Secret Profile Pipe! WHY DO WELDERS NOT SPEAK ABOUT IT!
Вставка
- Опубліковано 19 бер 2020
- A very useful idea for every man! To the garage or workshop !!
Friends, my name is Sergey! I am the author of the channel HandiCrafts.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy - Наука та технологія
Fantastic ! Since watching this video I always cut my tube too short so that I can join it back again like a professional...
Very useful 👍
4 mins of my life I'll never get back.
Well this is very useful for people that do not know or have welfing equipment.
Thank you.
How about to use smaller pipe and drill few holes in big pipe and weld it?
Welders don’t tell you about that because they usually don’t plan on separating the material after they weld it Im guessing?
Hi! Sir Sergey your channel was great for all fabricators such as wonderful idea.
Gracias por compartir, saludos!
Super execele contenido,🎬📽️🎬 wuauuuu!!! 👌🚀Sigan así🚀 y saludos👍😃 desde zapopan jalisco México 😄🙋♂️
I think it is a cool trick, and although I might never use it, it gives me ideas to store up, and use on future job that you need an alternative solution.
Smaller diameter section of tubing cut about 6 inches and stuffed into 2 larger pieces accomplishes the same thing and adds strength in a 1/4 of the time.
Waaoooo súper genial..
Franchement bravo et mille merciiiiii
*SERGEY, esos guantes rotos con ese nudillo o dedo quemado me convenció para suscribirme y saber que estoy con alguien que sabe del trabajo.
saludos
Show,ainda não tinha visto desse jeito. Like
You draw a straight line mark on the street line corner.
Omg. What a talent. 👏👏👏👏
Its useless 🤣🤣🤣
gute Arbeit und danke für tolles Video 😎👏
Thank s mike
👍👍
Such friendly comments....It's great to see sarcasm is alive and well....If you can't weld, why not!...Sometimes, you do what you have to do or can....
i like your Smile and your idea show
Excellent
Just get some smaller tubing instead...way cleaner...
I love the idea I will be using it
Wow!
Bom trabalho amigo 👍
this is actually very useful if you want to connect a new one to an already vertically installed in high altitude , 2-3 meters. It will make it more secure.
In der Zeit hab ich schon das nächst kleinere Rohr zugeschnitten und in ein Ende eingeschweißt. Das hält dann auch was aus
Interesting, obviously for disassembly purposes good stuff man
Miguel Medina or extension.... Way to think outside the box
Vocês são demais!!!
Muy buen travajo
Very nice brother. ....
Nice work.
What kind of camera do you use?
I love it
Awesome trick
If you charged by the hour and the customer found out you were wasting their money doing this you would have no more business
Probably more of a handyman project, of course a fab shop wouldn't do this.
I feel like this would be used for welding pipes together. You could use his solution in case you didn't have access and were doing something DIY at home...
REAL welders don't feel the need to waste that time. Just weld it!
Real welders know the difference between SQUARE TUBING and pipe too.
@@bobjohnson7797 f1£×6/82
@@tomicask That's what I said.
No kidding !!
@@bobjohnson7797 yyyyyyhhýyyyhyyhyyyhhhhyyyhhyyhyyyhy
sehr gute idee. danke
Rất tuyệt vời...
Damn it Carl! We're going to have to transfer to an outside position. Outside the company. You're fired.
This guy is hilarious. Imagine this dude on a construction site!
His nick name will be "double time"
Dotun Arowolo the fact that he’s using paint marker instead of soap stone shows his experiences
You're very clever
Gostaria de rever o vídeo da mesa dupla face e do equipamento de fazer barras.obrigado!
Just weld it. I don't think you need screws.
👍👍👍
Super
:) oh God, give me my time back.
merci
Nice sir g
I think this guy just makes the guys in the welding world laugh
mantap
Thanks mate if you haven’t got a welder it’s good idea to join metal together
And that's why welders don't talk about it
What a waste of time. I'd be fired if I did that.
Me too. But I’m not a welder.
Get a better job.
☺👍
I had to check if this was an April fools video... It's not....
Ok this actually brought tears to my eyes.weird
There are many ways of cracking an egg. An ideal joint for brazing. Thanks for posting
Mantap....tp klamaan...tu
Klw butuh yg kuat...OK 👏👍
رائع جدا جدا
Mantaap
Hello cuanto te dura la carga de la esmeriladora ??
