Baby Seat Installation Tutorial | Everything You Know Need To Know | Drive.com.au

Поділитися
Вставка
  • Опубліковано 3 жов 2024

КОМЕНТАРІ • 7

  • @samartz
    @samartz 2 роки тому +1

    Thanks for demonstrating on a prado! My next car

  • @lyonnaise6395
    @lyonnaise6395 11 місяців тому

    Thank u so helpful!!!

  • @PK-gs3xo
    @PK-gs3xo 2 роки тому +1

    Very useful

  • @BabyDriveReviews
    @BabyDriveReviews 2 роки тому +2

    👋

  • @teianajames2215
    @teianajames2215 Рік тому

    Do you always have to use the top tether straps in Aus?

    • @Drivecomau
      @Drivecomau  Рік тому

      A top tether is a legal requirement for all child seats in Australia, both ISOFIX or seatbelt-secured. These must always be used and correctly adjusted.

  • @RhiannonPellegrino
    @RhiannonPellegrino Рік тому

    So many incorrect info in this :/ headrest bottom should be level with ear lobes as shoulder straps need to be coming from at or above the shoulders in rear facing mode, in forward they can dip up to 2.5cm below shoulders only if the next slot is too high. Headrest should never touch the shoulders! Also adjust the headrest/straps BEFORE tightening the harness, as lowering it once tightened causes the harness to become loose, also a good idea to use a locking device for the seat belt so the seat stays super rigid in place. Gah, no wonder so many people get car seat use wrong with videos like this misinforming everyone 🤦‍♀️🤦‍♀️