Sir i have a question. Which app is used for Bluetooth used for tje mobile. And also what have you connct at the end it looks like a adapter with wire probes. As the 5volt amd 2 ampere power adapter is used before. What is that?
For all of those who got error in connecting with the bluetooth in app...the solution is that we have to remove the else part code in the mit app(clock 2 timer block) then the dialogue will not appear on the screen and u can connect it as mentioned in the video.
ماشاءالله Very good explanation of the steps, making this project looking easy. Wonderful. Wish you and جزاڪ الله your projects explorers a very good luck.
Bro in this video you have shown you have downloaded AIA & APK Files in your computer download center but in your link in the description it is not downloading it is showing upload in github centre
i have used app and some of your code but have a timed system twice a day it seems to interfere with your code stops the app until timed finished but does not update app either
I have the same home automation project as you, I have a question, for example when the light is on, and I close the app, what I want to happen when I open the app again is that I still see the status when the light is turned on
I've used charger instead of adapter..my relay board is working properly bt my devices are not working or not getting the power? What am I doing wrong? Plz help..
Hi I am doing this for science expo but with 5 volt appliance like 5v dc motor and led light how can I do that how much volt does the Arduino give without that relay?
always use nodemcu instead of arduino as its small and cheap too. And expand this project further and add manual switch control too. btw can we control this project from multiple devices? for example if i use this project im my room than i want my siblings to have control too via their cell phones.
@@MuhammadAnsar Four relay timer (Four mobile charging ke liy different different timer set karsakege aaisa Projects banai sir) Components-: 1. Ardino uno 2. display 16x2 / Nokia 5110 3. Four relay
Sir its urgent plz reply Sir jab mai Bluetooth devices search kar raha hu toh HC 05 aa hi nhi raha hai...plz help...😢...no available devicea bata raha hai... solution dijiye.. project submit karna hai
Hello sir, I have one project jisme maine gsm module k through dtmf codes k jariye control hota hai ab usme mujhe android app integrate krna hai aur android app aur gsm se usko control krna hai to uske liye help chahiye
@@MuhammadAnsar mera project hai jiisme gsm module arduino uno Aur hc12 use kiya hai.... Jispe call krke mai on ya off kr skta hu..ab mujhe usme android app bhi use krna hai...... Calling se bhi on off hona chahiye and android app se on off hona chahiye uska kuch solution btaiye.....
Assalamu alaikum.. The apk is not working? When I open the app it's show me the error Error503: The specified address is not a valid bluetooth MAC address
In my testing as per your instructions continuously Error 503 specified mac address is not valid is coming, reset unpair, everything done but not resolved, my Bluetooth module working fine with my arduino Uno. Please guide me what to do & my mobile android version 10
Sir maine ise ghar par banaya, ye puri tarah success hota hai isi liye bohot bohot dhanyavad
Thank you
Bro could you connect with me please?
Bhai program ka link send ker do na mere ko
How to connect Bluetooth with Aurdino??
it is indeed an excellent project sir. It worked this side
thank you
Sir i have a question. Which app is used for Bluetooth used for tje mobile. And also what have you connct at the end it looks like a adapter with wire probes. As the 5volt amd 2 ampere power adapter is used before. What is that?
For all of those who got error in connecting with the bluetooth in app...the solution is that we have to remove the else part code in the mit app(clock 2 timer block) then the dialogue will not appear on the screen and u can connect it as mentioned in the video.
When I removed the whole else part from clock 2 timer and downloaded it , I got a 516 error
@@lavanyaganesh4938 please check the logic properly before removing it
@@dom47 ok
can u please show me exactly which part has to be removed.
i am getting error msg while opening the app what to do now ?????????
ماشاءالله
Very good explanation of the steps, making this project looking easy. Wonderful. Wish you and جزاڪ الله your projects explorers a very good luck.
جذاڪ الله خير
Thank you sir this device save my thesis.
You are welcome
Man u are a life saver i will do this inside a car for controlling windows
Thanks Sir It Works We Made This....
