix was that simple! Liked saved and subscribed!
man, you've just save me a lot of money... thank you so much.
Does it matter if the pencil is not charcoal? I mean my pencil is made from graphite.
I think there is a special graphite glue pen you can buy for this...i forget what they are called.
Great video.
DUDE YOU ROCK - pencilled in all the contacts on my old boss dr 5 and now its barly a finger touch to change it unlike before when u you had to press so hard - thank you so much from NZ
Worked awesome, Thanks.
Fixed all but one of the middle keys, and the 6 on the end. Thinking the last 6 have a blown resistor.
This is so amazing thank the Lord for you this really works!!!
Thank you So much Michele ..It worked for me like a miracle .. an almost dead key Worked in seconds God Bless You
this is indeed LEGIT! thank you so much for this vid! you got a new sub 👌
Awesome😁👍It worked perfectly with my old Yamaha S80RDS remote control (Home Cinema)! 👍👍👍Saved me at least £60 - yes! that's the price on ebay for used one 👎How long this method last for??? Anyone knows?
I really like watching your video 😘👍👍👍💯
YOU ARE AMAZING!??!! 😱😱😱😍THANK you so muchhh for this amazing advice , I had problem with three keys ..those I solved just by simple cleaning, but one last key was still not working until I tried this 😱😱
THANK YOU SO MUCH! I can't believe it worked!
This works because graphite (a conductor) helps the key contact with the sensor (I hope I'm correct)
You are genius. Thank you.
It worked perfectly for my Yamaha psr 79
thanks a lot, your very good demonstration helped so good , an old keyboard rRoland KR-75 works again , John in France
attempted this,but sadly my keyboard just got some extras dead keys.Before,one key wasn’t playing,but then,some 4 more started not playing.Now I can see the input of some,but they dont release and doesn’t make sounds
I had that problem. Mine was because the board was corroded from soda. Clean between the solder traces with alcohol and a cotton swab, then scratch the junk out from between connecting solder points with a file or your nail. I even washed it in the sink with dish soap and dried it before putting it back in.
Thank you,you save my non electronic piano
I Once saw him in a Bar Fixing 3 Piano Keys...With a Pencil... a Flipping Pencil.
My keyboard (CASIO ctk 731) , display board ok, but keys r not working.This instrument is kept unused for last one year.... how to repair it,pl.suggest...
Thank you for sharing your knowledge
Worked on my Alesis V49. Thank you X1million
yes its working but not a permanent solution and also its effect on key touch sensivity .. some keys touch sense are not working properly
OMG I thought it wouldn't work but it does !! Thank you 😊
First of all I would like to say thank you! I´ve got the same problem with my sk-560 54 key keyboard , I will try to do that!! Thanks a lot :)
I repair musical keyboards and remote controls and I use 6B pencil and i have no problem at all.
Good job! CONGRATULATIONS! 😍❤️💯👏
Tried this and it did NOT work at all. I'm now going to try to remove the entire circuit board and then re-solder points? I have an extensive science background. This worked on the circuit board on my 98 Chev. PU. wiper control motor.
D7de just replace the contact strips lmao
Thanks. This really works.👍Almost hslf of my keybord keys are not working previously. Now only two keys r not working well. I think its because of the rubber beneath the keys need to be renewed. Btw thanks a lot.
Thank you so much!!! this method worked on my Yamaha psr e263
hello is this really good to try8???
yes it is completly safe to try, it will work for you too...
@@kishorenikam9919 I have a Yamaha pd 123 have two not working
Worked for me too! Thanks.
(tho' putting back a Korg M50-88 together was a pain)
I fixed 2 keys of my old Fatar SL-880 (20 years) with a graphite pencil 4B. Thx
Thanks for the instruction
thanks you
First , I fixed my LCD of Roland e09 keyboard when searched on UA-cam.secondly I m going to fix 2 black keys on my Casio ctk5000. Some suggested me to apply very thin silver conducting grease over it . But first I will try your method.
As for me have tried that but it is not working so I notes that two line of carbon is broken so how do I fix broken carbon
Brilliant. Thanks a millions.
