TECH TIPS: Preventing Body Filler Pinholes
Вставка
- Опубліковано 25 чер 2024
- Join Jason Garfoot, 3M Application Engineer, as he delves into body fillers, troubleshooting, and perfecting pin hole prevention and repair.
Important notes (00:27)
Wear proper PPE: safety glasses, protective gloves, respirator and whatever else you need for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations to confirm you’re using the correct adhesive for the job.
Properly Mixing Filler (00:53)
Proper Amount of Hardener (02:49)
The Most Common Mistake (05:56)
Products used in this video:
3M™ Platinum™ Plus Filler
www.3m.com/3M/en_US/p/d/b4006...
For more advanced tutorials, check out 3M Collision Repair Academy
www.3m.com/3M/en_US/collision...
You’ll find courses that will expand your knowledge, deliver practical procedures that you can use right away, and, in many cases, earn you I-CAR credits.
Safety and warranty information
www.3m.com/3M/en_US/collision...
Website: www.3MCollision.com
Instagram: / 3mcollision
Facebook: / 3mcollision
The information contained in the 3M Collision Repair UA-cam videos is intended for industrial/occupational use by persons with the knowledge and technical skills to use such information. For additional information, including important safety and warranty information, regarding 3M Automotive Aftermarket products, visit: www.3Mcollision.com/info. Please follow all local and country regulations regarding use of the products.
Important Note: There are many factors that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process and determine what’s appropriate. 3M recommends reviewing relevant vehicle repair and OEM guidelines prior to starting all repairs.
This video may show products not available in your area. - Авто та транспорт
thank you... I learned a bunch from this video! I've been doing almost all of it wrong!
tremenda explicacion, super sencillo.
Thank you for this tutorial !!! ... much informative information tips - kudos and accolades !!!
My restoration shop has been more economical and productive because of 3M technology. About the only exception is filler. Here in Central Florida, Rage Ultra mixed with Ultra Extra has made spreading filler in a 100° shop with 50% humidity effortless. 3M Platinum filler is ok, but nothing sands as easily as Rage Ultra.
A little confused, you say don't apply filler over the basecoat and go and apply filler over the base coat, could you clarify, please
It's ok to have a little filler over the edge knowing that you will be sanding it back off the edge while final sanding and prepping for primer. It becomes an issue if you overlap the paint edge by a lot and the filler remains over that painted edge once you apply primer -- that's when it traps in the styrene, which will shrink back later. So it's ok to overlap a little as long as you sand it off before priming. 👍 Some repairs are too small to completely avoid the painted edge when applying the filler.
You should be feathering out bare metal all the way around you filler after sanding so that little bit of filler will be gone
No
Matter how many times I press it out I never get rid of the bubbles. I have the right amount of hardener what else can cause this? I scoop it out with a mixing stick then use a spreader to mix it
There are many reasons why the Pinholes appear.
Mixing of filler and hardener in a stirring motion is a common mistake. This introduces air into the filler.
Mixing of filler in can is also something that can cause pinholes due to trapped air.
Too much hardener in filler can also cause this. To know other reasons that cause pinholes, please watch the video from (05:56). Hope this helps!
you will never stop pin holes entirely period
reduce , yes
also thickness and types , manufacturer plays a part.
Calanger filer is best
can't seem to find said brand anywhere
found it ... Challenger by Rondex