Awesome tutorial. Can you save items to a folder and then reuse them without having to draw them again? Say save 1x2 different lenghts so then you have easy accessto them?
Great video, i appreciate your efforts creating this woodworking video, upload more videos woodworking videos, no other channels upload shaper 3d videos under woodworking
I make products in wood, using fusion 360 but I’m not happy with the performance as I find it sluggish and often awkward. Just downloaded Shapr for IPad and the way you use it it looks just very swift and intuitive, if I can use it like that it’s a switch for me!
Like your style of teaching! Struggling to do a compound angle table with half lap joints on compound angle legs. Perhaps a video tut? Thanks for the tutorials. Coming from Sketchup finding Shapr 3d not very intuitive. Your vids help big time!!
Yeah Shapr3D is a different modeling program from SketchUp, so they approach modeling differently. What kind of a compound angle table with half lap joints are you talking about? If you have instagram, feel free to send me a DM on there and show me a picture?
Regarding the shpr3d application, does it have a free version with no time limit, and is it possible to draw sketches of furniture for woodworking? Does the free version have all the commands as in the paid version? Do you have any basic tutorial videos on using it?
I appreciate your videos, and have bought an iPad Pro and Sharp3D based on your recommendations. As I'm trying to learn the software (I mainly use/used Autodesk Fusion 360 on the PC), I've followed along your video here, but I've run into an issue. It's obvious that the program has been updated since this video (which is to be expected) and somethings in the video are not done exactly as shown (but close enough to figure out). However, I'm stuck replicating the box joints @16:41. I am able to select and "copy/move" them, but they seem to be "attached" to the edge of the front face of the board, creating a chamfer as I drag them to the other side. I've tried selecting the lines manually (to exclude the outside edge of the piece), but I cannot seem to copy these lines properly. I was able to replicate everything in the video before this, but I'm stuck here. Any ideas what I may be doing wrong? Thanks.
@@BevelishCreations I think I know what is causing the error just don't know how to fix. Here's a link to a video showing the issue I'm having: ua-cam.com/video/wl7HR-SBCMk/v-deo.html
I think I've got it. The move option doesn't appear in the sketch unless you select Move/Rotate from the menu. Then I was able to move the boxes from one side to the other without affecting the model.
You can do that manually, but I never account for saw kerf in my diagrams. I know as long as I leave a large enough uncut material on the ends, I’ll have enough material. and I cut the pieces out as I build instead of cutting everything out at the beginning and then build
Wouldn't the second tip/cut/joint be easier to just offset the edge and extrude it downward? Only been using it a couple days and watching videos before bed 🫠
What am I doing wrong??I’m attempting to use the align tool to bring the two pieces together but it highlights the entire piece instead of just the outside edge like you show
@@BevelishCreations Go to Transform > Align. Select the body or bodies that you want to align. This defines the bodies that will be moving in the modeling space. Note: If you pre-select a body and select Align from the adaptive menu, this step is not necessary. Click Next. Select a face or edge from the bodies you want to align. If the body has snap points, they are shown in purple. Select the target that you want to align with. This selection could be any of the valid selections mentioned in the table above. Alternatively, you can select the body’s snap point and drag it to a target body’s snap point.
Lovely video and would be perfect for me but retired and they don’t support my demographic just educational use. They cost can’t be justified in my case
@@BevelishCreations thanks for the videos though my guy, you've iterally made our startup go a different way and save loads of money with showing us shapr3d properly
Hi Alex, thanks for sharing al this knowlegde. Please, can you explain how to present all the pieces for an woodworkshop? I mean, how to créate a plan with separated pieces and not the final ensamble together. It is a question about Shapr3d y have time asking me, THANKS!
Great to see how Shapr3D tools apply to modeling wood joints! You're an inspiration and a terrific teacher, thank you!
Thank you so much!
Fantastic video. Well spoken, easy to follow and you have friendly personality in your teaching. Shapr3d should hire you to teach
This tutorial couldn’t have come soon enough. Keep them coming man! I’ve been blown away with this tool lately.
Thanks for watching!
Got a new Shapr3D tutorial up! Hope it’ll help you out on your journey!
A most excellent teacher!
You are a master at this! I am 70yrs so it will take me time, I have been using Sketchup, but this seems great at 3d!
Brilliant! First week playing with 3D modelling for woodwork, your tutorials are entertaining and extremely useful 😊! Keep it up mate, great work!
Thank you!
شرحك جداً رائع..سريع و مفهوم وتصل المعلومة للمشاهد بصورة متكاملة .شكرا جداً
Thank you so much!
You're a great teacher. thanks
Thanks
Thanks! I’m getting pretty proficient with Shapr3D but I actually learned a few things from your demo. Looking forward to your next one.
