I would still recomend this lock for locking travelbags. The reason is they are so very fast and convenient to use under stress. And the lock is relatively small in size.
one technique is to press all the buttons, unlock the padlock, you will notice that the lock will move but will not totally unlock, and now you try to reset the buttons and you will notice that the harder it is to reset the button then the more likely it is to be part of the passcode.. you will notice that other digits will be easier to reset..
What do you mean by the harder it is to reset? Do you mean by pressing up back the digits? Edit: I already unlock mine. Which is only 8 digits. I just followed your steps. Thanks again mate 👌👍
here is another way.... push the lever even without the code after pressing the lever you should notice some buttons moving a little bit if the button is moving it means it is part of the code and repeat until the code is cracked
Using similar idea learned ftom this video, i managed to open a good quality 10 button Zarker lock that i failed to open for last 16yrs. Now it can be used again. Thks.
I have tried the video method but failed. So i tried another way by first pressing all buttons down. Push the open lever to release the lock hinge abit, and pull the lock hinge tight by hooking to something. Now press number button up one by one. There will be one that get stuck tightly. Release the hinge pulling, press up that button. Now repeat until you suddenly get the lock open itself when 5 right buttons are pressed up.
Hi,oky so I have a trick that most of the time works..on the side of the buttons it has like round impressions,so what you need to do is press in all the ones that are the highest then it should open your lock.
Buen día, mira que mi candado se bloqueó, ya no cierra y los números se pegaron no se dejan presionar, que debo de hacer? mil gracias Good morning, see that my padlock has locked, it no longer closes and the numbers have stuck, they cannot be pressed, what should I do? thank you
The way that worked for me is press it all down and unlock it. Try to reset the digits others will be soft and some are hard. Those hard ones have the possibility to be the code and it works
For better quality Zarker button lock made in Korea, it will be very difficult to trial as the opening lever will only work if the 5 numbers are correctly depressed. First press the opening lever. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever. Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination. There is no need to pull the shackle tight hard as many videos told.
hello, I've got an Yeti with 0 - 9 numbers - 5 digits lock at first it look just like yours, but when I try your method it just doesn't work, all the buttons go down easily... any idea? many thanks in advanced.
No not really. I've never tried a Yeti. But I've tried some other ones. They have all opened with this technique. Try hard tension on the release button. If they lock up then, it's all a matter of balancing the right tension. Not to hard, not to light.. It takes a bit of practice. If your lock is slightly different. It might retail slightly different technique. Finding the right method for a new lock is quite fun. Good lock with your lock. -N-
hi all. i accidently found other way to open this type of lock. In lock position and all the button protruding, when you slide the unlock button at the bottom, you will see combination button move a bit like something is knocking it from inside. give it a close look. if you didn't see it. press the shackle down until it click and reslide the bottom button. it will first 'knock' one side of the button (6,7,8,9,10 button).Once you pressed the 'knocked' button down, press the shackle down and reslide the bottom button. it will move/knock the combination on the left side (1,2,3,4,5).
For better quality Zarker button lock made in Korea, it will be very difficult to trial as the opening lever will only work if the 5 numbers are correctly depressed. First press the opening lever. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever. Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination. There is no need to pull the shackle tight hard as many videos told.
💜💙💚💙♥️💜🇿🇦🎉🎉🎉l found an old the l saw your vedio l tried first l failed then l went to watch other people's vedio l failed then l went back to your vedio then bam.. bam it open😅😅😅🍻thanks have a good day
I have keypad like this to with 5 digit code numbers made in China...still can't open like what u show on this video...maybe 4 digit keypad is dummy padlock .
For better quality 10 number button lock like Zarker made in Korea, it will be very difficult to trial as the opening lever will only move if the 5 numbers are correctly depressed. So first press the opening lever firmly even it doesn't move. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever. Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination. There is no need to pull the shackle hard as many videos told.
here is another way.... push the lever even without the code after pressing the lever you should notice some buttons moving a little bit if the button is moving it means it is part of the code and repeat until the code is cracked
I would still recomend this lock for locking travelbags. The reason is they are so very fast and convenient to use under stress. And the lock is relatively small in size.
