How To Fiberglass Door Panels - Step By Step - Box Chevy Caprice - ALLKANDY WET WET / HOUSE OF KOLOR
Вставка
- Опубліковано 4 жов 2024
- Please watch my latest video here: "LS Swapped Box Chevy Caprice On 26s Build After Paint & Cut N Buff - Reinstalling Everything Back On"
• LS Swapped Box Chevy C...
-~-
Visit : spraywaycustom... for New & Used Spray Guns & Parts
Complete step by step process of fiberglassing Box Chevy Caprice custom door panels spraying House Of Kolor Kandy Voodoo Violet with Orion Silver as the Base Coat. I used the Wet Wet Plus / ALLKandy.com for my clear. I'm going with Kicker 6.5 in the door panels with a Chevy bowtie. Any questions feel free to ask....SprayWayCustoms
#CANDYPAINT #SPRAYWAYCUSTOMS #HOWTOFIBERGLASS
Base Coat: House Of Kolor - Orion Silver
Kandy Coat: House Of Kolor - Voodoo Violet
Clear Coat: ALLKANDY - Wet Wet Plus
Primer - Harbor Freight Gun
Base Coat - Satajet 3000 HVLP 1.3 tip
Kandy Coat - Satajet 3000 HVLP 1.3 tip
Clear Coat - Satajet 3000 B RP 1.3 tip
You can use the same process to:
fiberglass dash
fiberglass speaker box / sub box
fiberglass rear deck
fiberglass center console
fiberglass tweeter / speaker pods
fiberglass kick panels
fiberglass pillars
fiberglass bumper
fiberglass spoiler
fiberglass hood scoop
Endless possibilities - Авто та транспорт
Here's A Video Of Fiberglass Supplies To Get When Fiberglassing ua-cam.com/video/spw6BGPdjbg/v-deo.html
너도 다음은
Same here
Oh man, YOU ARE A GENIOUS, I know this is 5 years old, but how can a masterpiece like this ever becomes old! Thank you, maybe you don't know it but your videos and your humble attitude and hard work is an inspiration to many of us that are struggling and trying to find ourselves in this crazy world. I embrace you man you are a truly special person.
Semper Fi
Thanks man. You all are my inspiration as well
Thats a real talent you Have
Cool dude for sure.
After 15 minutes of watching I was thinking "what the crap is going on here." Then went to end to see the results, and then I went back and watched the entire video. Man this thing is awesome.
Craig Cole 🤣🤣🤣thanks
Okay first off can someone please give this guy a sponsorship!! Did you all just watch this video and see what he did in his garage by himself bare-bones as hell with products from Walmart!! This shit turned out a thousand times better than 99% of the stuff I've seen on UA-cam!! And he doesn't feel his video with a whole bunch of nonsensical blabbering and then yells and not knowing what he's talkin about or anything he's straight-to-the-point its in-depth and gives you everything you need as far as information so you can do this on your own!! This is the best video by far that I have seen in all my years of watching videos like this on UA-cam!! Somebody please give this man some major credit because he deserves it!! Great job bro turned out really amazing!! You spent more money on the paint supplies from House of Color then you did on everything to make the door panels LMFAO I love that shit!! Showing love from Milwaukee Wisconsin 414!!
Thanks for the big support
Bro I’m still watching these videos from five years ago man. God bless you bro taught me so much.
Thanks for the support Bruce
Why do I chuckle every time he calls us 'youtube' 😂
🤣🤣🤣
Same
I was thinking the same thing 🤣🤣
Me too 😜🤪😜🤪😝
Relatable
at the beginning of video I was thinking "wtf u doin?" the end result is amazing.Talent
yeah man I'm glad I stayed with this dude because it came out right as hell. Serious talent.
Exactly what I thought too. "No way this will ever look good. This is going to be some shit that he'll be the only one that thinks it looks good". I learned my lesson.
Exactly what I was thinking ... I was looking mighty foolish at the end.
Right? Me too.
