What also really helps with Temps in DWC or RDWC is placing the buckets directly on a tile or concrete floor. Can't beat the heat transfer. 68 to 70 consistently. Love the videos!
Old Mini Bar fridges can be modified into chillers!. 2 holes 1 water pump and a roll of tubing.. A large old fridge could be setup to chill a bunch of systems. Find older 1's for cheap even free online ready for some mod's. Works great, you get a chiller and grow room snack bar in 1 ;). Heaps of DIY info online about them.
i put my bucket in a storage container half full with water and I threw small bottles of water in the bigger container. it started out to keep the ice away from the roots, but it also gives a larger thermal mass without needing a larger reservoir of nutrients.
Between that and beneficial microbes, I've had no problems. Right at lights on I would add some, and when I got home from work I'd add some more. Idc if it wasn't perfect, it doesn't have to be 😉
I've got an RDWC system, and agree temps of the nutrients has always been an issue for my system. One thing that works for me cause I'm very small... I went out and bought a refrigerated cooler plumbed in as my reservoir, which I plug in and it helps to maintain the temp of the nutrients. Doesn't make a huge difference, but I figure it's a problem that can have many solutions, which when taken in combination, can overcome the problem. I've had very good results with this approach.
"TRUST ME!" Reverse your exhaust system... Place your exhaust fan near your AC vent. Run your ducting through the bottom of your tent. Place your pump directly in front of the ducting, then you're going to place as much of the tubing into the duct, including the air manifold if possible. The core problem isn't room temperature per say, the main problem is that the majority of the hot air that's heating up the water is coming from the air pump. Focus 100% on cooling your "AIR MANIFOLD" & the tubing at the beginning of the air manifold. I literally kept my water temperature at optimal with this method. The only drawback is based around the location of your grow being that that area would have to be running the AC 24/7!
Good video man . The cooling of the water is whats keeping me from get my DWC going I’ll probably wait till winter because I’m a tight ass don’t wanna spend the money lol but I see a grower using a fish tank cooler can’t remember the channel but it work good I think 16 gal a hour was what it do for around 130 not bad and one grow you’d pay for it . Happy growing and happy Birthdays man !!
Running 1-5 gallon bucket and trying to grow in a closet in the Texas summer. Water temps were waaay too high. Got a water chiller from Walmart for $110.00. It's basically a small aquarium chiller. Works great. Unfortunately, I still can't get my seedlings in rockwool to take off even after 2 weeks. My flower is struggling and it's my 1st grow, so we'll see what happens.
@@StNick-ri9pz also once you get your seedling "with the one inch tap root" transferred into the rockwool cube, put the rockwool in some type of humidity dome. Then let the tape root grow a quarter out the bottom of the rockwool before placing it into the bucket. This allows your root to continue growing this time towards the water at the bottom of your Hydrobucket.
You can usually get the cheap auto shades with foam on one side and mylar on the other at the dollar store for a couple of bucks. You can wrap a bucket in that pretty cheaply.
After I uploaded the video, I was like F*CK I forgot the mini fridge technique form my boy. Send me pics, I’ll make a separate video about just that haha
I figured out why my comments weren't being posted!! Buy a used water cooler off market place ( $15- $35 ), one that you would normally put a 5 gal jug in the top. Now tear it apart so that you are left with the compressor and the cooling coil. Some of the cooling coils are coated in a protective plastic and some are not. If the one you have doesn't have a protective coating on it just wrap a plastic bag around the coil so you don't get any oxidation in your nutrients. Place the coil directly into your nutrient reservoir. Buy a device that will monitor your water temp. I use the ITC-308 ($50). Plug the compressor into the cooling plug on the device and set your water temps. I set my water temp at 67 deg and set the turn on temp at +2 deg (69).
@@jessehernandez7568 Yes it works. M y whole RDWC system, 4 buckets in the tent and 1 reservoir outside the tent, does not exceed 20 gals. I also add Hydroguard, ($85 /L), every time I drain and refill.
