Це відео не доступне.
Перепрошуємо.
XMAS TREES anyone can make || Beginner Woodworking Projects
Вставка
- Опубліковано 9 лис 2022
- These 5 DIY WOODEN CHRISTMAS TREES are a great beginner woodworking project to either sell at the holiday markets or to decorate your house. All of them can be made out of scrap wood with very limited tools. In fact, all you really need is a jigsaw and some glue. A bit of paint helps make them pop.
For a comprehensive list of all my tools - www.start-maki...
Fairy lights link - amzn.to/3hytfeZ
US link - amzn.to/3UEzegc
If you enjoyed this video, you will love the. ones below
7 homemade Xmas Gifts - • Beginner Woodworking p...
Stunning wood bending build - • Beautiful WOOD BENDING...
Tools every beginner needs part 1- • 7 Small TOOLS I belie...
Tools every beginner needs part 2 - • 11 Better TOOLS For Be...
Worst tools ever bought - • 5 Woodworking tools to...
---------------------------------------------------------------------------------------
Tools that I love. Please check out the links. They cost nothing extra but offer a small commission to the channel. Your support is always more than appreciated.
CORNER SQUARES
Plastic positioning squares - amzn.to/3KhjcVT
(US LINK - amzn.to/3SMQ23x)
ADHESIVE
Titebond TiteBrush - amzn.to/3rBstj6
Large Gluebot - amzn.to/3rDiR7a
(US LINK - amzn.to/3WbrVyu)
Activator Spray - amzn.to/3SRG7Kq
DUST PREVENTION
GVS Ellipse Mask with p3 filters - amzn.to/3QOV0N3
(US LINK - amzn.to/3TOq9li)
SQUARES
Speed Square 7" - amzn.to/3PMlIEr
(US LINK - amzn.to/3D7Vjga)
Small Square 2" - amzn.to/3QPEQD3
(US LINK - amzn.to/3N9e1Zr)
Framing Square - amzn.to/3QPEVGR
(US LINK - amzn.to/3FuoVHc)
Starrett Combination square - amzn.to/3AeLM5m
(US LINK - amzn.to/3f72Nbt)
SHARPENING
Diamond Stones (Faithful) - amzn.to/3DVzfHN
Strop - amzn.to/3r70ZRZ
(US LINK - amzn.to/3DBW2HO)
CARD SCRAPERS
Card Scraper - amzn.to/3BPhdE7
(US LINK - amzn.to/3TYWiWP)
Burnisher - amzn.to/3BOKv63
(US LINK - amzn.to/3DgigOc)
CLAMPS and CORNER SUPPORTS
Squeeze Corner Clamp - amzn.to/3Td6MlP
Jorgensen 12" f clamps - amzn.to/3KyYPUl
POWER TOOLS
Makita Cordless Fan - amzn.to/3dXAlb3
(US LINK - amzn.to/3syidsb)
Makita Jigsaw - amzn.to/3TeViOL
(US LINK - amzn.to/3NdCBYZ)
Makita 5Ah Battery - amzn.to/3Kjvb53
(US LINK - amzn.to/3DzHQze)
Makita Circular Saw - amzn.to/3TdqNZr
(US LINK - amzn.to/3gMHFro)
Makita Battery Charger - amzn.to/3QQfAfW
(US LINK - amzn.to/3TRLx8K)
Makita impact Driver - amzn.to/3T1XY1f
(US LINK - amzn.to/3Fm4CM4)
HAND SAWS
Suizan 240mm Japanese pull saw - amzn.to/3TdVe1M
(US LINK - amzn.to/3W8uwZF)
Suizan 120mm Japanese pull saw - amzn.to/3AlymER
(US LINK - amzn.to/3U5Fb5P)
As an Amazon Associate I earn from qualifying purchases. It is a small income to the channel at no extra cost to the buyer.
Some items may differ slightly from those seen in the video due to location and availability. Items are a recommendation based on my experience.
---------------------------------------------------------------------------------------
You can follow the channel on social media.
Instagram -------------------------- / startmaking2022
Website --------------------------- www.start-making.com
---------------------------------------------------------------------------------------
If you find this video entertaining or in any way helpful please click the Like, comment and Subscribe.
You can share it with your friends with the following link
• XMAS TREES anyone can ...
My channel for subscriptions and to check out more videos is -
/ @startmaking1
#woodworking #howto #beginnerwoodworking
Thank you for watching and happy woodworking.
I hope you enjoy the video. Please watch as long as you can. This helps the channel more than you know. Comment and Subscribe and you will never miss a video. Thank you so much. Happy building.
