Listen, if you haven’t been moving or fiddling with your pc, and icue starts acting up, its the software. The best solution I have found is to stay away from all the expensive proprietary fan lighting candy, and connect everything to your mobo. The software development team at corsair keeps breaking the code that runs their garbage.
@@ChrisMizo, for reference, I have the iCUE Link h150i LCD AIO w/ QX Fans + an additional 4 QX Fans and an MSI Z790 Carbon Max Wifi II Motherboard. All connections are correct, having been checked and re-done several times... iCUE has never detected the AIO, QX Fans, nor my Motherboard. The LCD Screen displays the temperature and the fans work in their default rainbow colored mode and default fan speed, but they do not increase in rpm under stress at all... (which I discovered while benchmarking)... Luckily, my system performed very well despite this. Thank you for reaching out!
For anyone wanting to use the Corsair Commander core XT & a corsair fan RGB hub or lighting node pro. IF you are NOT using Corsair components it will not work, example i have 7 LianLi uni-fans GPU & CPU water block also a 24 pin strimmer,& distro plate all with RGB, none of which are corsair, To get all my non corsair component's to work & be able to achieve individual control over ever components i had to purchase 2 Corsair Commander Core XT controllers, Then everything worked fine with signal RGB & IQUE. Don't waste your time & money if your not using all corsair components...trust me...
My app doesnt open i tried to reinstall it repair it but keeps telling me my folder is not empty and i cannot find it on my pc smh was working perfectly fine i had to buy a new monitor because my old one broke once i did that its started acting up
Hey, so I just put in the H150i QX, but I can't seem to find the settings for the LCD. It's only showing the liquid temperature, I think. I checked iCUE, but the settings aren't there. I've already got the USB plugged into its own header. I'm stumped. I don't know what to do
@YOSTINATOR you see the type c entrance in the aio module? (Where the hoses are on the radiator) that one connects it to the motherboard but use it's own usb header. Don't use the splice harness that comes with aio.
For me out of nowhere my ram rgb stopped being in sync then when I looked for icue it was missing on my desktop then I tried to uninstall and redownload but it said I already had then out of nowhere it appeared again but it doesn’t detect my ram any tips on how to fix that
Ive managed to get the rgb working but the fans dont move and are not detected somewhere The node is already plugged in the motherboard on a inrerna usb
@@ChrisMizo After searching in many videos etc, i've seen that all fans need alos to connect direclty to the MB... Thing is, my MB only has 3 fan ports so i guess i need a hub now for all 6, right?
Listen, if you haven’t been moving or fiddling with your pc, and icue starts acting up, its the software. The best solution I have found is to stay away from all the expensive proprietary fan lighting candy, and connect everything to your mobo. The software development team at corsair keeps breaking the code that runs their garbage.
I had this issue; along with constant, random disconnect and reconnects - so i reseated all of my connections and it works fine!
Glad you got it working 👍
Great explanation
Thank you 🙏
@Chris Mizo. I've tried all of your tips from your videos. No dice.
What's the issue your having?
@@ChrisMizo, for reference, I have the iCUE Link h150i LCD AIO w/ QX Fans + an additional 4 QX Fans and an MSI Z790 Carbon Max Wifi II Motherboard. All connections are correct, having been checked and re-done several times... iCUE has never detected the AIO, QX Fans, nor my Motherboard. The LCD Screen displays the temperature and the fans work in their default rainbow colored mode and default fan speed, but they do not increase in rpm under stress at all... (which I discovered while benchmarking)... Luckily, my system performed very well despite this. Thank you for reaching out!
For anyone wanting to use the Corsair Commander core XT & a corsair fan RGB hub or lighting node pro. IF you are NOT using Corsair components it will not work, example i have 7 LianLi uni-fans GPU & CPU water block also a 24 pin strimmer,& distro plate all with RGB, none of which are corsair, To get all my non corsair component's to work & be able to achieve individual control over ever components i had to purchase 2 Corsair Commander Core XT controllers, Then everything worked fine with signal RGB & IQUE. Don't waste your time & money if your not using all corsair components...trust me...
My app doesnt open i tried to reinstall it repair it but keeps telling me my folder is not empty and i cannot find it on my pc smh was working perfectly fine i had to buy a new monitor because my old one broke once i did that its started acting up
Hey, so I just put in the H150i QX, but I can't seem to find the settings for the LCD. It's only showing the liquid temperature, I think. I checked iCUE, but the settings aren't there. I've already got the USB plugged into its own header. I'm stumped. I don't know what to do
Join the club. I have had no detection of my aio and qx fans since day one 5 months ago.
@@YOSTINATOR I figured out. I connected the type c connector to it’s own header and worked
@Jonathan_Jokr can you be more specific?
@YOSTINATOR you see the type c entrance in the aio module? (Where the hoses are on the radiator) that one connects it to the motherboard but use it's own usb header. Don't use the splice harness that comes with aio.
For me out of nowhere my ram rgb stopped being in sync then when I looked for icue it was missing on my desktop then I tried to uninstall and redownload but it said I already had then out of nowhere it appeared again but it doesn’t detect my ram any tips on how to fix that
What are your specs?
Ive managed to get the rgb working but the fans dont move and are not detected somewhere
The node is already plugged in the motherboard on a inrerna usb
Make sure your fans are also plugged in and just not the rgbs
@@ChrisMizo After searching in many videos etc, i've seen that all fans need alos to connect direclty to the MB... Thing is, my MB only has 3 fan ports so i guess i need a hub now for all 6, right?
You can use a hub or fan splitters 👌
@@ChrisMizo where does the hub connects in the mb?
On any fan receptor?
@johntsam7071 same pins where the fan plugs in usually.
I’ve tried every video online my rgb fans haven’t showed up at all and my cpu cooler no longer shows up in icue I’m 20 hours in someone please help
May have a bad lighting hub
My ddr 5 ram doesn't show up, how do I fix that?
I was having this issue a few days ago. Make sure your SPD setting in the bios us set to enabled
my ICUE doesn't detect my MSI mobo LEDs. Any advice?
Check plugin in incue settings to make sure it is downloaded and enabled
I cue only detecting my ram
I'll release a different video strictly on ram 👌
so i have tried everything you have showed and still nothing it detects my commander but not my cooler lcd
I have a guide for cooler lcd, this one is more for the lighting nodes