The reason you must have your nutes at 65 to 70 degrees is because if your nutes go higher than 70 is to prevent root rot, and no matter how good your pump is, if your nutes go higher than 70 degrees you will get root rot. I use 5 gallon igloo water coolers for the plants, and a big 27 gallon igloo ice chest for the reservoir , and use a small old fridge as a chiller and if needed ,frozen water bottles in the reservoir to control temps to grow outdoors during summer. Also, I use big air stones in each planter, and 2 in the reservoir
This has not been my experience. I've done over 50 runs now and my res temps get into the mid 70s all the time. 10 watts of power per plant is more than enough to prevent root rot. Most people run little aquarium pumps which are only about 3 or 4 watts. Amazon has 40 watt pumps for under $40.
I use 1" + thick 8" x 35" x 17" Styrofoam Fish Shipping containers. I rarely notice significant High temperatures even on the hottest days. My growing method is the passive Kratky system. This is the most Affordable hydroponics at 100% FREE to as high as $6 each for the Styrofoam boxes.
Run a small pump on a timer in the Resivour. Run thick black tubing to Window AC Connect to coiled copper tubing , 24". Hang coil in front of AC vent. With black tubing going back. Set room temp to 75*f
Black buckets... Black as we know attract heat, I started using home depot orange and lowes blue even white buckets never had an issue with light leaks. Another tip like you said making ur reservior larger. If you bought pre made dwc buckets that have the grommet elbow and usually blue tinted tube as a water level gauge. Connecting one bucket to another will double your rez size now u won't have the ease of turning one sideways to drain simply place ur plant I'm and empty clean bucket while u drain and clean for your rez change or simply disconnect If you have the ability to just let them drain where they are. You can also place a small pump in the extra bucket and pump it out then refill in the same bucket so u dont even need to mess with the bucket ur plant is in. Yes you will have about an inch or so left on the bottom don't worry it won't harm anything if u are worried use a shopvac for that last 1/2-1 gallon.
Have to change my water bottles twice a light cycle to remain between 68-71. It’s a pain in the ass tbh. I haven’t had any issues with it. Just have to be ontop of it 🤙
Easy fix for you. Put a water hose, into your reservoir at bottom, feed the hose outside the tent or outside. As water heats, the hose will cool it down, too cold, pull the hose in, too warm, release the kraken
Ok I'm running DWC 5 gallon res (STYROFOAM) under a 315 w LEC built in ballast. 1. Add ice to nutrient solution after mixing but before final pH balance.or brake it down to 5 milk jugs and put them in the fridge for a bit . These 2 things will ensure you start off with optimum temp solution. 2. This is most important when controlling and maintaining the air temperature coning I threw your pump ..you gotta have your pumps in front of a fan and best if that fan is ducted to an AC 3.this is RARE tip that maintain temp in your res for long periods of time like this for me eliminates my need for a chiller I will only have to chill my solution at the start of each res change ...... STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM ICE CHEST lined with a industrial strength black garbage bag It is the absolute best insulator and the black garbage bag allows 0.00% of light penetration to the roots ... 4 . enjoy your smoke and a little bit less stress growing .... But I can't stress enough about the container bein STYROFOAM
forget styrofoam, use an actual beer cooler for a nutrient reserve, or 2 inch insulation on top and inbetween the nutrient tanks. Ice helps, no nutrients, just a block of ice once a day......, I also use foam spray insulation around the tubes for the roots!
Nice video, for me, fan-ice daily-across the pump that pumps air into the plant sites. Only way I have been able to get around buying a water chiller, is by chilling the air at the pump intake site, and it is only marginally better than just saying fk it. Running hydro and not pushing for perfection is not the thing in my opinion though.
Hello I have a question when using tap water do I let the tap water sit 24 hours then add my nutrients and cal meg and hydroguard then adjust my ph water
I’ve tried all the hacks, the only thing that’s worked for me was getting a chiller, at 1/10hp its 70w but rn I’m just in a 2x4 tent with a 3 plant setup so the small one was cool.
I put a portable ac directly in the tent and set it at 62. My temp never goes above 72 and that's only when the lights are full blast. Average temp is 67.
What do we do if we are in a mid grow and its time to move house's, or we are in a mid grow and we get a 12-24 hour black out due to storms or something? i guess for storms your could use a generator but do you have any idea's for moving house's?
