ENGINE SWAPPING A ROKON FOR MORE POWER

Поділитися
Вставка

КОМЕНТАРІ • 104

  • @3dconceptsofutah757
    @3dconceptsofutah757  Рік тому +5

    Should you swap engines on a Rokon? Probably not! But it's more fun doing stuff that shouldn't be done don't you think?

    • @user-ss7jr3bt9w
      @user-ss7jr3bt9w Рік тому

      hi.why do you need more speed?increase the speed, the thrust will decrease. on my 2*2 motorcycle, the maximum speed is 45 km per hour.in the mud or in the snow, you won't go at this speed)🤝

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      @@user-ss7jr3bt9w By swapping motors it has more speed and just as much torque. It's what the owner wanted. I'm just the mechanic...

    • @tylersowell7460
      @tylersowell7460 Рік тому

      @@3dconceptsofutah757 do you think with the some mods to the 212 it could make it up to 45? I tinker with mini bikes all the time so I would imagine if it's doable on a Coleman it's doable on a rokon

    • @3dconceptsofutah757
      @3dconceptsofutah757  8 місяців тому

      The Rokon has a lot of drag with the front wheel drive mechanism so it would take a lot of power but maybe. The bike is also really unstable at about 35 so I don't know if you would want that​@@tylersowell7460

    • @premierstorage6973
      @premierstorage6973 3 місяці тому

      I live up in Kamas and have a rokon that I’d like to switch the motor out. Any interest in doing this?

  • @randallburgess46
    @randallburgess46 Рік тому +4

    Great idea and custom fabrication work! You could patent an entire engine swap setup for Rokons and sell them. I’m sure a lot of people who love these things would love to install all the components you put on your bike too! Great idea!

  • @AerialAcesRC13
    @AerialAcesRC13 11 місяців тому +2

    Between the foggy mountain view, and the super clean Rokon build, you are living another mans DREAM! beautiful! ❤ Great content, and earned a sub, bc we would sure like to see what you get up to next! Attention to detail is top notch! Keep up the great work!

  • @linusmadrone
    @linusmadrone 7 місяців тому +1

    The only one that I ever saw had a commonly used 2 cycle motor probably around 80 cc. Low to midrange power, no high end porting I have the same motor in My antique Terrel chainsaw

  • @pokeyman2003
    @pokeyman2003 Рік тому +3

    This guy is crazy.........crazy awesome. Nice work ADawg.

  • @MasterSumai
    @MasterSumai 5 місяців тому +1

    Awesome upgrade !! If I buy another one, I want you to do the emgine upgrade on it !! If I get another one it will be the, I believe the 1969-ish Rokon Trail Breaker . The big Yellow One .

    • @3dconceptsofutah757
      @3dconceptsofutah757  5 місяців тому

      Thanks for your kind words! Are you in Utah?

    • @MasterSumai
      @MasterSumai 5 місяців тому

      @@3dconceptsofutah757 You're Welcome! No, unfortunately I'm not in Utah. I live in Pennsylvania. 🤫😔

    • @johnkovitch550
      @johnkovitch550 22 дні тому

      @@MasterSumaiI live in Pa and just bought mine. I’ve be looking at them for 25 years, never thought I’d own one. I bought a 2018 that the man sold me for $2500! It looked pretty narly, but it was only dirt and grease, with weird home made rack on the back that I removed. Turns out after just cleaning it up? It’s like new, nubs still on the tires , it’s in mint condition, he said it had low miles. Trail Breaker hunter addition.

  • @metamorphicorder
    @metamorphicorder 10 місяців тому +1

    For those talking about they thought rokons were faster than this?
    This is the off road edition. What he has basically done here is turned this into the on road version. The ranger.
    That one is set up to be faster. About 37 mph. And thats about as fast as you want to be on one.

    • @3dconceptsofutah757
      @3dconceptsofutah757  10 місяців тому +1

      Thanks for clarifying that! I didn't know that. This was a customer vehicle so I didn't have a lot of background on the different models.

  • @3006mgk
    @3006mgk 3 місяці тому

    Why Rokon hasn't figured this out is unbelievable

  • @davidwrobel8089
    @davidwrobel8089 Рік тому +1

    40 miles per hour would have been the icing on the cake.

