Це відео не доступне.
Перепрошуємо.
Вставка
- Опубліковано 6 лип 2016
- **SAMSUNG REFRIGERATOR ICE BUILDUP PERMANENT FIX! ➡️ • How to Fix Samsung Ref...
** GE BY SAMSUNG FRIDGE ICE BUILD UP PERMANENT FIX! ➡️ • How to Fix GE(Samsung)...
GE Profile Refrigerator Manufactured by Samsung Ice Build up Issue. This is One of the Most Common Issues that is Happening with ALL Samsung Refrigerators, Including Refrigerators Manufactured By Samsung.
Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. (By Using them, We do Earn a Small Commission at NO Extra Expense to You) If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.
Refrigerator Heater Clips:
- Amazon ➡️ amzn.to/3Sbqhg7
- eBay ➡️ ebay.us/uBFfhi
- RepairClinic ➡️ bit.ly/3NW4oyM
Mentioned in the Video:
Screwdriver Set ➡️➡️ amzn.to/3NrWZHd
Affordable Drill Set ➡️➡️ amzn.to/3S7M4Fr
Steamer ➡️➡️ amzn.to/47Jrm3v
High Temperature Zip-Ties ➡️➡️ amzn.to/3NXIATo
Electrical Tape ➡️➡️ amzn.to/48roRE0
Wire Cutters ➡️➡️ amzn.to/3vw7gME
Wire Stripper ➡️➡️ amzn.to/41OV0Tx
Wire Nuts ➡️➡️ amzn.to/3SaI9rk
GE Silicone ➡️➡️ amzn.to/3TP5mRl
Refrigerator Deodorizer ➡️➡️ amzn.to/48DggxI
Find Some of Our Faves on Our Amazon Storefront!! ➡️➡️ amzn.to/3xPs2rI
Take Notice that this issue May be created due to a bad defrost thermostat, Bad Thermistor, Bad Heat Element, or a Bad Control Board. Before I figured out that this was the Problem on this Refrigerator, All Major Components Checked Out Okay.
Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk.
**For Parts, We Reccommend RepairClinic - They Offer 365 Return Policy. Visit HERE: www.anrdoezrs.net/click-10023...
Sign up For a FREE 30-Day Trial of Amazon Prime and Get Your Appliance Going Faster! CLICK HERE: amzn.to/3BA7Erj
If this Video Helped you in any way, Consider Leaving a Tip:
- Buy Me a Coffee: buymeacoffee.com/diyrepairsnow
- PayPay: @diyrepairsnow
- Venmo: @diyrepairsnow
Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!
- DIY Repairs Now
**Disclaimer: This Post May Contain Affiliate Links. These are in NO WAY Extra Charge to You, However By Using them, You will be Helping Out the Channel. Thank you!
Thank you for this helpful video on how to repair the fridge. With this video and another I was able to successfully restore the temperature and our fridge is working again. One point I will add for those who are watching the video is you MUST let the fridge thaw out to remove the back panel. It will not come off until you use a hair dryer or heat gun to melt the ice down. We saw water in the lower drawer and some leaked into the freezer. Our fridge was at 59 degrees and the ice build up was coming through the holes in the rear of the fridge. I highly recommend the the extended wire to ensure the water goes down the hole. Thanks again!
Thank you so much. I had been defrosting the sheet of ice under the deli drawer every other week for more than a year before I found this. The installation of a couple of wires into the drain tube to keep it clear is genius and seems to have solved my problem. Thanks again.
Mine has the sheet of ice issue also. I think the fan motor is inoperative on mine. Glad to see where it's location is.
Great video! Very Completed and Helpful. Thanks
Excellent tips man, this is exactly what I needed
Good video. It would have been great if you stated in the beginning what the problem was. Keep up the good work.
🤔Awesome! His video and information Was 100% helpful Replace Shocks on Aman washer 👏👏😎 Thanks so much IjSr.
This is one of the best refrigerator repair videos. Gets right to the point and has several good tips!
You likely saved me at least a $1000 bucks and I don't have toss out a perfectly good refrigerator
Ok first off, thank you....your awesome. I have same issues and getting really tired of the fridge freezing up issue. GE shame on you. (2nd GE) appliance to fail on me in 3 years. Thank you JAKE for posting this.
Agree. GE quality has gone down the tubes. Same issue with ours
I hate ge . Any luck with other brands?
@@postskeetclarity I bought a Maytag to replace out clothes washer that failed in less than 2 years.
@@davidgruver8153 washer and dryer are easy, speed queen all the way, went with the non digital models.... No prob whatsover....
Thanks! Very helpful!
Thank you very much for this video. Finally found out how to fix the drain, and the fan test trick was priceless. Thnx
You’re welcome thanks for watching my video💯💯👍🏻👍🏻
@@DIYRepairsNow Where is the hole up top to drain. I stuck wire in there, place where you ad extra wire, and it feels solid..
Thanks for the complete front and back view of the problem.
Hello, where did you pour the water to come out the back of the unit to see if the pipes were clear? I think my drain tubes may have buildup from my hard water.