@@DusaFarms bro I knew something wasn't right so I pulled up your channel and hell of videos were up there. U know I always like comment and watch with in minutes of u uploading. UTube always hating on a brother lol
I just bought a 4 bucket dwc with drip rings by Vivosun. I haven't set it up yet. I'm wondering how or if it is possible to convert it to a rdwc. Any thoughts? Great videos and info!
You need a bunch of pipes and pumps and another bucket for a reservoir and a water chiller, it's a bit of work, and there are videos on how to do it, but not impossible.
I got that system for my son. I think you could get a central bucket, and connect it to the four grow buckets with 3/4" to 1" drains, using barbed plastic connectors, rubber hose, and grommets for going through the buckets. Drill your holes 1/2" from the bottom of each bucket, and connect them to the central bucket. Since they use the air lift to the drip rings, they will draw from the central reservoir bucket. You can do all your pH checks and TDS, and nutrient changes from the central reservoir and won't have to disturb the plants. Draw a picture of how you want to connect everything first, and you will know what supplies to get. You could also just connect the four buckets together by a drain, and use one of them for your reservoir, growing 3 plants. When I do my grows, 3 usually fills my 4x4, and is what my state says is legal, anyway. So far I've harvested enough from each grow to keep me in smoke and cannabutter until my next crop is done, and I'm a pretty heavy user.😂
HELP...! How can it be that the display of my chiller (new) shows 15°C but the reservoir in the 2x4 tent is 28°C ...! Without a chiller its 24° max, so i'm confused ... Inside the tent runs a 300w led with max temp of 29°C at the canopy... How is that possible...?!?😢
If running separate DWC buckets, the best way to keep the temps in the green zone is invest in insulated buckets, or use bucket jackets, and install micro chiller probes, such as Nova Tech Coolworks Ice Probe and temp controllers. Typically sold by aquarium suppliers. I use one in my aeroponic cloner, works amazing! For RDWC it's no question, a minimum 1/13 HP aquarium chiller, 1/10 is the best way to go. Invest in quality chiller brands, stay away from the cheap chinese chillers, especially the electric ones. 🧊
@@Ballme60 No there isn't. You would have to keep ice packs on a constant rotation to BARELY keep those numbers, even indoors during the winter season. And if you can't afford to invest in a chiller, then you're just growing some bullsh*t 🤣
For those interested in supporting the channel further patreon.com/dusafarms
What also really helps with Temps in DWC or RDWC is placing the buckets directly on a tile or concrete floor. Can't beat the heat transfer. 68 to 70 consistently. Love the videos!
Appreciate that fam!
Thank you brother for that 🙏🏻 💯👊🏻💚tile or a 2" slab 40cm x 40cm,,,PEACE bro✌🏼☯️
Had a homie in Ohio do a dwc in his basement perfectly place too
That actually is a good ideal
Old Mini Bar fridges can be modified into chillers!. 2 holes 1 water pump and a roll of tubing.. A large old fridge could be setup to chill a bunch of systems. Find older 1's for cheap even free online ready for some mod's. Works great, you get a chiller and grow room snack bar in 1 ;). Heaps of DIY info online about them.
Small chest freezer with bad top seal.
Never worked as a freezer. Perfect with a thermal switch and the resievor.
i put my bucket in a storage container half full with water and I threw small bottles of water in the bigger container. it started out to keep the ice away from the roots, but it also gives a larger thermal mass without needing a larger reservoir of nutrients.
Smart! Appreciate it fam
Between that and beneficial microbes, I've had no problems. Right at lights on I would add some, and when I got home from work I'd add some more. Idc if it wasn't perfect, it doesn't have to be 😉
I've got an RDWC system, and agree temps of the nutrients has always been an issue for my system. One thing that works for me cause I'm very small... I went out and bought a refrigerated cooler plumbed in as my reservoir, which I plug in and it helps to maintain the temp of the nutrients. Doesn't make a huge difference, but I figure it's a problem that can have many solutions, which when taken in combination, can overcome the problem. I've had very good results with this approach.
"TRUST ME!"
Reverse your exhaust system... Place your exhaust fan near your AC vent.
Run your ducting through the bottom of your tent. Place your pump directly in front of the ducting, then you're going to place as much of the tubing into the duct, including the air manifold if possible.
