Low temperature solder paste? It's been a few years, but low temperature solder paste didn't work when I was fixing cell phones. The connectors would pop off the pcb when you plugged or unplugged the flex cables. Maybe by stabilizing the solder joints with epoxy conformal coating?
Similar to any other solder paste (with same alloy) but could be molten under low temperature heat which makes it a low temperature profile solder paste, you can check the ref. from CHIPQUIK SMDLTLFP10T5 for the details
🎉🎉Congratulations 🎉🎉 You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩 Please write your JLCPCB Account number or send it by Email to megadasfirstgate@gmail.com If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment 🎉🎉🎉🎉🎉🎉🎉🎉
🎉🎉Congratulations 🎉🎉 You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩 Please write your JLCPCB Account number or send it by Email to megadasfirstgate@gmail.com If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment 🎉🎉🎉🎉🎉🎉🎉🎉
Ahhhhh... How simple it looks for anyone who _has_ skills in engineering PCBs and soldering. Now I just dream that somebody who happens to be both having skills in PCBs/soldering, _and_ music/Eurorack, would decide to make a similar “throne-style” breakout but in Eurorack format. Making essentially a super-powerful, super-customizable, and even upgradeable (just add H7 or X8 or any future compatible Arduino!) Eurorack DSP.
@@juanbaldo98 It isn't a breakout board in eurorack format, and doesn't let you plug/swap any compatible Arduino; the only where this daisyseed nonsense is related to my idea is “it is somewhat related to audio too”.
It depends on the PIC category, surely it has to be compared with a 32-bits PIC, you can consider that the Portenta is based on the ST MCU a dual core microcontroller (H7 and H4 cores) with many high integrated peripherals especially for data communication, plus the extra ICs of the Portenta board like wifi and Bluetooth etc : )
I just dig into the details of your schem! why have you used those screw headers instead of plug-in connectors? This is a good training board but why have you just used almost 5% of it?
Yes that's right, I just did this video as first part of this project where I showed the hardware making steps. More posts will be published so soon about this Throne board 😉
Can I use the PLC IDE for the bare portenta?
Low temperature solder paste? It's been a few years, but low temperature solder paste didn't work when I was fixing cell phones. The connectors would pop off the pcb when you plugged or unplugged the flex cables. Maybe by stabilizing the solder joints with epoxy conformal coating?
Similar to any other solder paste (with same alloy) but could be molten under low temperature heat which makes it a low temperature profile solder paste, you can check the ref. from CHIPQUIK SMDLTLFP10T5 for the details
Great board, and even better editing man!
Your feedback is much appreciated 😊
The best electronics diy channel I discovered it with the business card pcb video ♥ good luck bro keep going you the best
Thanks 😊
🎉🎉Congratulations 🎉🎉
You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩
Please write your JLCPCB Account number or send it by Email to megadasfirstgate@gmail.com
If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment
🎉🎉🎉🎉🎉🎉🎉🎉
Any updates?
Excellent project Chris, Hope there will other version of the throne board. Nice job
Thanks dear Hamma, yeah sure, I wilk keep you updated
I like it so much bro , specially the decision to use an smd header to connect this Arduino portents❤️❤️❤️
Many thanks Dear 😊
🎉🎉Congratulations 🎉🎉
You have won a prize in this Giveaway program🥈 which is 30USD that you can use in JLCPCB platform to order some PCBs🤩
Please write your JLCPCB Account number or send it by Email to megadasfirstgate@gmail.com
If you are not registered yet then you can go to JLCPCB.com and create your account then write your account number here in a comment
🎉🎉🎉🎉🎉🎉🎉🎉
proyek robot arduino yang anda buat sangat bagus , sangat membantu saya untuk belajar lebih banyak tentang board arduino portenta
salam dari Indonesia
I like it , Great Board
Arduino Portenta! I don't even know that it exists
It has been produced a year ago 😅 Arduino Portenta has higher performance than the other Arduino boards
I found it 5 mins ago.
@@DIYGUYChrisdamn thing is o.p.
Why didn't you just soldered headers! I don't think that it will screw-up the board
Thank you for your comment, hummm yes maybe I will try this on a breadboard so in this case the headers are necessary. Next video maybe :)
@@DIYGUYChris nice
so I guess that you make a led Blink just as first test and you will use the rest of the board options in the coming videos. good
@@miaharley8051 exactly
I'm always the first person commenting here 😎
I hope I win 😀
Nice #Arduino video 💠
Just the video that I needed
Good Job!
Oh! Thank you for your comment. 😊
Very informative. Excellent work. Thank you.
Ahhhhh... How simple it looks for anyone who _has_ skills in engineering PCBs and soldering.
Now I just dream that somebody who happens to be both having skills in PCBs/soldering, _and_ music/Eurorack, would decide to make a similar “throne-style” breakout but in Eurorack format. Making essentially a super-powerful, super-customizable, and even upgradeable (just add H7 or X8 or any future compatible Arduino!) Eurorack DSP.
Check out the daisy seed from electro-smith. It's an stm32 based board ( like the portenta ) built with audio in mind.
@@juanbaldo98 It isn't a breakout board in eurorack format, and doesn't let you plug/swap any compatible Arduino; the only where this daisyseed nonsense is related to my idea is “it is somewhat related to audio too”.
Why not in focus?
Focus!
How does this compare with PICs?
It depends on the PIC category, surely it has to be compared with a 32-bits PIC, you can consider that the Portenta is based on the ST MCU a dual core microcontroller (H7 and H4 cores) with many high integrated peripherals especially for data communication, plus the extra ICs of the Portenta board like wifi and Bluetooth etc : )
Sorry yeah that was a very broad question
@@PurpleMomgoose you don't have to worry, here you can ask whatever you want ;)
I just dig into the details of your schem! why have you used those screw headers instead of plug-in connectors?
This is a good training board but why have you just used almost 5% of it?
Yes that's right, I just did this video as first part of this project where I showed the hardware making steps.
More posts will be published so soon about this Throne board 😉
I am Ahnaf Hasan Sabuz. I am from Bangladesh. I watch all your videos.
Thanks
Much appreciated Ahnaf 🙃
This is great dude
Thank you :)
Nice design
Thanks a lot
Great video Chris 👍
Oh! Thanks Adam
And congratulations for your spider robot, it goes viral on social media 🤗
Super 👍👍👍
Thanks 🤗
Interesting
Thnak you for your comment :)
Wow, good job
Thank you dear Inly 😊
A7laaaa nees
Rabbi ycheddelna fi sa7tek 😁
Good job!
Thanks for your comment 😊
real nice! helpful !👍
Thanks ☺️
Thank you for such amazing video ☺️
Thanks Osama 😉
I will make more similar videos so stay tuned 😊
Good 🤩
Thanks
genius
The sticker on the STM32H747XIH look fake.
Fake! It is extremely hard to mimic such board, especially with its 8 layers PCB
Hi there I am currently doing a design and its almost ready it would be great if I win this giveaway xD
Thank you for your comment. I wish you the best of luck 🤗
👏👏👏👏👌
You said that the board is not for simple projects like led Blink, but yet you are using it to blink an led 😂
Hahaha yes that's right but this is just a short demonstration that the board is well designed 😊
💞💞💞💞💞
Thanks for your comment 😊
Randy
Welcome Randy 😊
:o
No auto range multimeter ? What the fuck ?
Very cool, great video❤ subscribed 😉🇧🇷👍 @arduinomaquinas thank you bro 👏👏👏