Awesome!
Thanks for all the tips, Alex! Thanks! 😃
Stay safe there with your family! 🖖😊
Such great and easy to follow instructions here. Love it!
Thanks!
Great video, can you do one on organizing assemblies… please
Great film, well shot and edited. Easy to follow instrutions. Shapr3D is an awesome tool. Mahalo for sharing! : )
Thank you sir!
Awesome tutorial. Can you save items to a folder and then reuse them without having to draw them again? Say save 1x2 different lenghts so then you have easy accessto them?
Very helpful! Just got back into shaper on an iPad. Thanks!
Glad it was helpful!
Great Tutorial - exactly what i was looking for. Cheers mate
Thanks!
Love this app so far. Good videos, love them.
Thank you!
Great video, i appreciate your efforts creating this woodworking video, upload more videos woodworking videos, no other channels upload shaper 3d videos under woodworking
Thanks! I’m pretty sure I’m the first, but hope to see more!
This is fantastic!!! Thank you!!
Thanks for watching :D
Fantastic tutorial - really looking forward to more Shapr3d content!
More will be coming! Anything specific you’d like to see?
I make products in wood, using fusion 360 but I’m not happy with the performance as I find it sluggish and often awkward. Just downloaded Shapr for IPad and the way you use it it looks just very swift and intuitive, if I can use it like that it’s a switch for me!
Subbed!! I want to use Shapr3D and your channel is best explanation for woodworking!!!
Thank you!
Outstanding tutorial, would love to see more real world examples
Thanks! I’ll definitely make more in the future!
Great video. Do you have a ruler wrap on your Apple Pencil? Where can I get one???
Hey the guys over at Rulerwrap sent it to me. www.rulerwrap.com
Thanks!
Like your style of teaching! Struggling to do a compound angle table with half lap joints on compound angle legs. Perhaps a video tut? Thanks for the tutorials. Coming from Sketchup finding Shapr 3d not very intuitive. Your vids help big time!!
Yeah Shapr3D is a different modeling program from SketchUp, so they approach modeling differently. What kind of a compound angle table with half lap joints are you talking about? If you have instagram, feel free to send me a DM on there and show me a picture?
@@BevelishCreations thanks....Will do.
Regarding the shpr3d application, does it have a free version with no time limit, and is it possible to draw sketches of furniture for woodworking? Does the free version have all the commands as in the paid version?
Do you have any basic tutorial videos on using it?
Love the shapr3D videos! Side question- is there an easy way to make cut list or nesting parts together on say a 4x8’ sheet with this program?
There isn’t an automatic way to do that right now. I usually do it manually, which I actually prefer
18:42 how do I adjust the angle on a Mac? any help would be appreciated. Thanks
You should be able to select the two lines with your mouse, and then change the angle in the text box
Great video
Thanks!
I appreciate your videos, and have bought an iPad Pro and Sharp3D based on your recommendations. As I'm trying to learn the software (I mainly use/used Autodesk Fusion 360 on the PC), I've followed along your video here, but I've run into an issue. It's obvious that the program has been updated since this video (which is to be expected) and somethings in the video are not done exactly as shown (but close enough to figure out). However, I'm stuck replicating the box joints @16:41. I am able to select and "copy/move" them, but they seem to be "attached" to the edge of the front face of the board, creating a chamfer as I drag them to the other side. I've tried selecting the lines manually (to exclude the outside edge of the piece), but I cannot seem to copy these lines properly. I was able to replicate everything in the video before this, but I'm stuck here. Any ideas what I may be doing wrong? Thanks.
Hey sorry, it’s hard to understand what problem you’re encountering. Send me a screen capture to my email
@@BevelishCreations I think I know what is causing the error just don't know how to fix. Here's a link to a video showing the issue I'm having: ua-cam.com/video/wl7HR-SBCMk/v-deo.html
I think I've got it. The move option doesn't appear in the sketch unless you select Move/Rotate from the menu. Then I was able to move the boxes from one side to the other without affecting the model.
Yep I think you/ got it! Sorry I wasn’t much help haha
Great video! How do you account for saw kerf in these joints in the models? Thanks
You can do that manually, but I never account for saw kerf in my diagrams. I know as long as I leave a large enough uncut material on the ends, I’ll have enough material. and I cut the pieces out as I build instead of cutting everything out at the beginning and then build
Interesting and fast!
Hope it was somewhat helpful 😆
would you pick up the 14" Ipad pro max if they make one?
Probably not. I like the larger screen real estate for when I’m editing videos on the go. For everything else, I use my iPad Pro
Outstanding software and video :-) Which ipad do i need to use Shapr3D well?
It should work fine on the iPad Air.
