Ps4 UART Blod Ram replacement

Поділитися
Вставка
  • Опубліковано 25 лис 2024

КОМЕНТАРІ • 20

  • @ObsessedGeorge
    @ObsessedGeorge 2 місяці тому

    Great work brother. I have the same issue. My test says DCT 0 is disabled, DCT 1 is disabled. So I need to ask you if the RAMs I replace don't do the trick, then it could be the RAMs on the other side of the motherboard? Or could it be the APU?

    • @Kieltec
      @Kieltec  2 місяці тому

      Check the rams both sides, resistors, capacitors. In my case i usually start by reballing the Apu

  • @phooopy7941
    @phooopy7941 11 місяців тому

    You wouldn't happen to know if one or more 8Gbit (1GB) ram chips would function on a cuh-1100 ps4?
    I mean would the ps4 refuse to boot or would it still utilize the chip as if it was a 4Gbit (500MB) chip and function as normal.

  • @OHENEBA-TECH
    @OHENEBA-TECH 5 місяців тому

    Bro why didntyou start from the beginning like how to solder the points on the PS4 motherboard Uart points

  • @konradbaszczak3675
    @konradbaszczak3675 10 місяців тому

    hello, do you have a link or share the validator, I need it for single use

  • @constantlychangin
    @constantlychangin 6 місяців тому

    Hey could you upgrade the ram with higher capcity without messing too much up? Would you need to upgrade your accompaning componets (capacitors im guessing or not really as long as its gddr4?

    • @Kieltec
      @Kieltec  6 місяців тому

      Yes If the pinout is the same maybe upgrading some resistors will be needed

  • @zaidkadwa1290
    @zaidkadwa1290 6 місяців тому

    did you use a bga stencil to reball the donor chips

    • @Kieltec
      @Kieltec  6 місяців тому

      Yes a standard 0.5 stencil

    • @zaidkadwa2159
      @zaidkadwa2159 6 місяців тому

      ​@@KieltecAnd temperature of your station?

  • @MasterJediSean
    @MasterJediSean Рік тому

    Well done. What is the name of that programming software?

  • @phynx-victumterra652
    @phynx-victumterra652 9 місяців тому

    Any chance you know what would cause every memory channel to come up as disabled in Uart on a ps4 original?

    • @Kieltec
      @Kieltec  9 місяців тому

      Check the fuse close to the fan connector

  • @xx_ars_enic_xx2831
    @xx_ars_enic_xx2831 8 місяців тому

    How did you know which Ram was faulty as the uRt did not tell you?

    • @Kieltec
      @Kieltec  8 місяців тому +1

      repair.wiki/w/Playstation_4_Fault_finding_with_UART

  • @maxtone0123
    @maxtone0123 Рік тому

    Good morning, do you have the link or can you pass that ps4 nor validator 1.8.8 since all the other versions are paid?

    • @maxtone0123
      @maxtone0123 Рік тому

      @@Kieltec Thank you very much for the help but the version is not working and it asks for payment but thank you very much

    • @Kieltec
      @Kieltec  Рік тому

      @@maxtone0123 turn off the internet before using it otherwise it will ask for an update

    • @maxtone0123
      @maxtone0123 Рік тому

      @@Kieltec
      thanks a lot