You just might have saved this guitar player a lot of heartache fixing this thrown away p 35b Yamaha
are you using a specific pencil? My Oxygen 88 has the "loud key" issue
@SunTai thanks for the reply. that Oxygen 88 is long gone now.
Either old conductive rubber from some old remote control, or a new conductive glue layer will help here instead of buying a new rubber.
Blessing I really thank u for ur video it really help me thanks again God bless u
thanks man you help me a lot. keep it up,,,,👍
What kind of pencil, HB or 2B? Thx
Does the pencil and the drawing on the board have to look deep?
thank for for saving may keyboard😄
Thanks for sharing! It worked on my keyboard!
Wonderful trick... thank you!!
Thank you so much for sharing this stay blessed ❤🙂👍
This was helpful Thanks alot.
thanks for the video, you're using 2B pencil right ?
Fixed 5 dead keys thank you
Thanks! Actually work.
Have to try that now I did the alcohol and Q tip thing.... Helped a bit but still have some dead keys...
IT WORKED! OMG!
And how to solve if they work ,but in différent fréquency velocity (inconsciency) and sometimes yes sometimes no!
i used this technic but few dead keys is now over react and also some keys is still not working so tell me fix it anotherway please 🙏🏻
Nice Bro .... thank you so much for posting this vedio
OMg! Thank you for this.. liked and subscribed my friend!
What model Korg is this? I have a Korg pa4x and the G above middle C is playing way louder than other notes. I’m trying to figure out how to fix it.
Same is happening to my B1 Korg. Some notes sound much louder and occasionally one note will play a really loud while i'm playing other notes.
Oh mahn, I thought this would be a joke, but I was wrong it actually worked.
Great
🌹🌹🌹🌹🌹🌹🌹
💚 💛 ❤ 💙 💜
Greetings From Super Extremes- Sri Lanka
💚 💛 ❤ 💙 💜
3 keys too loud on technics kn6000...how do I fix this...
thank you!! tried it on nord electro 5hp and it worked!!
Thank you so much!
It works... Thank you so much
I have one questions? So when a key it doesnt sound i just have to clean it?
wow, it worked, thanks
Thanks a ton. It worked.
Hi there. You'll never believe it, but I had two keys on my old Roland W30 that didn't work, so what I did was to take a piece of cardboard, curl it a bit with bending, then insert it between the keys (to the left of the key that wasn't working) , then I dragged the cardboard slowly up and down (dragging it towards me worked the best) while repeatedly pressing the key, until I heard the sound of the note come back. I did this to two non working keys (separated by an octave) , and they both came back and are working fine. Maybe there was dust or cat hairs under there ? or loose wires, I don't know. What do you think? I'd be curious to know.
Thank you very much
genius ,it worked omg thank you so much!
From my experience, this is not a lasting fix. If youre going to all the trouble of taking it apart, you might want a more permanent solution. A little acetone on a qtip can sometimes work when scrubbed lightly across the contact on the bottom of the rubber bubble strip. The best fix is probably new contact bubble strips.
where can you get replacement bubble strips? Is it the bubble strip that causes the failure or the circuit board contact it presses on?
Sir in my Yamaha e463 keyboard some keys are not working.so i clean the dust from the keyboard still it is not working,so i remove the keys and press the rubber strip it working but after the keys are fixed ,again it is not working.i think some fault in key contact circuit.what shoud i do please give the solution
Hi! F- Sharp in the middle of the keyboard is not working as intended. When the key is pressed and released the note continues even after sometime and repeated pressing of the key does not result in repeated notes. Will this trick works ? Please help. My daughter has an exam coming up .. thanks
yo look competent ,i wonder if you can help me out, i bought a 76 key yamaha dgx200 when it arrived it had 2 broken black and 1 white keys i looked easy enough ,changed them myself, but when tried to play only about half the keys would play random ones over the whole keyboard , any ideas please
Thank you 🙏🏻
thanks man 😎
This is a workaround and does not work long-term.The contacts can also be completely damaged.The keyboard and rubbers must be cleaned with Isapropane alcohol.