Well theres 4 minutes of my life I won't get back.
Make like him more solid because if you weld after cleaning the attachments for the two pipes, they are very precarious and risk to move.
there are a lot of these stuff my welder does not talk to me about
What would you use this for?
I think for stands that require portability. Something you can quickly assemble for a job. You'd see this trick for painters or builders that can put together a large stand that would be good for a project then broken down for portability to the next project.
It's stronger to put another tube inside....
good
😍
Ich dachte immer Schweisser reden nicht weil die ohne Stimmbänder geboren werden. Dank dir kenne ich nun die richtige Antwort!
Danke!
Une usine à gaz et beaucoup de temps pour rabouter 2 tubes!!!
CARREMENT! Une cornière;2 serres joints >< Ca peut par contre être pratique si le poste à souder tombe en panne par contre : tout est bon à prendre,faut juste savoir faire le tri.Bien à vous.
Holy Gloves 💥 Batman
Finally we see,.why welders don't put it on you tube... because it's of no use
Nice!
😮😮😮👏👏👏👏👏👏...
I don't know, but that seems like a good idea for me. I have a grill that sits too low... Adding a few inches will work perfect for my height
Oh, fuck with the hell yeah!
Супер
I’ll get the boot if i didi this in the shop.
👌👌👌👌👍
Toi bien parlerai le France !
We dont talk about it cos noone in there rite mind in my trade would do it ya gronk
‘Cause
No one
Right
Spelling errors. Make sure to check that!
@@__ok. im aussi i can get away with it 🤣🤣🤣🤣
Mitch Noyes it just adds character, I read it in an aussie accent in my head right away.
I'm a welder and dont want to be that guy, but the correct way to spell it in this situation is (their) not there.
Your gloves are in the same state as mine 😂😂😂
Its from flex xD 👊🏻🍻🍻
I feel you. I wish you'd see mine
Kating super sar
Waste of time. Sleeve it, weld it. Why bolt it if you're going to weld it.
My thoughts exactly, I'm no professional welder far from it but the minute I seen him punch holes and drill I was like why bother 🤯
@@michealmcelchar2565 right. Just ridiculous
Well like this it wouldn't need a sleeve, kind of an inner sleeve that becomes welded through and over the gap. Source: 20 years of software development experience.
I figured he was gonna weld the seam. When he started drilling I assumed he was going to just drill through the outside and do spot welds. Pretty much slugging the tube, but then he went rogue.
Maneiro
Siap bosQu,,,,good,adakah orang Indonesia yang hadir di sini,mana suaranya,,,,😁😁😁🖐️🖐️🇮🇩🇮🇩👍👍👍
Мог бы не ставить болты, а просверлив верхний профиль сварить с нижним как и шов...
Bien
Hãy cho tôi thấy cánh tay của các bạn đến từ Việt Nam với ạ.
Legal
I get it...another way of joining same size square tubing - if you refuse to weld it, or your welder is broken, or...??
Track to the studio!!!!!!
Why do welders not speak of it? Cause it takes a shiz load of time, welding it out and grinding it flush even would take less time and end up with a better looking result
Yeh but how you going to unbolt a weld? Clearly this is made to be something that gets taken on and off, its a ghetto slip joint.
Dale Neish Welders use welds to build things, not bolts. The title of the video makes it seem as if it’s some hidden trick that welders avoid. Welders make things permanent
@@spudatbattleaxe what you've never made something that bolts on, its fabrication.
@@spudatbattleaxe o
To su cevi 40x40mm,u njih idealno ulazi cev od 35x35mm,lakse bi bilo da si ubacio cev u cev i zašrafio
Majstore, nastavlja se cijev istih dimenzija
It's tube not pipe cut both ends at a 45 and sleeve the inside and don't forget to drill a few holes for rossetta weld's
If you in the jungle that's very recommended Sir...thank you
Whats the point? I didn't get it.
splice connections?
AL GA zakomplikova izbusis po 1 rupu kroz obadva profila i sastavi ih i onda 2 plocice sa strana isto tako i ubaci sarafe 😁
bagus
Welders don't talk about it because it's a backyard back that doesn't provide strength.
no idea why you think this is clever ................
bring him views
He's indian
Sao không chấm hàn...nó chắc chắn hơn là bắt ốc. 🐚. Vĩnh Long.