When I saw him putting resin on the carpet I was thinking the same thing. But great results!
What amazes me is that he does it all with one hand so that he can show us the way. Hats off to you SprayWay! 💪🏾👍🏾
Thanks for the support
You are a master craftsman and a great teacher. I am sure people don't realize how much time and effort this takes. I dunno what you charge for a job like that, but it isn't enough! This style isn't my jam, but the ideas and the quality of work are very impressive. I'm going to do some dash and door panel work and I got some great ideas here to try on small pieces and work it out. Thanks.
Thanks for the support
I’m so impressed how this turned out. You started with a junk yard door panel and now it is a custom kandy work of art bro. Thanks for sharing the knowledge.
Thanks for supporting Chris
@@SprayWayCustoms Hey bro did you teach yourself to paint and do interior work
I went to trade school back in 1997 for Autobody And Paint but I learned more from watching UA-cam. I didn't start back fooling around with it until 2014
@@SprayWayCustoms you are nice and natural at what you do you and stitch by slick outta North Carolina are amazing keep up the good work I am inspired by you guys.
Wow! That was amazing! Sometimes even small custom parts cost a fortune, and you whip out this masterpiece like it was a piece of cake! Fine workmanship right there!
Appreciate you motley416
I just wanted to say, Thank you! About 3-3 1/2 years ago I watched your video. I commented that I was installing air ride and a system in a Chevy HHR. I had never attempted to try anything like this You commented back. I respected you took the time to reply. That inspired me...I can do this!! I thought??? Now, to why I say Thank You!
Little over 3 years now I went from a single car garage. To now a 10,000 sq. ft. shop. I learned fiberglass from your inspiration. From there taught my self how to weld and metal fab. Now building custom choppers and mini choppers. Thank You!
Congrats Patrick 🤝Thanks for the support
I admit it was taking me a minute to grasp what the end result was going to look like when you was about midway through. About 2 minutes later I started seeing it, I also seen how much work that it was gonna take as well. LoL. You stuck with it dude and didn't give up. You kept pushing forward and implementing new ideas on the way. Well you did it and dam knocked it out of the park! Great job man and keep following that creative gift, no room anymore for self doubt about your abilities. That ship passed long before you even got the fiberglass. LoL. Cheers!
Thanks for the great compliment Chad
BEAUTIFUL!! Nice work brother! I really appreciate your attention to detail and all the effort you put into showing us step by step! I know it's a hell of a lot easier to get it done without filming everything, so THANK YOU for sharing all of your work!! You're really talented!!!
Thank you so much Levi Olive
I just found your channel. I like how you show all the steps and processes in the job, even when it looks all crazy and you make changes on the fly, it can turn out beautiful. Some people don't realize how much work it takes to make a custom part from scratch. I used to build carbon fiber airplanes and we built all the interiors by hand, its definitely a labor of love working with composites. You do awesome work!
You're support is very much appreciated
I remember seeing this for the first time years ago, and im still blown away! You inspired me to experiment and get creative with my 92 Chevy silverado k2500. Thank you for sharing your knowledge with us as always man we appreciate it
That's awesome!
Watching again like it's my first time!!! And I still think this is the best thing ever, and the looped music hasn't bothered me once lol!!!
Thanks A Day Wit Jay 1
I promise this the second time I watched this video
Watchin for the second time too lol
Damn..this vid was like watching empire..just kept getting more interesting..even forwarded a couple calls just to finish watchin it..lot of essential step by step procedures easy to understand..u would make a good teacher bruh..305 need that work .
I appreciate that love
love your videos but that loop in the background.....damn!! SHHHHHHHH!!!!!!
Thanks Scott....
Thank YOU!! Really inspiring me to give it a shot. Pry start small. Hopefully it turns out, lol.
hi man i like your spirit always positive but tell as how the panel fit on the door
Scott King thanks
I love the instructions.
But drop the ur gonna love me crap. The loop drives me crazy.
Been watching your videos. You have no idea how much people are learning from your series.