Ihave the model PFSS6PKXASS which is very similar, and of course the same type of problem, so I will have to try your suggestions and see if this is the fix! I'll bet it is! Thank you for making the video, I love you tube!
+Hanabi Hut I hope my Video helps you with your repair. Thanks for watching.
Did it work? Mine is doing the same thing
GE Tech here..... this is what i do when i come across this issue. One other thing to consider is replacing the entire fan cover. In severe cases, the Styrofoam insulation becomes impregnated with ice and water. That is an expensive part however....
James Blackwell what would your average cost be for this exact type of job?
Thanks good video
+Sebastian Rodriguez Lancome thanks for comment I'm glad I can help...
Nice vid. How did you pour water down drain line while holding camera?
As I just found out, that back panel may be frozen from the inside so you have to really yank it down. And then my bottom drain tray was also frozen up. Used this. IceSurrender Frozen Water Line Tool (36")
I have this same model with the same issue. I’d like your advice. I found the defrost element was open, so it was replaced. The drain was not clogged. Several months later, same problem of icing. The Defrost element was good this time and no blockage in drain. I bought a new control board from GE/Samsung. It corrected the defrost element problem but the interior lights in fresh food compartment stopped working (freezer light still worked) and the ice maker started ticking and made ice but defrost coil in I/M stopped working. I put back the original board and light came on when I opened door. The I/M still kept ticking and no ice. Any ideas????? Thanks for the vids.
3 years later I’m having the same issue and watching this video again
Me too.
Thanks for the video, I used two zip ties and pointed them into the drain hole, hopefully no more problems
It isn’t sticking something in that hole that helps. The purpose of the metal wires is to use some of the heat off that heater coil go down those wires and into the drain pipe. Plastic zip ties will not carry heat. I think the real problem occurs when that small flapper type valve inside those drain pipe becomes plugged which allows water to back up into the refrigerator. It then freezes inside that drain pipe and the additional water overflows into the refrigerator. Cut the tip of those flapper type devices inside that drain tube he pulled apart that are in the back of the refrigerator. Especially the one on the right that goes to the refrigerator. If the water can no longer back up and stand in that drain tube, it can’t freeze. Mine was brittle and just broke which gave me a much larger opening.
@@feversol yeah, the zip ties did not solve this issue!
GE has a customer no-service department. I was on hold for 1 .7 hours... I finally gave up when the battery went in my phone.
For this fridge have you ever changed the water valve for the water and ice?
The fan motor doesn't come on and the evap. get build up with ice. Whats the problem.? Thanks in advance
I have the same model and my freezer is showing 63 degrees would this be the same issue?
I have this fridge and it's totally dead after a power outage. No lights, no display. Won't run, nothing. Last time this happened, I replaced the main circuit board and that fixed it. This time, no such luck. I'm going to replace the power supply board and see if that works, but do you have any other ideas of what could be the problem?
Defrosted this fridge for 4 days b/c ice has frozen up to the fan. Now I'm not getting any power to anything when plugging in the fridge. What could have happened to cause power to not work now? There's no fuse on the main circuit board, so I'm at a loss. Any ideas? (Not even the front panel or lights are working).
Did you ever figure this out? I'm having the same problem.
my inside cover over drain and fan won't come out together with styrofoam maybe after thawing out overnight it will
how do I check defrost heater in pfss6pkwbss,unclogged frozen drain would like to check defrost heater before re assemble
Michael Holmes check resistance with a meter
How can I find this part - GE WR13X10551 Asm Cover Dispenser. Refrigerator model PFSS6PKWBSS. They don't make it anymore. Is there some off market place I can buy it or a substitute part? How can GE make a $2K refrigerator then just stop making parts for it. Please help...
That my number looks like it’s incorrect double check the model number and send me the correct model number
Is that wire metal?
I am fixing to defrost mine. Concerned about over flow on to floor. Any comments on this? UPDATE: I did defrost mine and it was no problem. Surprised at how little water we collected. Used a suction device to draw out water from pan and none ran over. Teck wants to come back and replace defrost loop. $300+. Already hit me for over $300 for 2 calls. Have new box on way but box has been fine from time of defrost. Found someone who wants it so I am happy. I removed both of caps on drain and water still flows into pan.
The drain tube in the middle that he stuck those metal wires becomes blocked from ice. I believe the solution is to open the rear of the refrigerator and check that flapper like constriction in that tube. It may have become blocked allowing water to back up into the refrigerator where it freezes. Clip the end of those flapper type ends making a larger hole that can’t become blocked from small amounts of rust, etc. Then, the water cannot back up and stand in that tube where it freezes. Mine were brittle from age and the tips broke off so I just reattached them knowing water can no longer become blocked. The wires he attached could be helpful, but if the water cannot back up and sit still right there, it cannot freeze.
What is the material of the wire you put down the defrost drain?
Is just a metal wire, but you can use a drain clip is a link in the description of this video
I wish I could hear your audio...
Refrigerador kenmore dos puertas
I completed this repair and I'm still getting water leaking into the refrigerator. Any other suggestions?
ua-cam.com/video/QUzROdD3eGE/v-deo.html