i have 3 guitars with Sustainer system. A Reverend, a Burny and a Jackson. Each one sounds different, with squeal even without touching the strings... with or without sustain depends on the volume... I didnt know that the sittings, that u show , were possible. I will try to make them sound better...but this needs a lot of time and patience.
If you have three trim pots, try turning the middle one down until the squeal stops. I think some models have two trim pots. It should be the one towards the middle.
Conclusion: Buy your HellRaiser direct from Schecter or an authorized dealer so that it comes with a lifetime warranty. Their warranty says, "Your new Schecter instrument is warranted to be free from defects in materials and workmanship for the life of the original owner". I'd be requesting that my Hybrid be tested before shipping as well if bought from a authorized dealer like a guitar shop.
@@RiffMusic1970 Still appreciate you sharing your story so that guys like me about to purchase a new Schecter w Sustaniac are aware of how best to handle their purchase. Respect bro.
I bought a Schecter banshee and tried doing what you're doing and couldn't get anything but horrible noise. So i ended up ripping the entire sustainiac system out and replacing it with a custom Odezza pickup. John from Odezza hooked me up with everything needed to put it back together, cloth wrapped wire, pots, selector switch, two coil switches and two schematics if i wanted coil split or coil tap. Those sustainiac pickups SUCK!!! I left the sustainiac system completely assembled except for the pickup wires and battery wires so i could sell it but couldn't. Anyone wanna buy a complete sustainiac system? Oh ya, i had a problem with tht neck pickup and i think the D string being quieter then the others, are all your strings similar volume?
I LOVE the Sustainiac! Once I tweaked the trim pot, it’s working great. All the strings are even volume. I wish I would’ve gotten one sooner. It’s so fun to play.
Mine buzzes like a monster when I turn it on in the third position. I can feel the strings vibrating. Almost feels like I holding a live wire. What do you think would fix that?
Either the pickups are too high (too close to the strings) or the gain is too high would be my guess. I would turn the middle trim pot all the way down first and see if that fixes it. If it does, you might need to raise the trim pot back up a little so it sustains like you want it. Next I would lower the pickups until it stops buzzing. Good luck! Edit: you might also have to do some of both, trim pot and pickup height.
@@thawthaw03 I’m just learning myself but the first things I’d try is changing the battery and raising the pickup height. The neck pickup not working might be a loose wire. Not sure.
Mine causes the guitar to have no output signal when first plugging it in, even though it's off. Sound slowly ramps up to normal, but has lots of noise and fuzz before it levels out. Seems to work fine after waiting for it to settle down.
i have 3 guitars with Sustainer system. A Reverend, a Burny and a Jackson. Each one sounds different, with squeal even without touching the strings... with or without sustain depends on the volume... I didnt know that the sittings, that u show , were possible. I will try to make them sound better...but this needs a lot of time and patience.
If you have three trim pots, try turning the middle one down until the squeal stops.
I think some models have two trim pots. It should be the one towards the middle.
worked for me thank you
Awesome!
Conclusion:
Buy your HellRaiser direct from Schecter or an authorized dealer so that it comes with a lifetime warranty. Their warranty says, "Your new Schecter instrument is warranted to be free from defects in materials and workmanship for the life of the original owner". I'd be requesting that my Hybrid be tested before shipping as well if bought from a authorized dealer like a guitar shop.
Yep. Trying to save a couple hundred bucks cost me hours in trial and error.
@@RiffMusic1970 Still appreciate you sharing your story so that guys like me about to purchase a new Schecter w Sustaniac are aware of how best to handle their purchase. Respect bro.
I bought a Schecter banshee and tried doing what you're doing and couldn't get anything but horrible noise. So i ended up ripping the entire sustainiac system out and replacing it with a custom Odezza pickup. John from Odezza hooked me up with everything needed to put it back together, cloth wrapped wire, pots, selector switch, two coil switches and two schematics if i wanted coil split or coil tap. Those sustainiac pickups SUCK!!! I left the sustainiac system completely assembled except for the pickup wires and battery wires so i could sell it but couldn't. Anyone wanna buy a complete sustainiac system? Oh ya, i had a problem with tht neck pickup and i think the D string being quieter then the others, are all your strings similar volume?
I LOVE the Sustainiac! Once I tweaked the trim pot, it’s working great.
All the strings are even volume.
I wish I would’ve gotten one sooner. It’s so fun to play.
I'm interested if you still have it.
ill buy it
Mine buzzes like a monster when I turn it on in the third position. I can feel the strings vibrating. Almost feels like I holding a live wire. What do you think would fix that?
Either the pickups are too high (too close to the strings) or the gain is too high would be my guess.
I would turn the middle trim pot all the way down first and see if that fixes it. If it does, you might need to raise the trim pot back up a little so it sustains like you want it.
Next I would lower the pickups until it stops buzzing.
Good luck!
Edit: you might also have to do some of both, trim pot and pickup height.
My neck sustainiac not working when it's in off position. And doesn't sustain in all positions. Why?
@@thawthaw03 I’m just learning myself but the first things I’d try is changing the battery and raising the pickup height.
The neck pickup not working might be a loose wire. Not sure.
Mine causes the guitar to have no output signal when first plugging it in, even though it's off. Sound slowly ramps up to normal, but has lots of noise and fuzz before it levels out. Seems to work fine after waiting for it to settle down.
Tried new batteries?
@@RiffMusic1970 Turned out to be my wireless xmit and rx devices. I guess they aren't entirely compatible with the Fishman pickups.
@@rossirwin8909 ah. That’ll do it.
Mine squeals on harmonic mode and mine doesn't have a circuit board 😢
Aw man. I can’t help since this is the only one I ever messed with.
@@RiffMusic1970 I understand