Great to hear that Kyle
I fell asleep I've been watching all your vids and this song was haunting my sleep dear God please make it stop. other than that, you've got one helluva skill level man!
You should make a video of how to fabricate your own middle console and fiberglass it. I'm sure you would come up with something amazing because your work is very good I like your videos you truly show step by step 👍
iwas like this guys nuts lmfao... than the end im like brooo i wish I was like this dude lmfao
Lol 😂 thanks Wes
He takes pride in his workmanship.
Thanks Sam
I’ve never seen that kind of painted door panel before. I’m blown away. You are so talented man.
Thanks Scott. I really do appreciate you
I've watched a lot of FG videos and this the only one that made me fully understand this thing. Bro you gifted.
The end result is absolutely amazing.
Keep it up bro.
Thanks Kyle
I couldn't take that repetitive music. You do great work... I just couldn't watch the video due to the music.
Thanks for trying 😂
That Is Above Proffessional Work. U R An Absolute Genius. When I First Started Watching U Cut Up That Door I Had No Idea That It Would Be Such A Fabulously Beautiful Work Of Art. U R Indeed An Impeccable Craftsman.
I really appreciate the major support Jimmy
Brother, when I watched this in the beginning, I was like “Wha Tha heck !?” But dude, you are the man!!! There is a method to your madness lol. Amazing job!!!
🤣🤣lol....I would've thought the same thing...thanks man
SprayWayCustoms lol my pleasure
I think House of Kolor or other companies should be lucky to be sponsoring you. You do great work
Thanks 🙏🏾 Dick Jokes And Bondo
That panel went from woa! to bad ass..Serious creativity there..
Thanks...DW...How's that foot feeling?
Hurt like hell both of them.. i dont take pain meds and surgery wont bee for a week or so..keep up the good work..
Thanks...I hope everything goes well for you.
SprayWayCustoms thanks..
Beautiful work! I like how you take the extra time to get everything perfect. I'm fixin to do my own door panels, and I've learned more from your videos than any others. Thanks for the detailed videos.
Thanks for watching Wicked Evil Bass
Video is the best for a beginner to watch and learn like myself on UA-cam.
Great. Thanks Rod
My ears got some relief when "I got em" came out 😊
😂😂lol
love the turn out keep up the good work
the only annoying part of this video is hearing "your gona love me" over and over for 1Hour :06 Min :24 Sec :p
Amazing work but that song was annoying
Ughhh that loop is so annoying. Good work tho!!!👍
Aw man, y'all must not know bout Jennifer Holliday. I could listen to that loop all day and still feel it "And I am telling you I'm not going" Love it SprayWay
Thank you for being yourself sir and keeping it 100. You're the best of the best in your category thank you for sharing the knowledge
Thanks Rogerio. Very much appreciated
I remember when I first checked out your channel, never disappointed me. Salute!!!
Thanks a lot man
Nice work and you are inspiring others to try it. Good job!
You made me a kandy fan! Now I want my car black and yellow in all kandy! Amazing job! You are an artist! That music on loop killed me. But how you went over everything step by step was worth watching. Going to start small and do a sub box build with Steelers incorporated into it. Kinda like the Chevy sign you did. Keep up the amazing work my friend.
Thanks man....I'll make sure next time I don't loop the music..lol
this had been a pleasure to watch great how to video my brother spraywaycustoms
Thanks for the support bro
You can tell from this man's demeanor he deserves respect and gives respect a man with a lot of patience...🏁🏁🏁
Thanks a lot
Unreal!! You have talent brother.. music drove me nuts but the way that turned out! Wow!
I gotta get that paint and color man. I was already thinking of going with a purple on my car, this color just sealed it for me. I'm definitely going with purple.
Geniuses always have a flaw that’s when I come in, duck tape that camera 🎥 to a hard hat. Nice work G.
🤣🤣Thanks Zello King
@@SprayWayCustoms what u charge for the fiberglass panels
I'm glad your doing this! Most hood dudes don't have the confidence to do anything but stand on a corner.