🥰😍🥳🥳
Welcome 👍
My project is not Working sir ???? Sir pls rply
Gamer sir please help i have to show this project as final year project i m stuck please help sir
Can you help me sir
Bro hi, pls help with this error: "the specified address is not valid MAC bluetooth address". when get into app this error shows to me
I am Brazilian. Parabéns pelo excelente trabalho. Excelente tutorial!!!
no es la verdad
Please, I would like to know how you linked the application to the device that you created
It is very useful and chief hai
Thanks for liking
My project is working but the problem is, even after turning off the channels still it's on witha dim light, a little Power supply is still there
Bro in this video you have shown you have downloaded AIA & APK Files in your computer download center but in your link in the description it is not downloading it is showing upload in github centre
Asi multiple circuit ko kase connect kare
Error Cannot connect to (The specified address is not a valid bluetooth MAC Address)
i have used app and some of your code but have a timed system twice a day it seems to interfere with your code stops the app until timed finished but does not update app either
Sir if we take 2 relay module it will work?? And if ot will work male and female wire kaise lagaye ge
would we use only one appliance like bulb instead of many?
yes use this
Sir mere pas arduino uno r3 he ye program me usme bhi copy kar sakta hu
Nice vidio,, friend i Cannot using this app, always eror Connection, please help me to fix this problem,, btw I use Module Bluetooth hc06
use the bluetooth module HC-05
Can't upload files what to do????
Can i use 12v AC bulbs in this circuit. Please help
1 doubt sir., do we hve to use smart device like bulbs or normal bulbs is fine for home automation
yes
how do i solve ERROR 908.BLUETOOTH_SCAN has been denied. please enable it in the settings app
congratulations on this project and I believe that there will be more
thank you
In Shaa Allah
@@MuhammadAnsar
Please share the link of program...
Or tell me how I can connect...
I need it I want to make it our school science exhibition
Sir maine sirf 2 relay hi use ke hu toh code mai kya changes karu??
bhai circuit design k liye konsi app use krte ho??
I have the same home automation project as you, I have a question, for example when the light is on, and I close the app, what I want to happen when I open the app again is that I still see the status when the light is turned on
I've used charger instead of adapter..my relay board is working properly bt my devices are not working or not getting the power? What am I doing wrong? Plz help..
Sir the website is not working please fix the issue So that I can get the access of code
Hi I am doing this for science expo but with 5 volt appliance like 5v dc motor and led light how can I do that how much volt does the Arduino give without that relay?
you can use the same circuit for 5v
What if we want to use wifi connection instead of bluetooth??
Can i present this for capstone project.?
Very good sir
thank you
Ac current per bhi kam kary ga means motor ac frzier per laga sakty?
Haaan g
@@MuhammadAnsar ac current per bhi yehi use hony like bulb waly connect my ac motor wire laga dun?
if i replace arduino to esp32 is it can use the same code or its totoly different ?
No, the code will have to be changed
In 19:33 and 20:46 the wires are connected to the adaptor you used but if I use the mobile adaptor where should I connect the two wires
Connected to 220 power source
do i need to change the code if i use a led bulb or any light in stead of fan
There is no need to change code
Does this work properly as 220 v could be dangerous right
yes
when i run it i got in the application ERRO 516: unable to write:broken pipe
why did you connect the project with the laptop via usb cable??
for code uploading
Thank u brother. ...i have a dobut...is this work between long distance ...or only short distance? ??
almost 40 meters
always use nodemcu instead of arduino as its small and cheap too.
And expand this project further and add manual switch control too.
btw can we control this project from multiple devices? for example if i use this project im my room than i want my siblings to have control too via their cell phones.
Yes jobhi Bluetooth connect krle he can control this
Please send your contact number 🙏🙏
@@muhammadnauman958 wah bhai kya english
Sir I have already completed the programming, but the Arduino Bluetooth doesn't appear on my list, what should i do?
same problem what to do?
@MuhammadAnsar what is the use of connecting 5v 2amp power adapter
for power supply
very nice lekin bhaiya 8 chennal me bnaey...bahut hi achha codining
ok
Sir ap konsi ardino use kara
Arduino UNO/ Arduino NaNo
Sir, what can I buy that same as 5v 2Amp power supply in the video
use the any mobile charger
How to add manual switches to this circuit
Very good Projects bro👌👌👌
thank you
@@MuhammadAnsar
Four relay timer
(Four mobile charging ke liy different different timer set karsakege aaisa Projects banai sir)
Components-:
1. Ardino uno
2. display 16x2 / Nokia 5110
3. Four relay
Hello sir yia kitni range ma work kar ta i mean pura room ma ya sirf najdik se hi
Sir its urgent plz reply
Sir jab mai Bluetooth devices search kar raha hu toh HC 05 aa hi nhi raha hai...plz help...😢...no available devicea bata raha hai... solution dijiye.. project submit karna hai
app ki setting ma jaa k bluetooth enable kry
@@MuhammadAnsarapp konsi ha Bluetooth ka lia
Sir Arduino laga ne baad app ne resistor lagya kya wo Black wor white voh kya hai?? Koi bataye ga kya
Hard Jumper Wire hy
Arduino nano ki jagah ardino uno use kar skate hai ? Us ka diagram
haan g arduino uno use kr skty hy
Can you tell what bread board u have used
Basic Bread Board With Slot - 8.3*5.5 cm
Bro pls error 503 the specified address is not a valid Bluetooth MAC address problem pls how to fix nro
Same problem
Mujhe switch chaiye kitane tak aap ye switch bechenge
Hello sir,
I have one project jisme maine gsm module k through dtmf codes k jariye control hota hai ab usme mujhe android app integrate krna hai aur android app aur gsm se usko control krna hai to uske liye help chahiye
haaan g bhai btay kia help kr skta ho
@@MuhammadAnsar mera project hai jiisme gsm module arduino uno Aur hc12 use kiya hai.... Jispe call krke mai on ya off kr skta hu..ab mujhe usme android app bhi use krna hai...... Calling se bhi on off hona chahiye and android app se on off hona chahiye uska kuch solution btaiye.....