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      Maybe gearing up would be good because it has more torque to pull a higher ratio now. First gear wood still be low enough to climb anything

  • @trihall2273
    @trihall2273 11 місяців тому +1

    Sweet... Heading to n Idaho in the morning. With a 2022 trail breaker🎉

    • @3dconceptsofutah757
      @3dconceptsofutah757  11 місяців тому

      Happy trails!! Let us know how it goes

    • @funkysawmanwright5077
      @funkysawmanwright5077 11 місяців тому

      Might see you. Logging all over up here now, st joe, coeurdlanes, priest lake and north east of Bonners ferry

  • @mrlariata9290
    @mrlariata9290 10 місяців тому +2

    Awesome video cool, swap, beautiful mountains. What area is that?

  • @TEC_Stuff
    @TEC_Stuff 5 місяців тому

    The OEM jetting in your Rokon may be set up for Sea Level. At that elevation in Utah (as you stated in reply in the comment section), I would guess your carburetor needed a change in jetting to compensate for the elevation of being around 1 mile high in altitude. This may also be the case with your swapped in engine too. Also, lube those front drive chains, that’s got to be a lot of friction at top speed.

    • @3dconceptsofutah757
      @3dconceptsofutah757  5 місяців тому

      Thanks for sharing your ideas! Yes it has the stock jetting rated for about 6k elevation. The high elevation jet seemed too lean.

  • @kenferguson3349
    @kenferguson3349 11 місяців тому +1

    Mine has the same Tillotson 212 electric start, but I took a different route for more speed. The Rokon DOT Ranger version has smaller(faster) wheel drive gears, I got them from Rokon but they are a common "industrial" type gear. To increase top end drive RPM I installed a larger Comet Series 40c Magnum clutch (209709a), and a (209133a) driven clutch. The 40c clutch has adjustable weights for tuning the response, a wider stronger belt, and with the 209133a 2nd clutch provides an even lower bottom ratio AND a considerably higher high-end ratio. Basically the clutch provides increased RPM for speed instead of spinning the engine faster. The engine: I wanted low RPM torque to preserve the Rokon's ultra slow crawl ability. Stock cam, add 2nd charging coil to double output, very minor porting to clean up/smooth, Tillotson TCT or TFB mechanical fuel injection carb(smooth running low end). I used a 1 1/8 (cheap "performance") exhaust pipe, but I might try the stock one (and tct carb) to see if it works better at lower RPM.

    • @3dconceptsofutah757
      @3dconceptsofutah757  11 місяців тому

      Sounds like a great setup! If I could start over I'd do the same thing

    • @mgreenst5479
      @mgreenst5479 9 місяців тому

      Would you consider upgrading my 19' Rokon mototractor?

    • @3dconceptsofutah757
      @3dconceptsofutah757  8 місяців тому

      If you could get it to Utah!

    • @3dconceptsofutah757
      @3dconceptsofutah757  8 місяців тому

      Thanks again for your advice! Is the tfb a bigger version than the tct?

  • @keenanmagoon913
    @keenanmagoon913 Рік тому +1

    I live in Utah as well. Awesome work on that engine swap. I just bought an 86 Rokon that has a Predator 224 but the exhaust needs to redone. Let me know if you'd be interested in helping me with that.

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому

      Hey! What city are you in? send me an email @ 3dconceptsutah@gmail.com

  • @mlindsay527
    @mlindsay527 Рік тому +2

    The Kohler probably just needed the throttle cable tightened;)

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      That is possible but it seemed to rev to it's limit. The way the throttle is connected with a little ferrule screwed into the cable is pretty sketchy for a production machine! Thanks for the comment!

  • @kloss213
    @kloss213 Рік тому +2

    the drive unit in frame wont handle much extra power

  • @izzlate
    @izzlate Рік тому +2

    That's sick! Very well done swap!

  • @alittlebitofmary
    @alittlebitofmary 3 місяці тому

    Wow. That blows my mind that you can swap out engines like that 🤣 Cool vid

  • @alaskacutthecord769
    @alaskacutthecord769 Рік тому +2

    Love your video. Ours was a lot more work to put a 125cc Honda for sure.

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому

      Thank you! So your's has a shifter now? I really think this should have just had a normal motorcycle engine to start with! Do you have a video?
      Cheers!

  • @anthonypushruk2586
    @anthonypushruk2586 10 місяців тому

    That's an idea swapping engines however also on UA-cam their's a Russian version of 2wd but the clocked that tractor going 46mph top speed. Just that I point that out. I like the mods.

    • @slickwillyforpres
      @slickwillyforpres 10 місяців тому +1

      That was 46kmh. Kilometers per hour. 46kmh equals 28mph. I just watched that video yesterday. It was on the Balt 2x2.

