thank for your advise. the point of 4K with low bitrate is that OpenIPC UltraSight could encode and record 4K video onboard sdcard directly. I think that this feature shows possibilty of recording high resolution video onboard and sending lower resolution video to groundstation in future. And I have tested OpenIPC cameras with low bitrate 4096 in majestic.yaml. this bitrate shows best stable latency 60-80ms in 720p with my setting. so I tested this bitrate on 2K, 4K, too. I'd likely to test in high bitrate, but I think it would show more latency or gliches on video.
They are compatible on Air unit and Ground station. So, you could use EU on air unit and AU on GS. I use composit RX with AU, BU, EU on GS. but AU is installed out of box in OpenIPC firmware, otherwise EU is needed to install driver manually.
@@DtheG_FPV thanks for the confirmation. By the way I asked this same question from the telegram group and got a confirmation. One more thing how did u configure m1 mac to use monitor mode on 8812 ? is it Asahi linux or other distribution or maybe x86 emulation ?
cool, but what's the point of 4k with low bitrate? 1080p with a high bitrate will be much more detailed than 4k with a low bitrate
thank for your advise.
the point of 4K with low bitrate is that OpenIPC UltraSight could encode and record 4K video onboard sdcard directly.
I think that this feature shows possibilty of recording high resolution video onboard and sending lower resolution video to groundstation in future.
And I have tested OpenIPC cameras with low bitrate 4096 in majestic.yaml. this bitrate shows best stable latency 60-80ms in 720p with my setting. so I tested this bitrate on 2K, 4K, too.
I'd likely to test in high bitrate, but I think it would show more latency or gliches on video.
is 8812eu2 and 8812au compatible ? or it should be same modules on both ends ?
They are compatible on Air unit and Ground station.
So, you could use EU on air unit and AU on GS.
I use composit RX with AU, BU, EU on GS.
but AU is installed out of box in OpenIPC firmware, otherwise EU is needed to install driver manually.
@@DtheG_FPV thanks for the confirmation. By the way I asked this same question from the telegram group and got a confirmation. One more thing
how did u configure m1 mac to use monitor mode on 8812 ? is it Asahi linux or other distribution or maybe x86 emulation ?
Ok. I replied on telegram group. check it😁