Thanks for the support Matt
you've inspired me to go and buy all the stuff I needed. about to start my first job. ima post pictures probably for my first go. maybe u can check them out sometime. would be the work or your apprentice. I've watched pretty much all your videos. everything is clean af. don't listen to what no hater got to say on here. names chunk. showing some love from Florida.
hit da flo. here we is boooiiiiiii.
you started yet ?
Sakima King I got the rings cut out. that's it.
gotta start somewhere . good luck
Man, I swear, defund Hollywood and fund this kind'a stuff. Seriously.
Thanks 🙏🏾
Or hire these types of folk to work on set designs and stuff!
@@manniefresh7354 , Hollywood wants fast and cheap.....so I doubt he would fit their requirements.
Sweet door panel! I might try this on my truck. I need a arm rest.
Bruh your talent is worth more than diamonds man. Awesome job
Appreciate that
We'd like to see it installed at the door.
was hoping to see it in the car for sure.. man I bet it looks good!
Right i said the same thing two year after you did
Dayum man... that's a beautiful paint job. Nice work. There's no substitute for taking your time and putting in the effort. Subscribed.
Troy, I appreciate you subscribing and the inspiring compliment...yes patience is a must
Yo bro you got straight skills! Good job wish u lived close to me so I could hire you to do some work for me . If you dont already have your own business you definitely got the skills to be successful. Your going to be a very successful business owner. Great job again!
Thanks for the support Mexican American
Bruh, there will always be haters but I didn't expect to see 486 haters. Keep up the great work. That's real art and innovation, sir! God bless!
Thanks, as long as the supporters out weighs the non supporters....I'm doing just fine 🤝
@@SprayWayCustoms , I have rebuilt door panels and made subwoofer enclosure with fiberglass before. That's not easy work. It takes a l ot if hours to do build at a level like yours.
I wish I lived close by because we would be taking over. I have ideas but your craftsmanship is unrivaled.
Yes! Your getting some serious love on YT because of this video and you deserve every bit of it! You got some natural talent bro and I'm honestly fuggin jealous! That door panel turned out with the quality of a high dollar custom car Fab. You will definitely make a name for yourself if you stick with it. And UA-cam if a great place to be for you. Twenty five years ago you'd be an awesome body and paint guy but with yt I think you could make yourself WELL KNOWN with the skills you show here. Keep it up, and next time you're in Austin Texas... I need some help with some door panels bro.. lol. I'd let you work on my shit anytime, and I only let myself work on my cars! Good luck!.
Oh yeah who was that last song by? I laughed at it then next thing I knew I was bobbing my head! Lol. Thanks again man.
Thanks for the support Tony. The last song was called Blinded by Jackie Chain
You have amazing vision! I had a hard time seeing that chopped-up panel becoming the finished product. :-)
BTW: Try using epoxy resin (used for countertops) instead of repeated attempts in using bondo fillers and sanding. It will save you time and effort while simplifying the process and materials list, and will result in a very high gloss finish! Thanks for the amazing video!
Thanks for the info Phill
Damn, that paint looks 10 feet deep!
Thanks for watching Ron Cosby
Man I used to watch all those shows on discovery channel but who need all that when I can follow you and learn from the best
Thanks for being you and the lessons
No problem... thanks Rafael
Okay UA-cam
okay paco
you gonna love meeeeeeeeee!!!! yaaa!!! ugh uhh ugh uhh
this buy far is one of the best doortrim video's on youtube...bar the crappy background music. swap the songs around ppplllllzzzzzz (the last song was good 👌)
nice work man! do you have a video of the finished car!
Hands down the best painting vid I've seen on YT! Just insane skills....
Thanks Jesse
"COME and LOVE Me aaaa em em em em"
one hour and 5 min and the same lyric keep repeating!
how can i get it out of my head now !
No More Music MAN! .Sounded like a broken record.🤦♂️
Still great work tho👍.. Respect from California.