PPP
I agree by using theses the combination can be given to someone else over the phone in an emergency.
whoaaaa hold it right there. i figure my forgotten password combination lock because of this video. Thanks so much ❤️❤️❤️
I was watching the video and playing with the buttons without looking and suddenly the pad lock was open😄
I was lucky! Thanks for the video!
one technique is to press all the buttons, unlock the padlock, you will notice that the lock will move but will not totally unlock, and now you try to reset the buttons and you will notice that the harder it is to reset the button then the more likely it is to be part of the passcode.. you will notice that other digits will be easier to reset..
Thank you for sharing info its useful not like the video i used to watching not working but when is see your instructions i open it
What do you mean by the harder it is to reset? Do you mean by pressing up back the digits?
Edit: I already unlock mine. Which is only 8 digits. I just followed your steps. Thanks again mate 👌👍
It workk niceee
Thank you! I unlocked mine
here is another way....
push the lever even without the code after pressing the lever you should notice some buttons moving a little bit if the button is moving it means it is part of the code and repeat until the code is cracked
Wow thanks mate. I was looking for a solution to open this lock for hours coz I lost the combination years ago. U saved the day!
Wow it works!!! Hahahahah
yeah ! its work man thanx Alot
Its work dude
thx, got the code thanks to this
Using similar idea learned ftom this video, i managed to open a good quality 10 button Zarker lock that i failed to open for last 16yrs. Now it can be used again. Thks.
I have tried the video method but failed. So i tried another way by first pressing all buttons down. Push the open lever to release the lock hinge abit, and pull the lock hinge tight by hooking to something.
Now press number button up one by one. There will be one that get stuck tightly. Release the hinge pulling, press up that button. Now repeat until you suddenly get the lock open itself when 5 right buttons are pressed up.
Hi,oky so I have a trick that most of the time works..on the side of the buttons it has like round impressions,so what you need to do is press in all the ones that are the highest then it should open your lock.
Nice info. Any ideas on how to change the code combination?
You can't it's impossible
i searched "6 digits 9* pass" and found this LOL
Buen día, mira que mi candado se bloqueó, ya no cierra y los números se pegaron no se dejan presionar, que debo de hacer? mil gracias
Good morning, see that my padlock has locked, it no longer closes and the numbers have stuck, they cannot be pressed, what should I do? thank you
The way that worked for me is press it all down and unlock it. Try to reset the digits others will be soft and some are hard. Those hard ones have the possibility to be the code and it works
i have a similar padlock with 10 buttons but the lever wont move unless you get the combination right.
Same same my lock!!
Well this technology will definately improve with time 🤷♂️😊
For better quality Zarker button lock made in Korea, it will be very difficult to trial as the opening lever will only work if the 5 numbers are correctly depressed.
First press the opening lever. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever.
Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination.
There is no need to pull the shackle tight hard as many videos told.
I have this but my padlock already opened and don't know what is the number, how to reverse engineering to decode it?
I have the same model. 5 digit code with numbers 0-9. Any idea how to reset it?
Open it😁
hello, I've got an Yeti with 0 - 9 numbers - 5 digits lock
at first it look just like yours, but when I try your method it just doesn't work, all the buttons go down easily...
any idea? many thanks in advanced.
No not really.
I've never tried a Yeti. But I've tried some other ones. They have all opened with this technique.
Try hard tension on the release button. If they lock up then, it's all a matter of balancing the right tension. Not to hard, not to light.. It takes a bit of practice.
If your lock is slightly different. It might retail slightly different technique. Finding the right method for a new lock is quite fun.
Good lock with your lock.
-N-
Try the code from 9 to 0.. if you try from 0 to 9 all the button go down easily but yry from 9 to 0 you will see the difference
Whoa this is really cool
I found my mom’s lock that she gave to me and I forgot the pass
does this mean this locked sucks? 🤔
hi all. i accidently found other way to open this type of lock. In lock position and all the button protruding, when you slide the unlock button at the bottom, you will see combination button move a bit like something is knocking it from inside. give it a close look. if you didn't see it. press the shackle down until it click and reslide the bottom button. it will first 'knock' one side of the button (6,7,8,9,10 button).Once you pressed the 'knocked' button down, press the shackle down and reslide the bottom button. it will move/knock the combination on the left side (1,2,3,4,5).
This method also works with 8-button locks
Thank you for this i also forgot the code of my lock and i try this and it works😊😊
I have a Gorin, for more than a quarter century.
I found a lock like this and i accidentally opened it by pure lock now we are using it to lock our gate
Can you change the code?
