Review of ISTA Breeze tower for Wind turbines

Поділитися
Вставка
  • Опубліковано 22 жов 2022
  • Quick review of the ISTA Breeze tilt tower system for wind turbines (i-700, I-1000, I-1500, I-2000 and ISTA Safe).
    What I like and what I don't like.
    dditional components you have to buy..
    May you can use this tower to W-LAN or Wifi links as well as for amateur radio (fieldday or emergency operations)
    Please like or add some comments below
    istabreeze.store/products/mas...
    My video about the concrete foundation:
    • Concrete foundation fo...
    Please like and subscribe the channel
  • Наука та технологія

КОМЕНТАРІ • 16

  • @highgeartube
    @highgeartube Рік тому

    Good suggestions for all new users : )

  • @nhikoid
    @nhikoid Рік тому +1

    Good video. Thanks. The tower is a lot of physical work to get right, but well worth it. Look forward to your videos on controllers. Have you thought perhaps of using these great little A30 controllers ( or CD60 controllers ) with either mechanical or solid state relays?. Maybe a good option for those on a smaller budget who dont want to spend 100's on an Ista controller ( or maybe even several thousand on expensive Midnite Classics+Midnite Clipper annd the like.

  • @TastySki
    @TastySki Рік тому

    Hi there, which Istabreeze turbine have you got and how much kWh are you producing? What’s your average wind speed in m/s?

    • @freeenergyonshore2828
      @freeenergyonshore2828  Рік тому +2

      Hi
      Actually, I'm using the I-1500 and I-700. My neighbor has the I-1500. I guess, the I-1500 makes more sense than the I-2000 - but keep in mind, your average wind speed should be more than 5,5m/s.
      The average wind speed on a detail map is around 6,5 m/s at my location. Some maps (based on measured data) showing even 7 m/s.
      On bad days (below the average speed) I have around 1kw/h at the I1500. On good days, more than 7 kW/h.
      Please note, it's absolutely essential to have nothing - really nothing - in front of the wind turbine. Even small trees will decrease the results fundamentally.
      Best regards
      Alex

  • @boringsoftware2093
    @boringsoftware2093 Рік тому

    Eine Frage: Wieviel kWh konntest Du an Deinem Standort (Flensburg?) 2022 generieren? :D (mit Speicher?)

    • @freeenergyonshore2828
      @freeenergyonshore2828  Рік тому +1

      Hallo. Offen gestanden habe ich es noch nicht aufsummiert, da ich häufiger das Setup umbaue. Es sind aber mehrere 100 seit Herbst,. Standort ist ungefähr an der Nordspitze Spitze des Jadebusen. Ja ich speichere, derzeit 30kW Racks, überwiegend aus Asien

    • @boringsoftware2093
      @boringsoftware2093 Рік тому

      @@freeenergyonshore2828 nice nice :D möchte auch sowas haben und mit solar kombinieren :D gibt jetzt neue ista mit Kipp-Mechanismus ua-cam.com/video/rXigVVp-Rgk/v-deo.html ihre Meinung?

    • @freeenergyonshore2828
      @freeenergyonshore2828  Рік тому +1

      @@boringsoftware2093 Hi. Das gibt es schon eine Weile. Ich wollte die kleine Version im nächsten Herbst einmal ausprobieren. Insgesamt sind die natürlich noch mehr Bauteile die korrodieren können. Das ist neben den extremen Böen ein weiterer Faktor an der Nordsee

    • @boringsoftware2093
      @boringsoftware2093 Рік тому

      @@freeenergyonshore2828 Ovatrol ist Dein Freund :D

  • @mrdbaker2ubaker182
    @mrdbaker2ubaker182 Рік тому

    How long is each pole? Does not say on website

  • @tinyhouseonwheelsireland
    @tinyhouseonwheelsireland Рік тому

    Great video, what stakes did you use for the supporting tie cables? did you pour concrete with hooks OR drive steel bar into the ground?

    • @freeenergyonshore2828
      @freeenergyonshore2828  Рік тому

      Hi. I use 1 meter long steel bar to support the tie cables. I use concrete with hooks and in addition some steel bar. Please watch this video : ua-cam.com/video/G6lFDeaAhXM/v-deo.html

  • @freeenergyonshore2828
    @freeenergyonshore2828  Рік тому

    My video about the concrete foundation : ua-cam.com/video/G6lFDeaAhXM/v-deo.html

  • @MrJFoster1984
    @MrJFoster1984 Рік тому

    No washer needed on the base plate. The manufacturer would have calculated the size of wire required and sent the correct size 🤷‍♂️

    • @arveskjellanger4121
      @arveskjellanger4121 Рік тому

      My tower came with very thin wires. I dont know how many kg they can support. So I changed it for a wire that was 2-3 times thicker. In strong wind I would never trust the enclosed wires.