  • @mikeskidmore6754
    @mikeskidmore6754 11 місяців тому

    You need a Snorkel air cleaner under or above the seat .. Grit goes right through K&N air filters with water splash .

  • @wlogan0204
    @wlogan0204 Рік тому +2

    needs to be busa swapped

  • @whatsinanamethatthecaptive577
    @whatsinanamethatthecaptive577 Рік тому +2

    I have seen mod kits for the Kohler engine: billet flywheels and cams. Remove the governor and if (I say if) it can rev to 5000 is should go close to 50mph. Can 3D concepts try this?

  • @pelewads
    @pelewads Рік тому +7

    The rokon transmission has three gears. If you could only get it up to 20 miles an hour, you probably only had it in second dear. It's supposed to go up to 35

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      I rode it quite a bit to familiarize myself with it before the engine swap. Not to say there wasn't something wrong with it but it was definitely in third gear. There's no question about that. There may be some drag in the transmission that's limiting the top speed though.

    • @scottburgle2169
      @scottburgle2169 11 місяців тому +2

      I owned a 2002 Rokon….the sales ads say they go 35mph. The truth is mine only went around 23rd h in 3rd gear(gps’d)

    • @uprebel5150
      @uprebel5150 10 місяців тому +1

      I own a 1967 2-stroke. It goes a whopping 21 mph in 3rd gear. Would love to do an engine swap just for the noise reduction.

  • @trihall2273
    @trihall2273 11 місяців тому +1

    And a 1988 bw 350

  • @davecaresforyou7606
    @davecaresforyou7606 8 місяців тому

    Turbocharge makes it easier!

  • @shanerr857
    @shanerr857 11 місяців тому +2

    bruh sick video

  • @Iowa599
    @Iowa599 11 місяців тому +1

    Next time do a V-twin swap 8)

    • @3dconceptsofutah757
      @3dconceptsofutah757  11 місяців тому +1

      That would be awesome ;-D There is barely enough room for this engine though!

    • @Iowa599
      @Iowa599 11 місяців тому

      @@3dconceptsofutah757 just stretch the frame a little

  • @TheCenterSpirit
    @TheCenterSpirit 8 місяців тому +1

    how can i get in touch with you for a similar mod to my rokon? im very interested actually.

  • @jamesglode7171
    @jamesglode7171 Рік тому +1

    can you still throw it down into the river and float across to the other side and then ... will it restart ... thats what i would like to know , please ?

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      The carb and everything still breaths from the same point so it still should work the same. The owner has it back now.

    • @jamesglode7171
      @jamesglode7171 Рік тому +1

      @@3dconceptsofutah757 thank you for taking the time to answer me and nice job on the rokon.

  • @JeffDakota-in8hw
    @JeffDakota-in8hw 3 місяці тому

    I have a 2014 Trailbreaker I bought from the factory. Mine goes 35 mph and it's stock. I'm not sure why yours was only doing just over 20 mph max.

    • @3dconceptsofutah757
      @3dconceptsofutah757  3 місяці тому

      Apparently there are a couple different models, this one is geared down.

  • @jp3eku
    @jp3eku 9 місяців тому

    Who wants to go fast on a Rokon? You should focus on building a anti-foaming beer holder for it! I'd definitely buy one from you!

    • @3dconceptsofutah757
      @3dconceptsofutah757  9 місяців тому

      Yeah it's way sketchy at high speeds 😆. The owner was just tired of not being able to keep up with his normal dirt bike friends I guess...

    • @MasterSumai
      @MasterSumai 5 місяців тому +1

      ​@@3dconceptsofutah757Rokons where never really built for high speed. Their name originally was called the TOTE GOAT. They'd climb hills like a mountain goat and tote about 3,000 lbs. My family owned 2 of them from the late 60's to early 70's. The Big Yellow One & one Blue one.

    • @johnkovitch550
      @johnkovitch550 22 дні тому +1

      Good point, why do you want to go faster on a Rokon

    • @johnkovitch550
      @johnkovitch550 22 дні тому +1

      Good point, why do you want to go faster on a ROKON

  • @whatisrealwtf
    @whatisrealwtf Рік тому

    makes me wonder about the new engine? Kohler is a reliable engine not much can kill them save for no engine oil... Wonder if the Kohler can be tweeked for an upgrade.