😊😂😂
You're gonna love me ahhh mhhmmmm
You ooo ooo ooo oo!
Gangsta grizels
I thought I was trippin or left my phone playin some shit
Good videos....
But yeah, that back ground music got irritating, real quick!
I know these not new videos, but ive started my whole interior because of you.. Thanks for these videos!!!
Thanks Darnel
Go check out my latest fiberglass video. ua-cam.com/video/v1dtUR0TznE/v-deo.html
SprayWayCustoms do you have social media?I got a question about making a mold of fiber glass to repair one side of my car that was dented in quite a bit
To hell with who got negative to say homie that's some nice ass work you on point, I have 1996 Cadillac Fleetwood getting painted that same color keep doing what you do keep them hatin.
Love your videos.. mmhhhhmm....lol...
Im a experience wood worker and decided to build some custom solid wood door panels..its not done yet but my shit looking elegant and sporty like a classic Ferrari at the same time....i know its not the best car to build on but its a part of our family and driven daily my 1988 9c1 Given to my dad as retirement gift brand new custom build specially for him as he was 7.1 tall...thinner bench seat works for me 2 ...when im done i want show it off ...all walnut special select...sprayway im 100% you will love this as im a perfectionist....thanks to you and my personal touch it gonna be beautiful😎
Whats up Sprayway hi man do you have a number I can text you at or call you ×hen I come home from work in May I got a major project for you ill make it worth you wild hit me back asap so we can politic through text or phone call
Nice work, music wS torment but great job
Need to wet that garage floor down bro to keep that dust out the candy
Sometimes I do but most of the time I don't .....thanks for the comment
Please the LOOP is CRAZY, CRAZY,CARZY ,,,,no mas !!!! Excellent work ..
Thanks JOGO
Freaking amazing
Thanks man
I hope your using respirators and protective gear. Please,for your lungs sake please do! Looks awesome!!!
Eric Thanks for the concern 🙏
Wish the music wasn't there.... It's very annoying.... Makes it hard to pay attention...
👌
"You gonna love meeeeeeeeeeee"
It's annoying as shit by far for sure.
Bev Toler yep, I couldn't get past the 0:45 minute point because the music was so annoying. I'll never know how it ended.
you should have skipped to the end because it came out beautiful...very professional...didn't seem like it at first hu...but it did. this guys got talent.
I never comment on vids, but your stuff is the most useful on UA-cam 👍🏽👍🏽👍🏽
Thanks
Go Check Out My Latest How To Fiberglass Video ua-cam.com/video/XNzxIzUfELM/v-deo.html
Hi sprayway can you email me at pharrawaypaint@gmail.com Thanks brother
Incredible artistry. Your work should be on PBS to inspire kids. Inspired me.
Thanks mgn lmmnh
I've never done this before, how much roughly is the cost for a dash, and 4 door panels to fiberglass them? Like is it less than $1,400?
I have been following ur work and seen wth u did to a box chevy tht had alot of body work. I have a 1991 318i e30 tht I want to get painted. I can take the motor out and bring u the rollin body and the full body kit. I need this car to look like it just rolled off the showroom floor. Wht part of the south r u in.
Keep the music!👍
No one better on UA-cam with the door panel, dash and center console glass work. It’s just amazing
Visit : spraywaycustoms.com/ for New & Used Spray Guns & Parts
SprayWayCustoms say fam,do you cut and buff the interior parts also?
TeamMalo no I don't...Unless I get a run or something
SprayWayCustoms thanks fam,I think I'm gonna have due due to some orange peel from the metalflake,oh well here goes to a lot of sanding hahaha
SprayWayCustoms how much do you usually charge for a 2 door.
Sprayway you got a Facebook. Man id love to show you my work I've done from watching and learning from you and my friend Pete at swrnc. Mad props and respect to both of you guys. Got a 95 explorer with 2 6.5 and an 8 in both front doors
You do yo thang bro but that music annoying
Mr Young, thanks man...next time I won't loop the music 🎶 like that...lol
The record is skipping.
