Alot of haters. This looks like the best designed windscreen for this bike. My local honda dealer recommended you guys. Just ordered mine can't wait till it arrives. I got the clear one doesn't look bad to me. Will review once it's on. Thanks for the video
I ride a NC, and have 2 aftermarket shields that look way better. They may not give the same protection as this riot shield, but def look more asthetically appealing.
I think the bracket is super but the screen itself should be available in different formats. This one is so old fashioned. I would like to see a more sportive one in blakc or so....sdo you think it will be available? Or the bracket itself so it will fit the OEM screen as well?
Call us or email us at support@madstad.com and we'll enter a side deflectors order for you. We are updating our web site in the next few days, we'll have it up there soon but for now you can get it by phone or email. Thank you!
I'm not sure what you mean by the "support". This is a complete windshield system, adjustable mounting brackets, side deflectors, GPS crossbar. They start at $299 and the link is madstad.com/collections/honda/products/honda-nc750x-2021
Its a amazingly fuel efficient bike. As a starter not a bad option either. The DCT is kind of a hidden fruit though. Once you try it you will never ride anything beside a honda. Id recommend buying a first with where you learn how to shift, perhaps 750x without a dct. Eventually after you get bored of it upgrade to it. Make your own choices ofc but learning how to shift propperly is recommended in either case id say.
Push the center post up so that it is protruding out the top of the push pin, insert the pin into the body panel, then push the center post back in so that it snaps in flush. That will lock it in place.
Come support and more bubble? How it works? Support it works any bubble or needs to be your specific bubble. They should be used to attach to the honda's original support so as not to keep removing all the fairing.
I just bought a used 2022 NC750X (it was 3 months old) that had this already installed - but a clear screen. It is awesome! I really don't like the look of the one in the video.
Hi Jim, I have the same bike as you and am considering a Madstad. Would you be able to tell me a few more details... what size did you purchase? Any helmet buffering? Have you had an issues with the screen? Thanks much!
@@Richard-dh8ny Hi Richard. The windscreen was on the bike when I purchased it so I don't know the details. But it looks like the one in the video. The angle of the screen can be adjusted to prevent any helmet buffering. I'm 6'0 and I get none after adjusting it. It is very solid. Highly recommend. Mine also has 'wings' to the side below the windscreen. These are pretty handy too.
Good to know! The one in this video is either a 22 or 24" tall screen. I'm only 5-9 so may try the 22". I'm also considering the GIVI which is 19" and looks awesome on the bike. Happy riding!
@@mrfechu6281 Which ones have you tested that were effective? The MadStad is dead calm at 75 mph with my visor open and looking over the top by a couple of inches.
@@somniumguitars858 I just tried the PUIG, and its more effective than the original, but concentrates more air at the top of my helmet. I´m a tall rider. I saw reviews of many others but no one moves me really. There are also different mounts for the stock shield that allow some regulation, but to be honest I gave up on this regard.
@@mrfechu6281 The original is quite small, anything taller would be more effective. The MadStad shield isn't just taller and wider, it is height and angle adjustable so you can direct the airflow over your helmet instead of onto it. That makes a big difference. There is a choice of shield sizes so if you truly want to be comfortable on long rides, there is nothing better. Don't take my word for it, search the internet for reviews.
All of this and you didn't show the final results
Alot of haters. This looks like the best designed windscreen for this bike. My local honda dealer recommended you guys. Just ordered mine can't wait till it arrives. I got the clear one doesn't look bad to me. Will review once it's on. Thanks for the video
Not haters. Just people who can take a bit of wind.
@@1990-t1j I'll take wind all summer long but in cold up here in northeast I appreciate the protection from the elements
I ride a NC, and have 2 aftermarket shields that look way better. They may not give the same protection as this riot shield, but def look more asthetically appealing.
Hey how are just wondering if you can do a video on how to replace handlebars on honda nc750x dct 2015 please any advice much appreciated
Great video thank you for sharing
Can it be fitted together with the barkbuster handguards without conpromising the turning handle radius?
I think the bracket is super but the screen itself should be available in different formats. This one is so old fashioned. I would like to see a more sportive one in blakc or so....sdo you think it will be available? Or the bracket itself so it will fit the OEM screen as well?
Nice teach work. How can i find that adjustable bracket on market? Like it. Thanks.
