you state that you use a 1mm allen to replace the trigger shoe? I can’t find any set that has 1mm? 1.5, 1.3 .09 etc are you sure it was exactly 1mm? i don’t want to strip that little screw
My apologies, I looked up the set of wrenches I used and it appears the smallest wrench in that set is a 1.27, not a 1mm proper. The markings on the little plastic holder mine came in were messed up and the .27 wasn't visible. Hope that helps.
I posted the same on your rumble channel .....Hi I am installing the acro p2 adapter plate on my bul sas 2 3.25 comp .....will be using loctite blue 243 medium....can you tell me whats the torque strength I need to use while putting the screws in for the adapter plate ....also if you could recommend a torque limiter for sas 2 ul to do this task thanks
Whose is your contact at bularmory? I’ve tried to discuss with them regarding a magazine issue they have which is causing people to have failure to feeds and stovepipes. I changed out the springs in the mag tube and the issues were resolved, I put back the old springs and the issues came back. Many people are having the same issue. Is there anyway you can speak to someone at bularmory Israel. No one here at bularmory USA takes my commentary seriously.
I just purchased the bul armory 3.25 ultralight using 124 gr. My first and only outing was terrible. After 2mags the third round. My entire gun froze no rnd in chamber . Gun wound not open It was completly non-functional. I call its been in repair for 2 wks. I was a dead man walkin. Unbelieveable chrushed. Reliability is shoot. Awaiting a reply from Bul Armory. Its Unbelievable. God Bless
I really want one of these. I almost talk myself into ordering one every day but I cannot bring myself to carrying a 9mm. Just typing that makes me sick to my stomach.I keep holding out hope that they'll make it in 45cal for the other half of the gun community that shoots big bore pistols.
I'll just leave this right here...:rumble.com/v311zau-july-19-2023.html
Yes thanks and happy new year!
You too brother!
Love mine stock for now.
It didn't need any of the stuff we did to it!
The advantage of having these parts as over the years these models will get discontinued and difficult to get these parts .@@JayLewisFarmStyle
Thanks for the video Jay!
My man!
you state that you use a 1mm allen to replace the trigger shoe? I can’t find any set that has 1mm? 1.5, 1.3 .09 etc are you sure it was exactly 1mm?
i don’t want to strip that little screw
My apologies, I looked up the set of wrenches I used and it appears the smallest wrench in that set is a 1.27, not a 1mm proper. The markings on the little plastic holder mine came in were messed up and the .27 wasn't visible.
Hope that helps.
Where did you find the 1 piece guide rod and spring and the steel firing pin?
Direct from BUL Armory.
I posted the same on your rumble channel .....Hi I am installing the acro p2 adapter plate on my bul sas 2 3.25 comp .....will be using loctite blue 243 medium....can you tell me whats the torque strength I need to use while putting the screws in for the adapter plate ....also if you could recommend a torque limiter for sas 2 ul to do this task thanks
On the screw size/pitch question you asked, I can look into it with my contact at BUL Armory. Did the plate you purchased included screws?
Whose is your contact at bularmory? I’ve tried to discuss with them regarding a magazine issue they have which is causing people to have failure to feeds and stovepipes. I changed out the springs in the mag tube and the issues were resolved, I put back the old springs and the issues came back. Many people are having the same issue. Is there anyway you can speak to someone at bularmory Israel. No one here at bularmory USA takes my commentary seriously.
Love you ❤!
Love you too Gamgam!
I just purchased the bul armory 3.25 ultralight using 124 gr. My first and only outing was terrible. After 2mags the third round. My entire gun froze no rnd in chamber . Gun wound not open It was completly non-functional. I call its been in repair for 2 wks. I was a dead man walkin. Unbelieveable chrushed. Reliability is shoot. Awaiting a reply from Bul Armory. Its Unbelievable. God Bless
Wow! That's the worst experience I've heard of with a BUL!
When you say it froze, do you mean the action couldn't be cycled?
Sooo the $1400+ firearm needs Better Parts ….Cool 😱 🙄…. Another good video Jay !!
The more you spend the more it's worth! Right? Right???
@@JayLewisFarmStyle And the better it shoots LOL…Do they make a 10mm version, I’m ready to buy?!?!
I really want one of these. I almost talk myself into ordering one every day but I cannot bring myself to carrying a 9mm. Just typing that makes me sick to my stomach.I keep holding out hope that they'll make it in 45cal for the other half of the gun community that shoots big bore pistols.
I just put out a CLP review video starring my beloved 1911 in the Lord's caliber 45ACP. Here's the link: ua-cam.com/video/tFaC4YDqGac/v-deo.html