One and a quarter hours of that loop is just a bit much. Love the work, love the finished product, but for crissake put the bitch out of her misery.
dozer1642 lol, like shiiid , no I ain't gonna love you if you say that one more time. At least it was pretty low volume when he was speaking
dozer1642 its suppose to do they its chopped and screwed you woudnt know bout it depending where you from
SNEAKAHOLIC817, you make absolutely no sense.
shit wack
Man, I didn't know what to expect as the end result, but I was not disappointed. You got game!
Thanks Rene
that my dog
What's been going on with you? Appreciate you
+SprayWayCustoms nothing just working
camc615 More info on the man please. Name, (T-for Talent) where you at T? Can we mail you pieces? You sick Bra.
SprayWayCustoms
SprayWayCustoms hey bro how much the paint cost for a complete paint job i gotta 1977 Chevrolet monte carlo
music sucks but good video
1:06:17 big paint run lol. still a great vid keep up the good work .
Can i send you my panels lol damm
Just happened on your video, what can I say?.........the background track pretty much destroyed my ears, as far as the fabrication.................an absolute pleasure to witness your process outstanding, now to the paintwork................are you insane? The colour and your skill? Well and truly knocked it out of the park so hard I'm positive it's half way to Saturn at this point. Had to subscribe immediately, you sir are a true artist
I really do appreciate the support
That background music got to go couldn't finish watching the video bc it was so damn annoying
I have to agree. The music on repeat was INCREDIBLY ANNOYING!!!!!!!!!!!
@@henrylong45 That shit was driving me NUTZ!!! I just forwarded to the finished product. I should be able to sue for having to have that shit in my head repeatedly, over and over and over....
annoying music
This outcome looks Phenomenal, it looks nothing short of Amazing.
Thanks Donna
Came for ideas on how to make a panel for my Tacoma, stayed to see the sickest door panel made.
Killer job man!
Thanks 🙏
Bro your colder then a poplar bear toes nails. Just talent!!!! There's nothing like a trade. Keep up the good work
Thanks David Butler
Man. This is a pure work of art. Downright beautiful. You have some patience and skill.
Very much appreciated Steve
@@SprayWayCustoms You deserve it man. Great work.
I’m real late to the party but wanted to congratulate you on your amazing skills and professionalism. Looking forward to seeing more of your work and learning from your creativity. Respect!
That is INSANE!!! the way the blue comes through....OMG!!!
Thanks Rich
Daymn Man.... absolutely BRILLIANT.....HOW DO YOU COME UP WITH THESE DESIGNS....!!!??? WOW !!!!!!
Glad you like them! Thanks a lot
YOU ROCK! Your imagination and skills combined GOT U 412 HATERS! Keep up the awesome work you do. Thanks for sharing your video's to pass on the knowledge!
Very much appreciated
I really enjoy watching your videos cuz you're like an average person that can fix your car and you do it with people to understand and you don't have thousands and thousands of dollars in tools you do it like everybody else can do it I love to have you paint my I have a I have a '98 Riviera I would love to have you paint it but I'm from Ohio
Greatly appreciated
Omg at the beginning I was underwhelmed to say the least but at the end I am truly floored, you my friend have a true talent and do amazing work, it's just amazing how you went from nothing to show quality, keep up the good work.
Thank you so much 😀
Honestly at first i thought this was going to look like a hack job, but im trying to learn fiberglass so i figured id watch and maybe learn some things not to do. Man was i wrong. Final results are ridiculous. I cant beleive how great it came out. Subscribed. I can tell already i can learn from you. Thanks for the great content.
Thanks for giving me a shot 🤝
You explain everything to a T. It’s really appreciated for us who are trying new diy projects. Thanks man !
My pleasure...I really enjoy doing it
what an ingenious way to add the pleats to the panel. Awesome !
Thanks, glad you like it
When you grab a hack saw blade and make magic. Talent bruh. I know people with twice as much access to equipment.. With half as much talent. Sick.
Thanks man