Do you make this windshield to fit 2022-24?
Please share with us the video of the bike with the new installation and can the handle turn fully ? tks
I wonder where the lock washers included in kit go.
what size is this on the video?
Nice bracket, since it so difficult to install, should recommend to put some Loctite on the bracket screws..
Good idea!
good
I think you didn't connect the signal light cable.
What throttle lock is on the bike in the video?
Looks better with no screen. That big screen is ludicrous.
Videos are very helpful. thank you~!
You're welcome! We'll try to update these videos with each new model!
Please tell me where can i order spare white side panels from
Call us or email us at support@madstad.com and we'll enter a side deflectors order for you. We are updating our web site in the next few days, we'll have it up there soon but for now you can get it by phone or email. Thank you!
hi what it's the price for the support?
I'm not sure what you mean by the "support". This is a complete windshield system, adjustable mounting brackets, side deflectors, GPS crossbar. They start at $299 and the link is madstad.com/collections/honda/products/honda-nc750x-2021
should i buy my first bike nc with dct?
Its a amazingly fuel efficient bike. As a starter not a bad option either. The DCT is kind of a hidden fruit though. Once you try it you will never ride anything beside a honda. Id recommend buying a first with where you learn how to shift, perhaps 750x without a dct. Eventually after you get bored of it upgrade to it. Make your own choices ofc but learning how to shift propperly is recommended in either case id say.
How do you but pack the push pin?
Push the center post up so that it is protruding out the top of the push pin, insert the pin into the body panel, then push the center post back in so that it snaps in flush. That will lock it in place.
@@markstadnyk172 hi bro, thanks for the tip, i will give it a try!!
Come support and more bubble?
How it works? Support it works any bubble or needs to be your specific bubble.
They should be used to attach to the honda's original support so as not to keep removing all the fairing.
Τhats why i love naked bikes....
Am I the only person who HATES hidden clips and fixings on modern bikes? Give us normal bolt-on panels ffs...
nice, but the video is very shaky
I just bought a used 2022 NC750X (it was 3 months old) that had this already installed - but a clear screen. It is awesome! I really don't like the look of the one in the video.
Hi Jim, I have the same bike as you and am considering a Madstad. Would you be able to tell me a few more details... what size did you purchase? Any helmet buffering? Have you had an issues with the screen? Thanks much!
@@Richard-dh8ny Hi Richard. The windscreen was on the bike when I purchased it so I don't know the details. But it looks like the one in the video. The angle of the screen can be adjusted to prevent any helmet buffering. I'm 6'0 and I get none after adjusting it. It is very solid. Highly recommend. Mine also has 'wings' to the side below the windscreen. These are pretty handy too.
Good to know! The one in this video is either a 22 or 24" tall screen. I'm only 5-9 so may try the 22". I'm also considering the GIVI which is 19" and looks awesome on the bike. Happy riding!
All that work taking the bike apart and it looks horrendous with that windscreen. Blocks the wind and the looks of the bike equally well. 😂
If you require that much wind protection, buy a Civic.
Lol
😂
What a fucking big shield..... It looks terrible. Sorry
👍
Ooh that's an ugly screen!
Shit. Two small Allen bolts left over.
Nice brackets, awful windscreen.
What is awful about it? I've personally driven behind it, it's the most calm pocket of protection I've ever felt.
@@somniumguitars858 The looks. There are much better looking, and efective,
alternatives.
@@mrfechu6281 Which ones have you tested that were effective? The MadStad is dead calm at 75 mph with my visor open and looking over the top by a couple of inches.
@@somniumguitars858 I just tried the PUIG, and its more effective than the original, but concentrates more air at the top of my helmet. I´m a tall rider. I saw reviews of many others but no one moves me really. There are also different mounts for the stock shield that allow some regulation, but to be honest I gave up on this regard.
@@mrfechu6281 The original is quite small, anything taller would be more effective. The MadStad shield isn't just taller and wider, it is height and angle adjustable so you can direct the airflow over your helmet instead of onto it. That makes a big difference. There is a choice of shield sizes so if you truly want to be comfortable on long rides, there is nothing better. Don't take my word for it, search the internet for reviews.
That's a terrible looking windshield.
LMAO
Yucks
Looks ugly with this screen.
This was the first shield, a prototype. We've changed the design since, will be updating our web site shortly.