@@BevelishCreations Also the Shapr3D AR feature should work fine on the iPad Air ?
Great!!!
Wouldn't the second tip/cut/joint be easier to just offset the edge and extrude it downward? Only been using it a couple days and watching videos before bed 🫠
please please please make more videos becouse u are amazing so uplode more videos so we can be like you
😂 I can’t tell if you’re joking, but thanks!
@@BevelishCreations no no im not i swear not joking and just now im on my ipad learning from ypur videos so please do more videos thank u
Thank you!
I will share your video at my pages on instagram and I hope soon you uploaded new videos
Thanks you
Thank you for watching!
This is a great tutorial for Shapr3D. Well done!
Thank you!
Question: How do you model a routed profile on say, a tabletop? Haven’t been able to figure it out!??
I’m not sure what you mean. Like a roundover around the edge?
@@BevelishCreations no more of a profile like on a pictureframe or crownmoulding. Kinda
@@BevelishCreations in sketchup i can create a profile and then use the follow me tool to apply the profile on all 4 sides of a table.
You’ll want to draw the profile in a sketch. I’d it’s a circular table top, use the revolve tool. If it’s a rectangular table, you can extrude it
@@BevelishCreations are you referring to a sketchplane? Yes the table is rectangular.
Algún curso de shapr3d en español
What am I doing wrong??I’m attempting to use the align tool to bring the two pieces together but it highlights the entire piece instead of just the outside edge like you show
You selected just the edge?
@@BevelishCreations Go to Transform > Align.
Select the body or bodies that you want to align. This defines the bodies that will be moving in the modeling space.
Note: If you pre-select a body and select Align from the adaptive menu, this step is not necessary.
Click Next.
Select a face or edge from the bodies you want to align. If the body has snap points, they are shown in purple.
Select the target that you want to align with. This selection could be any of the valid selections mentioned in the table above. Alternatively, you can select the body’s snap point and drag it to a target body’s snap point.
😍👍🔥
dang that lighting game tho.....
Lovely video and would be perfect for me but retired and they don’t support my demographic just educational use. They cost can’t be justified in my case
16:02 ouch
🤪
I just noticed your name haha
👍 wow I wish somebody give me like a gift iPad Pro
Dude just to make you aware anyone buying through apple store on ipad cannot use your discount. That has to be done through the website
Yes I am aware
@@BevelishCreations thanks for the videos though my guy, you've iterally made our startup go a different way and save loads of money with showing us shapr3d properly
Thanks!
What is your startup? If you don’t mind me asking
too fast and hard to understand
I’ll try to slow down in the future. Thanks! You can also watch this at a slower pace if you need
I know It's great app but please stop use bot comments to showoff
What bot comments
@@BevelishCreations all comments looks same for all your videos , you are very good you don't need those comments
You are assuming I’m using bots? Those aren’t from me…
Love your videos, but can you slow down a bit for this old boy ?? lol you talk fast.
I tried to slow down more in my more recent videos
@@BevelishCreationstell people to slow down your video instead. If they set to 50% it’ll count as double the view time and the algo prefers it.
Hi Alex, thanks for sharing al this knowlegde. Please, can you explain how to present all the pieces for an woodworkshop?
I mean, how to créate a plan with separated pieces and not the final ensamble together. It is a question about Shapr3d y have time asking me, THANKS!
𝑳𝒐𝒗𝒆 𝒚𝒐𝒖𝒓 𝒗𝒊𝒅𝒆𝒐𝒔, 𝒂 𝒒𝒖𝒆𝒓𝒚. 𝑰 𝒘𝒂𝒏𝒕 𝒕𝒐 𝒊𝒎𝒑𝒐𝒓𝒕 𝒂 𝒑𝒉𝒐𝒕𝒐, 𝒕𝒉𝒆𝒏 𝒕𝒓𝒂𝒄𝒆 𝒐𝒓 𝒄𝒐𝒑𝒚 𝒕𝒉𝒆 𝒆𝒍𝒆𝒎𝒆𝒏𝒕 𝒘𝒊𝒕𝒉𝒊𝒏 𝒕𝒉𝒆 𝒑𝒉𝒐𝒕𝒐, 𝒃𝒖𝒕 𝒕𝒉𝒆 𝒆𝒍𝒆𝒎𝒆𝒏𝒕 𝒊𝒔 𝒂𝒏𝒈𝒍𝒆𝒅, 𝒄𝒂𝒏 𝒊𝒕 𝒃𝒆 𝒅𝒐𝒏𝒆
Hey thanks. I’m not sure what you mean. But in the reindeer serving tray video I showed how to trace images
@@BevelishCreations Wow, a response to a comment, thanks for that. I have subscribed 🤗🤗🤗
Thanks!