9-Inch Band Saw Review (WEN)

Поділитися
Вставка
  • Опубліковано 20 жов 2024

КОМЕНТАРІ • 33

  • @newbiecraftsman3107
    @newbiecraftsman3107  3 роки тому +7

    I would like to add a comment about the saw. After a good amount of use I realized it’s good for small projects... but anything more than 3/4 inches and you will find that it under performs. It’s not powerful enough to cut through hardwoods and has trouble with anything larger than 3/4 inch. Felt like my viewers should know that to set expectations.

    • @rjhyden
      @rjhyden 3 роки тому

      I bought this one to see how i liked using one. I didn't expect it to be more than what it is. It has shown me that a 500 buck and up unit is in my future.

    • @brettfalgoust1596
      @brettfalgoust1596 3 роки тому

      How accurate is the blade drift? Can you make 6-12” cuts against the fence and have a nice flat glue surface edge?

    • @732brudder
      @732brudder 2 роки тому

      @@brettfalgoust1596 not at all. Drift is really bad on this saw. At least wirh the stock blade. Haven't tried a aftermarket higher quality blade

  • @hueybui
    @hueybui 3 роки тому +2

    Thanks for sharing your experience with the band saw! Awesome to see you involving your Daughter in wood working, got two Girls myself.

    • @mlmccollum100
      @mlmccollum100 3 роки тому

      I actually supervised my daughter building our 3d printer...she loved helping get it started...

  • @rem45acp
    @rem45acp 2 роки тому

    How loud is this when cutting wood? I live in a community area and want to keep the noise levels reasonable, if it's no louder than a blender I'll probably pick one up

  • @Yetireacts419
    @Yetireacts419 4 роки тому +2

    Hey so I have the same saw ,can you do a video on how to adjust the barring ? For some reason both of my bearings sit off center . I want her the guy last name snodgrass and how he adjust the barring and I'm not sure if it's my saw or if I'm not doing something correct . This is my first time working a band saw of any kind ever ☺️ so if you could take a look at the barrings on your saw that would be very helpful thanks . And good video for the unboxing

    • @mildyproductive9726
      @mildyproductive9726 4 роки тому +2

      The rear thrust bearings? If the blade sits on these rear ball bearings slightly off center, don't worry about it. If the blade wears a line in the surface of the bearings, you can unscrew and flip the bearings to get a new surface.
      If the blade sits way too close to the right side of the thrust bearings where it can potentially slip over the side, you can unscrew the bolts holding the bearings, then add a washer under the bearings to shim them farther out to the right. If your blade sits too close to the left side of the bearings, then you're kinda up a creek. But you're more likely to have the former problem. They're gonna be fabbed to err in this direction, on purpose.
      You can drill a hole in the side of the lower cabinet, so you can stick the allen key in there to unscrew only the lower thrust bearing. That will save you from having to remove and reinstall the entire lower guide assembly. Kinda like the factory hole that's there so you can unscrew the entire lower guide. Just add another hole.
      The side guides are adjustable left/right. The blade won't sit exactly in the center of the side guide arms, but that's totally ok. The Wen bandsaw is built to a budget. It's built to work perfectly, not to look perfect.

    • @Yetireacts419
      @Yetireacts419 4 роки тому +1

      @@mildyproductive9726 thanks for the reply

  • @bobjohnson6131
    @bobjohnson6131 3 роки тому

    i'm looking to get my first band saw. Should i get 3939t or 3959t? Its mainly for woodcutting and foam hobby

  • @lcainformatica745
    @lcainformatica745 2 роки тому

    *Making a hardwood fence for the miter makes all the difference **MyBest.Tools** Tune the saw with a combination square. Adjust the laser so its in line. See the photos.Every part in this saw is adjustable.*

  • @Wrenchesandboards4u2u
    @Wrenchesandboards4u2u 3 роки тому

    Awesome video I just ordered one one amazon. Thankyou for sharing.

  • @rayrainer985
    @rayrainer985 2 роки тому

    I am having a hard time finding this bandsaw locally. I hate to order stuff like this. I wonder how this compares to the Shop Fox 9 in. Benchtop Bandsaw Model #W1878. I can't get this bandsaw and considering the Shop Fox bandsaw which is more expensive. HomeDepot has it now for $289 which is more than this Wen bandsaw but manageable. I can't find a review of the Shop Fox w1878.

  • @rjhyden
    @rjhyden 3 роки тому +1

    Would love to hear advice on a new blade for mine. I just got mine a couple weeks ago and have been cutting out axe handles from green Hickory and Pecan and feel the blade is going dull. It seems to wander a bit too. I really like it and am sure it will lead to a bigger and better unit.

  • @brettfalgoust1596
    @brettfalgoust1596 3 роки тому

    I bought it for small projects. Have a few small pieces of purpleheart to trim (3” long cuts 1” thick) do you think it won’t work for this?

    • @sflagg0817
      @sflagg0817 3 роки тому

      Brett i just watched a video from Matt on 731 woodworks on this very saw he was actually cutting a slab of many different hardwoods including purpleheart he also has a great channel the cutoff piece was from a cuttingboard

  • @simpleminded5215
    @simpleminded5215 3 роки тому +1

    Man, this is the third or fourth video I’ve seen that quotes the price as $120.00. Best I can find is $168.00. Maybe it has gone up $40 in a very short time or you found it on sale. Guess I’ll keep an eye out for the $120. Thanks for the video.

    • @rustywp
      @rustywp 3 роки тому

      Mine was $130, they have another model around $165-$175

    • @simpleminded5215
      @simpleminded5215 3 роки тому

      @@rustywp thanks. I’ll have to search a bit harder for the savings.

    • @newbiecraftsman3107
      @newbiecraftsman3107  3 роки тому +1

      Looks like it’s 136 dollars now. WEN 3959 2.5-Amp 9-Inch Benchtop Band Saw www.amazon.com/dp/B077QMBTLP/ref=cm_sw_r_cp_api_glt_fabc_7H1EK46YYX0NGN7FWFWN?_encoding=UTF8&psc=1

    • @tulioalopez
      @tulioalopez 3 роки тому

      I just got it for 136.00

  • @peterbrill1017
    @peterbrill1017 3 роки тому

    Never use a fence with cross cuts... Kickback heaven

    • @Eric-zs6rd
      @Eric-zs6rd 3 роки тому

      This is a 2.5 amp band saw

  • @fredsmith6324
    @fredsmith6324 2 роки тому

    good vid, but we'd like to hear what it sounds like.

  • @jeffoldham3466
    @jeffoldham3466 3 роки тому

    what is the model number of this saw and what size blade is this

  • @paulhease1007
    @paulhease1007 6 місяців тому +1

    Nobody wants the music. Its a distraction. Please?

  • @jjungle1674
    @jjungle1674 4 роки тому +2

    I was in this vid

  • @petra3049
    @petra3049 2 роки тому

    How loud is this guy?

  • @MrLeram12
    @MrLeram12 3 роки тому

    Bet you couldn't do it without your little helper.

  • @TheDuttonExperience
    @TheDuttonExperience 5 місяців тому

    Bro it's not heavy at all.