Bought the exact brand back in 2017...Still have it on. One downside is the threaded post on the bracket...it breaks off after a while (even if you’re careful tightening the nut). Since having it, I’ve had 2 snapped off. I’ve been using super glue to reattached each threaded post. I did purchase a set of the brackets (approx. $40 plus shipping) and yet to replace the two that snapped off. Something to keep in mind. Overall, it is a nice product and makes the S550 look great!
I want to put that sealant on the brackets but I did not receive it with my Louvers. Is it just the 3M Clear Super Silicone Seal? My friend said that was the one but I want to make sure.
the one I ordered off anyone doesn't have any nuts or washers, just the adhesive 3m tape already on it. Like, I guess it's just a glue on kind of louvers but Idk
These guys will not for a 2010-2014 model Mustangs, I highly recommend you check out our website for all available options for your specific application! -Zach
The brackets are held onto the rear windshield using 3M Automotive Tape, which can be removed with some heat. Like Travie said, a heat gun (even a hair dryer) can do the trick. So not permanent! -Adam
I *highly* recommend letting the brackets and 3M adhesives cure for a full 24 hours in warm temperatures to ensure they adhere properly. If you don't, you may end up losing your louvers going down the highway. -Zach
Shop this MMD ABS Rear Window Louver: muscle.am/2lArLUt
Subscribe For New Mustang Videos Daily: muscle.am/SubscribeAMyt
Louvers always look so good on the Mustang!
Louvers are meant for Mustangs!
Absolutely! -Zach
Bought the exact brand back in 2017...Still have it on. One downside is the threaded post on the bracket...it breaks off after a while (even if you’re careful tightening the nut). Since having it, I’ve had 2 snapped off. I’ve been using super glue to reattached each threaded post. I did purchase a set of the brackets (approx. $40 plus shipping) and yet to replace the two that snapped off.
Something to keep in mind.
Overall, it is a nice product and makes the S550 look great!
I want to put that sealant on the brackets but I did not receive it with my Louvers. Is it just the 3M Clear Super Silicone Seal? My friend said that was the one but I want to make sure.
the one I ordered off anyone doesn't have any nuts or washers, just the adhesive 3m tape already on it. Like, I guess it's just a glue on kind of louvers but Idk
can i put it in a 2011 mustang
These guys will not for a 2010-2014 model Mustangs, I highly recommend you check out our website for all available options for your specific application! -Zach
I like it!
Installed this louver on my 2016 GT350 and it vibrates around 80mph. Super annoying!!!!
How permanent are louvers if you change your mind months later?
Burt Reynolds it’s just got some 3m tape, a heat gun and adhesive remover will do the job
The brackets are held onto the rear windshield using 3M Automotive Tape, which can be removed with some heat. Like Travie said, a heat gun (even a hair dryer) can do the trick. So not permanent! -Adam
Do you really have to wait 24 hours ? 😂
I *highly* recommend letting the brackets and 3M adhesives cure for a full 24 hours in warm temperatures to ensure they adhere properly. If you don't, you may end up losing your louvers going down the highway. -Zach