For better quality Zarker button lock made in Korea, it will be very difficult to trial as the opening lever will only work if the 5 numbers are correctly depressed.
First press the opening lever. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever.
Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination.
There is no need to pull the shackle tight hard as many videos told.
This worked thank you!!
I found out another way to crack the code while doing my examination lol
Now so many people know how to open it. So I'm not gonna buy 🤣
yes.
Thanks, i can remember again the combination number after watch your video.
how to open key its so hard can you tell me how another secret to open sir?
i cant tell if its all the way down or 1/4 down also every button clicks
How many bottons to unlock
I've tried this. For the 6-0, it worked well, for the rest, it doesn't work with my lock.
Forgot my the number lock of mine! I dont know what to do..
HAHAHA THANK YOU SO MUCH, I wanted to throw away my lock cause I couldn't remember the digits qwq
You saved my life
Both ways didnt work. the lock manufacturer probably fixed their latest models, It only worked on my really old combination lock.
lmao holy shit, I decoded it by pushing the lever then doing a wave over the already pushed down buttons upwards and it opened so quick what the fuck?
Thank you! Finally managed to open a lock someone gifted to me haha
works for mee😁😁😁😁 GREAT JOB!!
Opened mine. Thank you!
💜💙💚💙♥️💜🇿🇦🎉🎉🎉l found an old the l saw your vedio l tried first l failed then l went to watch other people's vedio l failed then l went back to your vedio then bam.. bam it open😅😅😅🍻thanks have a good day
How do I change the combination ?? Please help me out
Muhammad Khalid, on the locks I've seen. You can't change the code. Sorry.
How to change the password of it ...?
i really need this 😭😭😭
How to change use fassword ? Please give information the change fasseord ?
Khalid Khan, on the models I've seen.. You can't change the code.
How to change the combination of this lock?
You can't
yes man its work . thanx for sharing this video keep it up
1024 Possibilities
It works fine
Can we reset code
I have 8 digit lock from last 23yrs purchase from hongkong still working condition superb quality
I have keypad like this to with 5 digit code numbers made in China...still can't open like what u show on this video...maybe 4 digit keypad is dummy padlock .
For better quality 10 number button lock like Zarker made in Korea, it will be very difficult to trial as the opening lever will only move if the 5 numbers are correctly depressed.
So first press the opening lever firmly even it doesn't move. Then press button one by one. If one stuck, that's the button not inside the combination. Push it to normal after release the lever tension. Then press the lever again and continue with other buttons. Repeat until 5 numbers are left that can be depressed easily, that will be the magic number to open when you push the lever.
Alternatively, depressed all buttons and try to push up button one by one. The one stuck is to be push up after release the lever tension. Then press the lever hard again and push other buttons up. Continue until left 5 numbers yet to push up, that will be the combination.
There is no need to pull the shackle hard as many videos told.
How
Great video buddy
Great Video👌🏻Thank you, it's work🙏🏻
Awesome very interesting design thanks for sharing! Cheers :)
Wow. Awesome it worked. Thank you.
You got it 👍
how to change the password of my padlock?
ps:mine is 1-8 digits chinese padlock
Change code on this padlock is not possible.
You need to root your padlock first..
Coz of you I got money
Hiw to change this pasword
You can't on this one..
You solved my life thank you so muchh
Thank you
my digial-40 dont do this :(
Jigsjigz same here as well man!
Neat little lock.
how to change the code of this lock any idea plz inform me quick
You can't. Not originally, anyway.
You can't. Not originally, anyway.
Sana ma open Yung sakin
Excellent 🙏 thank you 😊
Thank You! That worked a treat.
It works thank you
Sukses selalu
Thanks! It works!!!
Is very useful your vídeo men, thanks you save my life
Cũng y số cū có gì khác đâu
Nice😍❤️
Great video and a new pair of hands!!! I'm liking your method it's fresh to me I will be looking for more of your videos.cheers
8882huytonUK
borak ahhhh
Amongus sussy baka bruh what the hell padlock in ohio
Ndak bisa basa enggres
tnx love it hehe tnx
here is another way....
push the lever even without the code after pressing the lever you should notice some buttons moving a little bit if the button is moving it means it is part of the code and repeat until the code is cracked
ah, that works too. It's not often that you need visual input to crack locks.
Thanks...now i know whats on my crush's locker...i regret what ive seen