K24 Swap EM2 Part 3- Engine Install/Running!! (Check it out!)
Вставка
- Опубліковано 1 сер 2024
- In this video Ajay (my brother) & i install the K24 into the EM2 2001-2005 civic and get it running and i try to be as detailed as possible if i left something out im sorry about that. Also don't forget to subscribe and feel free to comment below with any questions you may have!
Here is a link to my other channel Don't go subscribe!
ua-cam.com/users/jamesdguychannel?s...
DON'T CLICK THAT LINK IF YOU HATE ME^ YOU WILL HATE IT.
ONLY CLICK THIS LINK TO TEXAS HONDA CHANNEL IF YOU LIKE MY WORK DO NOT CLICK IF YOU HATE THE CHANNEL YOU WON'T LIKE WHAT HAPPENS NEXT.
ua-cam.com/users/texashondacha...
Snowbuilt Instagram give him a follow
snowbuilt?igshi...
I left out that when using the K20 engine harness the crank sensor wiring needs deppined and repinned to run correct but there is plenty of write ups on this
Link to Vtec academy
/ vtec.academy
Link to my instagram / texashondachannel
Link to my Brothers Instagram go give him a follow!
/ txhondachannel_behindt...
MUSIC CREDIT KINGSHOCK CHECK HIS WORK OUT!!
/ kingshock1
Link to immobilizer (Not needed if using K pro or ecu tune)
rover.ebay.com/rover/1/711-53...
Link to the power steering/ a/c bypass!
rover.ebay.com/rover/1/711-53...
Link to the c101 k20 to em2 adapter harness
rover.ebay.com/rover/1/711-53...
Link to the ESK4 mount kit needed for a Complete K24 swap
COMES WITH REAR BRACKET AND MOUNTS NEEDED! IF USING THE k20 transmission USE ESK3 kit
rover.ebay.com/rover/1/711-53...
Link to MAAS tuning aka michael my tuner SERIOUS INQUIRY ONLY!
/ asian.mike620
LINK TO BESTLINE RACING ADDITIVES
www.racingadditives.com
USE CODE: DGUY20 to get 20% off your entire purchase!!
Here is a link to my Instagram
/ texashondachannel
If you wanna donate to the build here is a link ANYTHING HELPS!
paypal.me/mooremotorsports
Wanna send fan mail? Here is my info!
James Moore
P.o box 821
copperas cove, texas 76522
DON'T FORGET TO HIT LIKE AND SUBSCRIBE! IT HELPS THE CHANNEL A LOT!!!
#kswap #em2kswap #texashondachannel - Авто та транспорт
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Public service announcement!! If you don’t like what I do to MY car then kick rocks ✌🏻. Just so y’all know all the dislikes & hate helps the channel so if you MUST voice your wrong opinion then by all means keep that algorithm happy. 😊😘👍🏻✌🏻
How you get the temp gauge to work ? Mine ain’t coming in
@@gennamaxauto798revise the wiring and do it again
This is the only way to bring these 01-05 civics back to live
Hell yes brother one of the most fun and amazing builds I've ever been apart of im happy I could help 🤙🏽
20:11 haha
Can't believe that's your 1st k swap you made it look so easy nice job bro
Crazy that it ran with just that header on it. My ep had an exhaust leak at the donut gasket between the test pipe and the rest of the exhaust and it barely idle and would die at stops till I replaced it.
That’s crazy man! It does run really good for sure!
That start was so satisfying!!!
Appreciate how u give every little DETAIL GOD BLESS U MAN!!!💙
Love the progress bro, keep it up 👍
Good work - keep it up👍🏻💪🏻
Nice build broo keep up the 🔥 content....
Subscribed! I love all the projects you guys got going on!
Love the detailed information you provide
thank you for showing the wiring
Literally just bought an 01 em2 and want to kswap it at some point soon
Wonderful project !!!
Thats awesome dude, congrats
Nice job! That engine is looking good!
That’s it I’m k swapping mine good job man awesome intel
I am a month in now waiting for my innovative swap mounts and rear T bracket
How did your swap turn out brother ?
Fuk yeahhh fam nice congrats on getting it in and running skrrrt
Lookin good bro
I have a em2 as well now I want to do a k swap but not enough experience to do soo but love the content
same bro
Awesome stuff homie!!!🔥👌🏾👌🏾
Thanks bro!
Hell yes! The suspense has been killing me! Also let me know if you want those ep3 skunk 2 drop springs. If you handle half the shipping you can have them.
Heck yea man message me on my Texas Instagram
will do. Ill have to get them packed up and get an estimate.
sinformant just let me know man!
Dope!!!!!
Glad to see it went well!
I have a question since I am acquiring parts to K-swap my 04 EM2. Since I have the entire k20a3 swap from my 04 EP3... engine, trans, harness and ecu...need subframe and axles...can I use the EP3 k20a3 swap, or do I need stuff from an Accord/CRV/Element to get this to work...I too am trying to stay on a budget...a very TIGHT BUDGET. LOL
Everything will swap straight over! Engine trans/wiring harness, subframe, shifter linkages all that jazz. Only thing you will really need is the swap mounts $530 roughly for the mounts and the $150 k20 to em2 c101 adapter harness and the immobilizer is like $180. The rest is easy
Almost everything from the ep3 will work. The only thing that won't work is the shift cables. You'll need cables from a rsx/rsx-s. If you want to retain AC and power steering you can use the ac lines from the ep3 and the electric power steering from the ep3 also.
