How to fit the Cybex Sirona Z i-Size onto the Base Z Isofix - Baby Lady
Вставка
- Опубліковано 15 вер 2024
- In this video we show you how to fit the Cybex Base Z & Sirona Z in a car.
We also show you the best way to rotate the Sirona Z car seat.
Want to see more? Subscribe to our channel and don't forget to click the bell icon to get notified about all of our latest videos!
Shop with us at www.babylady.co.uk
Instagram: / babylady_uk
Facebook: / babylady1991
Thank you for watching today!
So helpful regarding the rotation for the Z base! Thank you 😊
Perfect explaination for people like me using cloud z chairs for the baby
Ooooh finally a good explanation for my problem 😅🙈 thank you!
Very helpful explaining how the rotation works! Thanks
You absolute legend. Could not rotate the seat before this video 😅
Excellent. You cleared all my doubts. Thank you so much😊
We are so glad you found it helpful.
brilliant! especially the headrest-safetly-lock-mentioning.
I just got one delivered - the seat seems to be wobbly after fixing (all marks are green). It seems that yours also is, although it has not been shown tested in this vid. The fixed seat does not feel sturdy. I am not convinced about this model ride quality, since it shakes all over when mounted.
Update after couple of months: I have had it checked in shop - they are all like that. In daily use the chair is good; I have forgot about the initial issue, only annoying thing is clipper that is somehow more difficult to operate with single hand than Britax Dual Fix that I have for my other baby, Cybex though have very important advantage - it takes less space than Britax
Same here, good to know that they are all wobbly but it doesn’t feel secure. Been searching for this but nobody is simulating this in their reviews. Thanks.
Do you mean the base or the whole seat? I had difficulties installing the base. Had to smash it real hard and many times agaist the car seat to get it set thightly. The base is now firmly in place but the seat on it does have a small wobbly still.
so helpful, thank you!
You are most welcome :)
My issue with the base and car seat is that the incline is not impressive. It looked better in store because it was displayed on a chair which is flat. Now, how can this be fixed in the car where there is already a minimum/relative incline before the isofix is clicked in ?
If your car has a very steep incline ( and some do ) then as you say the car seat will be more upright. There is no way to change this in your car. The only solution is a different car seat/ base. We always recommend going to your local independant nursery store as they will have experts who can help and advise
Can you recline forward facing same as rear facing?
Does the child need to be 105 cm to use in forward facing or if you have a smaller baby (let s say 90cm)you 'll need to readjust headrest everytime to rotate? Does the base z limits the recline levels if I take the z2 seat?(I have a base z and cloud z). Thanks!
How many recline positions in rear facing are available when on base Z?
If i purchased base T would there be more recline positions in rear facing?
There should be 3 positions in total, upright middle and recline
Cybex replied saying 5 in rear facing and 3 in forward facing
We just got the Sirona i-size and attached it to our cloud z base. Can the Sirona be used with just seat belts too ?
The Cybex Sirona cannot be installed via seat belt, only by the Base Z isofix base.
Do you maybe know the reason for seat rotating all the way when the head section is down?
We would suggest going back to the retailer that you purchased the seat through as this could be a fault
Does the magnets on theside work? Mine aret strong enough to hold. The rotating isnt clicking it rotates further away to the front when i try to pick uit my baby
Hi Kelly, the magnets wil only work in one position. If you have an issue with the rotation I would suggest contacting your place of purchase as you may have a fault
Hello. Any advice for how to get the seat to stop beeping without just taking the battery out? All three markers are green, but my seat is still beeping. Thanks!
You should return this to your supplier in case there is a fault, if the leg is on the floor and the light is green it should not beep.
Is it possible to be fitted without isofix?
No this seat can only be fitted with isofix
I’ve just bought this car seat and am struggling to get the seat to rotate forward despite the head rest being above the minimum marker level (I’ve set it to its highest position). Any advice?
You might need to contact your retailer to check if its faulty as as long as the head rest is over the minimum height it should rotate.
I had the same issue! Flip up the back padding and you’ll see a little red switch. Lock it into the upward position and your seat will rotate as demonstrated in this video. ✅
I can’t find the video for the baby carrier!!!
Hi Sophie. Which carrier is it which you are looking for a video on?
Whats the difference between sirona s and sirona z please
Hi Karen, The Sirona Z is part of the Z modular system and fits onto the Base Z, the Sirona S has isofix built in so does not need a seperate base
@@BabyLadyUK1991 got it, thank you!
And the SEAT belt?
The Sirona Z is an isofix only car seat so does not require a seat belt or have an option to use the seat belt instead of the isofix