Assalamu alaikum..
The apk is not working? When I open the app it's show me the error
Error503: The specified address is not a valid bluetooth MAC address
Can you please upload the code and schematics link again, the page is not opening
Pls use laptop
show a message Error: could not connect .... .what to do?
Press this point immediately after the application opens 18:26
please i can i convert my arduino code to AIA FILE so i can use it in mit app
cost kitna aayeha hardware ko
Sir apne programming karne ke liye software konsa used kiya. Arduino ka.
Arduino IDE
Sorry help me, what should I do? THANK YOU
Sir ise dc motor control kar sakte hai kya
mei ne bhi ye project kiya hai...button proper work ho rahe hai..but voice command ka issue hai
mobile setting me speech recognition google allow
Hello mam can you help me
مثل همیشه عالی
I tried but it doesn't work. Laptop doesn't connect to HC-06; what to do?
It is not for laptop it is controlled by mobile application
can i use 5v 1A adaptor for this???
yes
How to connect the mobile charger to this project
for power supply
Kya isme ceiling fan connect kar sakte hai? Ya fir relay change karna padega?
connect kr skty hy esi relay se
how am i supposed to get the arduino application????? please reply
Check the video description
@@MuhammadAnsar hey... actually I am having trouble in uploading the code into Arduino...it keeps saying "problem uploading to board" ...what do I do?
@@AishwaryaVV-jj9es yes broo same problem
@@AishwaryaVV-jj9esany solution?
Can i use arduino uno for that
yes use this
Sir relay board the other can also be used?
yes
hi i got a question, that yellow component, is it acting as a power source does that mean we can use a external power source ie battery etc.
Can this project be applied on refrigerator?
yes
@@MuhammadAnsar how? Can u guide
Hi sir there is problem in EEPROM showing no file such a directory
use software arduino ide 1.8.19 version
Thank you brother.
welcome
Plz can u give detail illustrations of how to go about the code using android phone on this same project ?
yes i will try
Video la Male to Make Jumper wire kuduthurukeenga.. Description la Male to Female kuduthurukeenga ??
duno hi use ho rhi hy
apk ka download link bhej do sir play store me nhi dikha rha same aisha apk
In my testing as per your instructions continuously Error 503 specified mac address is not valid is coming, reset unpair, everything done but not resolved, my Bluetooth module working fine with my arduino Uno. Please guide me what to do & my mobile android version 10
@@FarjeeGaming bro my already connect bluetooth module but not app is working same error and MAC address problem
@@TamilGamePlay My also not done when I restarted the application!! So I think it's problem of Arduino
You are using machine learning code yes or not??
error cannot.connect to
you have done their circuit simulation
simulation file is not have
Aap ne socket ka button koansa use kiya hai?
Hello. The 2 wires coming out the plug socket connected at live and neutral or neutral and ground?
yes how to connect it
Bro it is showing Cannot connect and it is not working. Can u show us how to make app and connect Bluetooth
Kitani distance se control ho Sakta hai
30 se 40 feet
Sir HC-05 BLUETooth is connecting to phone sir pls rply
hi Sir. I can't use the voice function on the app even though I followed the video. please help me fix it.
check the your mobile setting
application me power ke button se kuchh nahi ho raha hai? please check the code.....and guide me
hello, can i add rf remote system on this project?
yes
Very nice
thank you
Hii , Muje boom barrier ko open or close mobile aap se karna hai . Ye possible hai., To muje detail me batao .
Price Kitna hai ye project ka
Nice...
Thank you! Cheers!
sir konse software pe code run karana he can you please give link for it
Arduino ide
@@MuhammadAnsar can you send a link actually it"s not downloading