The core problem isn't room temperature per say, the main problem is that the majority of the hot air that's heating up the water is coming from the air pump. Focus 100% on cooling your "AIR MANIFOLD" & the tubing at the beginning of the air manifold. I literally kept my water temperature at optimal with this method.
The only drawback is based around the location of your grow being that that area would have to be running the AC 24/7!
Appreciate that fam!
Good video man . The cooling of the water is whats keeping me from get my DWC going I’ll probably wait till winter because I’m a tight ass don’t wanna spend the money lol but I see a grower using a fish tank cooler can’t remember the channel but it work good I think 16 gal a hour was what it do for around 130 not bad and one grow you’d pay for it . Happy growing and happy Birthdays man !!
Appreciate it fam and yea I’m thinking about running DWC in winter only to cut back on energy consumption
You can also put your air pump near the cool air intake or outside the tent to suck in and pump cool air into your rez
Solid video. Just validated a few things that I’m planning on changing up for my next run.
I love my water chillers . Truth is I only use them in flower in summer. Grab huge pond pump and pond style air stones / diffusers.
Running 1-5 gallon bucket and trying to grow in a closet in the Texas summer. Water temps were waaay too high. Got a water chiller from Walmart for $110.00. It's basically a small aquarium chiller. Works great. Unfortunately, I still can't get my seedlings in rockwool to take off even after 2 weeks. My flower is struggling and it's my 1st grow, so we'll see what happens.
I always struggle with rockwool as well. I usually just germinate my seeds in paper towels and then place the taproot into the clay pebbles
Use the Paper towel method like dusa said and wait until your tap root is at least 1 inch long before putting it In your rockwool cube
@@freesmokegrows This method is what works best for me
@@StNick-ri9pz also once you get your seedling "with the one inch tap root" transferred into the rockwool cube, put the rockwool in some type of humidity dome. Then let the tape root grow a quarter out the bottom of the rockwool before placing it into the bucket. This allows your root to continue growing this time towards the water at the bottom of your Hydrobucket.
Try to bring the PH down in the rockwool, it tends to have a higher acid level
put salt in the water bottle and freeze it down to -4 degrees !
Just got an aquarium water chiller for my DWC. It was the cheapest one I could find and it was still pricey. Almost $300. But definitely worth it lol
wrap a towel around your dwc, make it wet and let a fan blow air on it.
Hvac insulation on the bucket and pipes works great for low temp problems in the winter time
You can usually get the cheap auto shades with foam on one side and mylar on the other at the dollar store for a couple of bucks. You can wrap a bucket in that pretty cheaply.
YALL SLEEPING ON THE PUMP IN THE MINI FRIDGE LOL.... My go to!!!!!
After I uploaded the video, I was like F*CK I forgot the mini fridge technique form my boy. Send me pics, I’ll make a separate video about just that haha
I figured out why my comments weren't being posted!! Buy a used water cooler off market place ( $15- $35 ), one that you would normally put a 5 gal jug in the top. Now tear it apart so that you are left with the compressor and the cooling coil. Some of the cooling coils are coated in a protective plastic and some are not. If the one you have doesn't have a protective coating on it just wrap a plastic bag around the coil so you don't get any oxidation in your nutrients. Place the coil directly into your nutrient reservoir. Buy a device that will monitor your water temp. I use the ITC-308 ($50). Plug the compressor into the cooling plug on the device and set your water temps. I set my water temp at 67 deg and set the turn on temp at +2 deg (69).
Did this really work for you and is it still?
@@jessehernandez7568 Yes it works. M
y whole RDWC system, 4 buckets in the tent and 1 reservoir outside the tent, does not exceed 20 gals. I also add Hydroguard, ($85 /L), every time I drain and refill.
The reason you must have your nutes at 65 to 70 degrees is because if your nutes go higher than 70 is to prevent root rot, and no matter how good your pump is, if your nutes go higher than 70 degrees you will get root rot. I use 5 gallon igloo water coolers for the plants, and a big 27 gallon igloo ice chest for the reservoir , and use a small old fridge as a chiller and if needed ,frozen water bottles in the reservoir to control temps to grow outdoors during summer. Also, I use big air stones in each planter, and 2 in the reservoir
This has not been my experience. I've done over 50 runs now and my res temps get into the mid 70s all the time. 10 watts of power per plant is more than enough to prevent root rot. Most people run little aquarium pumps which are only about 3 or 4 watts. Amazon has 40 watt pumps for under $40.