Nhia Xiong Yea ima be using the a/c lines and all for my a/c setup. One thing I won’t do is the electric steering no thanks on that I seen too many mess up and lose their steering and I’m about that life lol 😂 I just looped my lines and said f it lol 😂
Yeah buddy!!!
Is the accord shifter needed when running the shift linkages? Or could you use the tick one or a rsx
Dam, that was quick. Your way ahead if where I'm at. You are planning on installing a supercharger?
Eventually but that’s that big money I don’t have lol 😂 eventually though
@@TexasHondaChannel I have to idea how expensive superchargers are fir Honda. I'll Google that tonight. I'm curious 👍
Is there a part number for that Hasport bracket you were waiting on?
I do a k24a2 swap with Ktune conversion harness I pin wires in but I’m not getting no signal to my fuel pump
You should k24 the Ek sedan 🚘
Yayyyyyy run no cats !
i can't or i would. The exhaust shop won't let me get exhaust work done unless it gets a cat installed. (illegal) i always run catless but since i can't do the exhaust work and i want it done right ima just have the cat installed then hollow it out lol
I'm getting ready to do a swap on my em2... is the ep3 harness the same as a rsx a guy is parting a ep3 out close to me
Great job on the swap, I'm planning to do the same.
What ecu do you recommend, ill plan on kpro but not any time soon $$ for now I will use stock
Yea I’m on stock for now due to money lol
Dope install. What year RSX harness did you use?
Bump
Will any k transmission work?
Where did you purchase the front splitter for the front bumper ?
It came on the car when I bought the car
What about a sedan 2001, auto to 5 speed. How do you go by adding the slave cylinder
The hole dimples are there, just have to drill a big hole. I used a step up bit for my girls car when running fogs
Can you please send me the hole parts list for this build please I want to do this to my em2
I want the same
Do a head swap a k20a2 edm or k20 jdm
What cat are you using?
How did you connect the Starter Solenoid signal cable ??
2004 acura tsx k24. Into a em2
Cuanto me cobrarías por aserle ese travajo ami honda civic 2004 tengo muchas ganas de aser esa conversión estaría encantada saludos de dallas tx
Hey man do you have a cable going from starter to alternator from fuse box?
I went over this part in one of these videos. Might have even been this video actually. Lol Either way yes.
@@TexasHondaChannel I’ll watch it again but just in case is it from alt> fuse box and starter>fuse box
What subframe did you use after all???
He used a rsx subframe
What's the estimated cost of the swap not including the engine?
I will be doing a separate video with all that detail.
Will this setup fit in my 2003 Coupe?
Yes if it’s a Honda Civic 2001-2005 coupe. Mine is a 2002 civic coupe the car in this video
Gonna boost that?
Idk what the future holds but right now my bank account says no lol
Can I use ep3 engine harness and ecu to do a k24 swap? Thank an advance my brother.
Bump
Did the ep3 harness work?
I haven't done my swap yet, I'm from indiana it's been way to cold, but I'm definitely going to get it done this year, thanks for asking.
@uveradandiaz917 np thanks for replying
If I’m running a k24a2 would I need to upgrade the fuel system?
it doesnt hurt to upgrade. even oem rsx fuel pump should be good
👍👍👍🌵🌵🌵
👍🏾
Who the heck was that in the beginning 🤣🤣
Super cool..
I have the same proyect..
Em2 k24 swap...
I have rsx wiring harness...
My question is, what I need to do with the ecu...which one I need to buy?
CRV
Not CR-V, you need an RSX ecu
Really start to like this Honda. It's going to be better then Orange peel . . .
I agree!
So just buy a wrecked or junk manual rsx for the swap.
what transmission did you use
Accords 5 speed
Did the shifter cables bolt up or did u have to use brackets cables
I'm glad you done the k series, now you can be like every other channel. Don't think I'm hating on you bro but that's alot of work for the same amount of power for what you already had. On D series. Good luck on the build!! Hope you drive this one more than the other cars you have built. 👍👍
I drive my cars all the time so not sure what t out mean by that 🤷🏻♂️ they are daily drivers that means I drive them DAILY lol 😂 i don’t always record it like “hey I’m going to get food from the grocery store” or “time to go get gas and what a burger” the d17 was garbage I hate them engines with a passion now the D16 was nice but this k makes 166hp with 161 tq that’s before any mods or head swap or anything which is impressive for a factory engine setup and gets awesome MPG in a heavy car. This engine came out of a car that weighs over 3,000lbs. Now it’s in the em2 which is lighter than 3,000lbs so the weight to power will be fun. You don’t have to lie to kick it if you don’t like it just say that i can see you aren’t happy with my decision but it is my car and money in the end 🤷🏻♂️👍🏻
AJ
Ustedes hacen ese swap si llevara un carro ustedes le harían lo mismo
Yo lo ago
Mexican Jesse? How bout just Jesse
Common butt connectors ain't hard to use how u did it starts fires
Do love your video tho