I do believe the last one is my favorite! I love the color , too.
Thats really kind. I actually got that one out the other day and I think that I agree with you. Honestly, it came about as a use for the off cuts of other things.
I really like the pine tree with the candle holder - and the simple triangles with the layered sides. So simple yet stylish.
Thank you so much
👍
This video shows the use of scrap wood to make Xmas decorations. I like the last decoration, but all have their use. Well done. Thanks
Not the right season but I guess people wanting to batch them out should start fairly soon.
I love the 3 trees you put together, with the lights just gorgeous. 😊
Thank you Ellen. Easy builds too.
I really like the Matthew Peech design
Me too, he's got a good eye.
I really love these projects. Simple but pretty and would look great.
Thank you Lisa. Very kind of you. They were really easy and even the slight fails were ok. Thank you as always for watching and for commenting.
So good!!! Thank you for these ideas!!!!
Thank you June. Im glad you liked them
Very clever! And Enthusiastic!! And God knows I a ton of scrap...Wilber USA🙂🙃🙂🙃🙂
Hi Wilbur. Thank you very much. Scrap certainly builds up quickly.
@@startmaking1 yes, I have a pile beside my shop that is 15x5x4 foot, it’s quite a mix of things. It’s on a tarp and fully covered by another tarp. Must get into it before some critter makes there home in there.
Some really easy build here to get you ready for Christmas.
soon be here
I am so blown away. You have some great ideas. I hope that I can make a few. I love your trees ❤😊
Oh , thank you. That's really kind. I'm sure you can make these.
Merry Christmas! Thanks for sharing.
Hi Ken. My first Merry Christmas, love it. Back at you. Feels a way off but I wanted to get this one out early incase people wanted to try making them . thank you for watching. and for commenting.
I really liked this video. I believe I will save it to try later.😊
Hi Ellen. Wow, this one has not been watched since Christmas. Glad you enjoyed it. Once you navigate the angles, you can easily make any of these. In truth I made it up as I went along. Really fun projects.
Gracias por enseñar esas técnicas! Bendiciones!
Thank you
Good job and projects thx for sharing enjoyed it Cheers
Thank you Larry.
Thanks
Hi Bruce. You are very welcome. Thank you for watching and for commenting.
Some awesome ideas, thank you for sharing!!!
Hi Brent. Thank you. A bit late for this season but always good to get a head start on next year. Thank you for watching and for taking the time to comment.
@@startmaking1 I’m definitely going to try my first wood craft soon. Happy New Year!!
@@BrentAyotte Happy New year and I cannot wait to see what you make. Whatever it is Im sure it will be great
@@startmaking1 definitely
Wicked video again mark they look amazing certianly something someone with half brain like me could do. The last one the 3 triangles are they 45 at the points or 90 but joints? Think am certainly gonna attempt them and the similar one to yours and Mathews. Love the tea light holder one though 🏴👍
Hi Michael. As always, thank you. The top of the triangles are 30 from square. For this I set my circular saw to 30 and then sliced across the ends. They are then set not as a mitre but with one slightly shorter than the other, sitting against the side so as to get end grain against side. Then the bottom I fudged a bit. The bar across is just a butt joint to the sides. This was a seriously weak triangle but with the blocks joining the 3 triangles together I made sure to overlap each joint of each individual triangle. Now it is super strong. To be honest, any way would work so long as each triangle comes out the same. Or close. The tea light one was nice until I sprayed it and it went very yellow. Shame. Oh well.
@@startmaking1 fair enough get it now will definitely be giving it a shot some point trying get decent template for Christmas tree and gingerbread man cheese boards done up the now then gonna look at few different Christmas tree decorations. Should get Tin colron natural danish oil off Amazon would have brought it up alot nicer can go with just single wipe on with rag coat. Hows everything anyway?? 🏴👍
@@michaelwillson6847 Great advice as always Michael. I feel like we are kind of learning together and from each other. Love the woodworker community. I have been eyeing up these clear plastic router templates that I see on videos from the likes of designs by Donnie etc. Look like they will be great fun as and when I get a router.
@@startmaking1 haven't seen them mark I'll need check them out ave just been finalising ply template of Christmas tree shape although not going well got them template but dunno what is happening with jigsaw just doesn't seem be doing what a want it to. Ave tried really fine blade (20tpi) but can't get it to cut right dunno if it's the Jigsaw or what tried the standard blades they just wasn't working either. Need a bansaw!! Dunno about learning from me am certainly learning from u though so thanks for that. ,👍🏴
My Favorite is the first tree, what's yours?
Personally I like the last one best. But they are all really nice and will make any house christmassy!
thank you