I use 1" + thick 8" x 35" x 17" Styrofoam Fish Shipping containers. I rarely notice significant High temperatures even on the hottest days. My growing method is the passive Kratky system. This is the most Affordable hydroponics at 100% FREE to as high as $6 each for the Styrofoam boxes.
Run a small pump on a timer in the Resivour. Run thick black tubing to Window AC Connect to coiled copper tubing , 24". Hang coil in front of AC vent. With black tubing going back.
Set room temp to 75*f
Don't use copper tubing, it will cause oxidation.
Happy birthday 🎈🎉
Ayyye appreciate it fam!
I’m about to run aeroponics so this is just in time
That’s about to be a sick grow!
in nature the plants dont have any trouble with 80-90 fahrenheit. i just use kratky which use air roots that are happy with more heat
Haven't been getting notifications. I got some videos to watch 😂. Good video
One day UA-cam will push my notifications out lol appreciate you for tuning in though
@@DusaFarms you already know fam 👊🏼
Thanks great information
Thanks for watching!
Black buckets... Black as we know attract heat, I started using home depot orange and lowes blue even white buckets never had an issue with light leaks. Another tip like you said making ur reservior larger. If you bought pre made dwc buckets that have the grommet elbow and usually blue tinted tube as a water level gauge. Connecting one bucket to another will double your rez size now u won't have the ease of turning one sideways to drain simply place ur plant I'm and empty clean bucket while u drain and clean for your rez change or simply disconnect If you have the ability to just let them drain where they are. You can also place a small pump in the extra bucket and pump it out then refill in the same bucket so u dont even need to mess with the bucket ur plant is in. Yes you will have about an inch or so left on the bottom don't worry it won't harm anything if u are worried use a shopvac for that last 1/2-1 gallon.
Thanks for the info
Great show my friend! Good information
Have to change my water bottles twice a light cycle to remain between 68-71. It’s a pain in the ass tbh. I haven’t had any issues with it. Just have to be ontop of it 🤙
Are you freezing 1 liter water bottles for that?
@@manuelglz7542 yeah I think they’re a liter. The ones that are normally a dollar a piece ha
@@natureshealing7094 will give it a try.
Easy fix for you. Put a water hose, into your reservoir at bottom, feed the hose outside the tent or outside. As water heats, the hose will cool it down, too cold, pull the hose in, too warm, release the kraken
Ok I'm running DWC 5 gallon res (STYROFOAM) under a 315 w LEC built in ballast.
1. Add ice to nutrient solution after mixing but before final pH balance.or brake it down to 5 milk jugs and put them in the fridge for a bit . These 2 things will ensure you start off with optimum temp solution.
2. This is most important when controlling and maintaining the air temperature coning I threw your pump ..you gotta have your pumps in front of a fan and best if that fan is ducted to an AC
3.this is RARE tip that maintain temp in your res for long periods of time like this for me eliminates my need for a chiller I will only have to chill my solution at the start of each res change ...... STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM STYROFOAM
ICE CHEST lined with a industrial strength black garbage bag
It is the absolute best insulator and the black garbage bag allows 0.00% of light penetration to the roots ...
4 . enjoy your smoke and a little bit less stress growing ....
But I can't stress enough about the container bein STYROFOAM
I think you're definitely right.
forget styrofoam, use an actual beer cooler for a nutrient reserve, or 2 inch insulation on top and inbetween the nutrient tanks. Ice helps, no nutrients, just a block of ice once a day......, I also use foam spray insulation around the tubes for the roots!
I just let my x ol lady in the grow..everything drops 10 degrees instantly...trick is not letting her hang around.....Thanks for your clips.
Nice video, for me, fan-ice daily-across the pump that pumps air into the plant sites. Only way I have been able to get around buying a water chiller, is by chilling the air at the pump intake site, and it is only marginally better than just saying fk it. Running hydro and not pushing for perfection is not the thing in my opinion though.
