If you're having this problem and you have fluid in it. You will probably need to look for a leak around your master or slave cylinder. If you do see a leak replace whichever is leaking, then after you replace it, bleed the clutch but pumping the pedal then twist the bleed screw open, catch the fluid, making sure to keep fluid in the master reservoir. Tighten the screw back and repeat the process. If you are unable to find a bleed screw, go to harbor freight and get a hand vac pump. Put the little cone fitting on it and open up your reservoir and locate the hole in the bottom. Stick it into the hole and pump about 15 pounds and let it set while you watch for bubbles of air come through the tube youve inserted. You may need to repeat the steps again but make sure you keep fluid in the reservoir. You you pull the tube out and the fluid rushes in to fill the space where the air bubbles were it could cause you to get more air in the line if you dont keep fluid in it.
If you're having this problem and you have fluid in it. You will probably need to look for a leak around your master or slave cylinder. If you do see a leak replace whichever is leaking, then after you replace it, bleed the clutch but pumping the pedal then twist the bleed screw open, catch the fluid, making sure to keep fluid in the master reservoir. Tighten the screw back and repeat the process. If you are unable to find a bleed screw, go to harbor freight and get a hand vac pump. Put the little cone fitting on it and open up your reservoir and locate the hole in the bottom. Stick it into the hole and pump about 15 pounds and let it set while you watch for bubbles of air come through the tube youve inserted. You may need to repeat the steps again but make sure you keep fluid in the reservoir. You you pull the tube out and the fluid rushes in to fill the space where the air bubbles were it could cause you to get more air in the line if you dont keep fluid in it.
Today i have same problem fluid is full but not taking gear can you help me thanks
Where you able to fix it i have the same problem
Thank you so much I've got my truck back
You’re welcome
Thank you it worked great! 🙏
Thank you!!
No problem bro
What model truck do you have?
2013 Volvo vnl with a Cummins isx 15
Thank you
You’re welcome
Where is this fluid tank located bro?
Under the hood on the driver side
Not all trucks have that fluid fyi
I Judi