you talk about the vanos gears right? They don’t have alignment once camshafts are timed with the special tool, you need to tight the vanos gears up to 80 Nm
@@SuperFastDriver yeah followed that, but my vanos gears rattle like 1/2 minutes at cold start over-night, then it runs perfectly fine like in the video. I think its a oil pressure problem. Do you know if i need any special tools to remove the pump and check it ?
Czesc . Mam silnik n45b16 spala litr oleju na 500 kilometrów. Odma zarypana olejem, kopci. Co może być przyczyną tak dużego spalania. Sama odma czy uszczelniacze , pierscienie ?
Hello friend, from my experience I can tell you that the valve stem seals would be the cause, piston rings less likely.. how many miles you have on the car? Is it smoking all the time? Or when you accelerate you have visible Claud of blue smoke?
@@SuperFastDriver e87 2005 180000km , The car smokes when I stand I traffic and I run ten IT is big cloud for me white smoke , but sometimes when I drive and I acelerite car I also See smoke . I am not sure of the milage of the car .
This BMW engine N45 overhaul video helps me a lot. Thank you very much 👍
My pleasure 😊
Nice engine overhaul video 👍
can you tell me where the pcv valve is located e90 please and thank you, nice video by the way
Qué torque se usa para los tornillos de bancada?
Does the cam gears have any alignment when inserting them onto camshaft ? Except the impulse sending wheel that aligns with the special tool.
you talk about the vanos gears right? They don’t have alignment once camshafts are timed with the special tool, you need to tight the vanos gears up to 80 Nm
@@SuperFastDriver yes, thats what I wanted to know, many thanks !!!!
@@gigimarfa877 I have N45 timing here check it out: ua-cam.com/video/P_DR8Zcr-dY/v-deo.html
@@SuperFastDriver yeah followed that, but my vanos gears rattle like 1/2 minutes at cold start over-night, then it runs perfectly fine like in the video. I think its a oil pressure problem. Do you know if i need any special tools to remove the pump and check it ?
@@SuperFastDriver i have changed the oil pump, its the same you have in this video, does it have any timing points ?
Also what is the timing of the oil pump ? Can't be seen in the video
Hi, the complete timing you can see here ua-cam.com/video/P_DR8Zcr-dY/v-deo.html
@@SuperFastDriveri can't see how the timing for the oilpump is done
Good work, looks like this video will be helpful to me and can i learn torque specs for camshaft bearing nuts?, thanks 👍
And oil pump sprocket nut torque specs also
@@hightower001 thanks, the camshaft torque specs 11Nm
@@hightower001 31 Nm ;)
@@SuperFastDriver thanks for the information )
Czesc . Mam silnik n45b16 spala litr oleju na 500 kilometrów. Odma zarypana olejem, kopci. Co może być przyczyną tak dużego spalania. Sama odma czy uszczelniacze , pierscienie ?
Hello friend, from my experience I can tell you that the valve stem seals would be the cause, piston rings less likely.. how many miles you have on the car? Is it smoking all the time? Or when you accelerate you have visible Claud of blue smoke?
@@SuperFastDriver e87 2005 180000km , The car smokes when I stand I traffic and I run ten IT is big cloud for me white smoke , but sometimes when I drive and I acelerite car I also See smoke . I am not sure of the milage of the car .