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому

      Yes I later found parts for the Kohler. Way more available for Honda clones though

  • @adambatchelder4121
    @adambatchelder4121 11 місяців тому +1

    If you have ever ridding a real bike and a rokon you probably know the chassis and lack of suspension and brakes and crazy torque steer are the first limitations Offroad. More power will just brake the little 1/4" roll pins that already brake stock.

    • @3dconceptsofutah757
      @3dconceptsofutah757  11 місяців тому +1

      Yes it is a way awkward machine and I made sure my client knew things might break with more power but he wanted to do it anyway ;-D It's not really a raging monster even with twice the power. I'd personally rather have a WR450 but there is a bike for every person. I think of these things like a crawler on 2 wheels.

  • @joshuasuriner7605
    @joshuasuriner7605 Рік тому +1

    Put a different main drive sprocket on...

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      Definitely could. It has a good balance of torque and speed now. The owner was really happy with it when he rode it

  • @neoaliphant
    @neoaliphant 8 місяців тому +1

    is it still amphibious?

    • @3dconceptsofutah757
      @3dconceptsofutah757  8 місяців тому +2

      Same as stock, you can't submerge the intake

    • @neoaliphant
      @neoaliphant 8 місяців тому

      @@3dconceptsofutah757 could you add a small outboard, or mod it to have a propeler, bit like the shaman or argo...

  • @badas45
    @badas45 Рік тому

    Very cool

  • @MrRobb-hb7lz
    @MrRobb-hb7lz 11 місяців тому

    would like to make mine an electric? anyone have the skills to do that? I'm in North GA.

  • @mikeskidmore6754
    @mikeskidmore6754 11 місяців тому

    I see Mountains in the Background what Altitude are you at? A naturally aspirated motor loses 40% power at 10,000 feet..

    • @3dconceptsofutah757
      @3dconceptsofutah757  11 місяців тому +1

      We're at 5k

    • @mikeskidmore6754
      @mikeskidmore6754 11 місяців тому

      @@3dconceptsofutah757 Your power is down 20% then . I see ROKON sells a jet for 10,000 feet 5,000 feet and one for closer to sea level

    • @mikeskidmore6754
      @mikeskidmore6754 11 місяців тому

      @@3dconceptsofutah757 I see the older ROKONS had a West Bend 2 stroke .. It was a detuned Go Cart Engine.. Later purchased by Chrysler Industrial .. called a Bee now days.. It would be fun to install a two stroke ..
      Better yet a Honda with a 4 speed trans and centrifugal clutch ..

  • @lars-gunnarronnkvist5116
    @lars-gunnarronnkvist5116 Рік тому

    👍

  • @mavrick211
    @mavrick211 9 місяців тому

    Guys like should you do this to your ha ha ha
    If I could do all that I’d have all kids of one off stuff

  • @jjjsmith2497
    @jjjsmith2497 4 місяці тому

    Loose the background music…i can almost hear what your saying

    • @3dconceptsofutah757
      @3dconceptsofutah757  4 місяці тому +1

      Thanks for the feedback. Unfortunately I can't edit posted videos

    • @jjjsmith2497
      @jjjsmith2497 4 місяці тому

      @@3dconceptsofutah757
      Had no idea.Thank you

  • @nokandu5684
    @nokandu5684 11 місяців тому

    So nice when the stupid music stops.

  • @metamorphicorder
    @metamorphicorder 10 місяців тому

    So you call it a gutless wonder and then immediately show it being anything but.

    • @3dconceptsofutah757
      @3dconceptsofutah757  10 місяців тому

      Plenty of torque in low gear but very little horsepower for get up and go ;-D

  • @yooper7753
    @yooper7753 Рік тому

    Ruined the ROKON! Probably won't climb a lady bug now.

    • @3dconceptsofutah757
      @3dconceptsofutah757  Рік тому +1

      It climbs a lot better now. Even in 3rd gear. 2nd is the sweet spot though

    • @derrickwoods2803
      @derrickwoods2803 Рік тому

      How did he ruin it? Those things won't go fast enough to be able to take your feet off the ground damn sure won't climb a hill in anything over first gear

  • @anthonypushruk2586
    @anthonypushruk2586 10 місяців тому

    That's an idea swapping engines however also on UA-cam their's a Russian version of 2wd but the clocked that tractor going 46mph top speed. Just that I point that out. I like the mods.

    • @slickwillyforpres
      @slickwillyforpres 10 місяців тому

      That was 46 kmh. Kilometers per hour. 46kmh equals 28mph. I just watched that video yesterday. It was on the Balt 2x2.