Happy birthday good sir and thanks so much for sharing your knowledge and experience 🙌🎊🎉
Appreciate you!
I use ice probe chillers on my 5gal buckets...they help
Love all the information on your channel growmie
Appreciate it growmie!
Like your videos I had to subscribe today!
I appreciate that Eddie!
I run my time 7pm to 12PM and then 7pm to 7AM helps control the heat
I been running a heater and an ac unit and for some reason the combination of the two cause humidity to rise if you have that issue
Hello I have a question when using tap water do I let the tap water sit 24 hours then add my nutrients and cal meg and hydroguard then adjust my ph water
I don’t know if you have to but that’s what I do
Dead winter turn off heat in open closet or open space “ autos only though “
What about taking a small aluminum radiator brand new that was never used. Tie it into your circulation line then mount a fan on it to cool the water.
I was thinking about building water chiller with an old cooler coiling a line thru ice water like a reverse water heater
Is temperature a big problem with aeroponic systems?
I’ve tried all the hacks, the only thing that’s worked for me was getting a chiller, at 1/10hp its 70w but rn I’m just in a 2x4 tent with a 3 plant setup so the small one was cool.
I just built a peltier cooler for a total of 15 bucks, great for 1 or 2 buckets but not practical for rdwc.
Chest freezer inkbird and a water pump.
Why did the box fan make your house feel cooler? Evaporative cooling and vapor pressure probs
Bro I been getting screwed, I have notifications on but I just realized it's a bunch of videos I didn't get the notification for
I tried a frozen water bottle and it was melted back to water in under 30 mins. :(
Use a huge pipe coil and bury it deep in cold dirt. Lotta work but it should work.
Invest in a chiller. You'll never look back!!!
I put a portable ac directly in the tent and set it at 62. My temp never goes above 72 and that's only when the lights are full blast. Average temp is 67.
What brand did you get bro I’m looking just in case I need to invest in one
Where the dro grows at bro
Harvesting some plants within the month fam
how about using a radiator inline with some fans?
use a chilller
I run a line off my basement fridge's water dispenser with a T line
Im from florida too brody lol
Hell yea let’s go!
What do we do if we are in a mid grow and its time to move house's, or we are in a mid grow and we get a 12-24 hour black out due to storms or something? i guess for storms your could use a generator but do you have any idea's for moving house's?
Boxes or storage container. I moved houses and used a bunch of boxes and tubs to move my late veg plants haha
What's the fastest cure for a sick plant in dwc
I was wondering why u hadn't been uploading now I realize u have been uploading but I wasn't getting my notifications
Yea UA-cam don’t want to see my shine haha
@@DusaFarms bro I knew something wasn't right so I pulled up your channel and hell of videos were up there. U know I always like comment and watch with in minutes of u uploading. UTube always hating on a brother lol
Exactly haha
Your water temp should be about 10° cooler than the ambient room temperature. 😎
Aquarium coolers on Ali like $150
New shirts available on the site 😁 shopdusa.com/products/df-leaf-orange
Where'd you get a water chiller for 170 that works?
amazon isnt to bad
I just bought a 4 bucket dwc with drip rings by Vivosun. I haven't set it up yet. I'm wondering how or if it is possible to convert it to a rdwc. Any thoughts? Great videos and info!
You need a bunch of pipes and pumps and another bucket for a reservoir and a water chiller, it's a bit of work, and there are videos on how to do it, but not impossible.
I got that system for my son. I think you could get a central bucket, and connect it to the four grow buckets with 3/4" to 1" drains, using barbed plastic connectors, rubber hose, and grommets for going through the buckets. Drill your holes 1/2" from the bottom of each bucket, and connect them to the central bucket. Since they use the air lift to the drip rings, they will draw from the central reservoir bucket. You can do all your pH checks and TDS, and nutrient changes from the central reservoir and won't have to disturb the plants. Draw a picture of how you want to connect everything first, and you will know what supplies to get. You could also just connect the four buckets together by a drain, and use one of them for your reservoir, growing 3 plants. When I do my grows, 3 usually fills my 4x4, and is what my state says is legal, anyway. So far I've harvested enough from each grow to keep me in smoke and cannabutter until my next crop is done, and I'm a pretty heavy user.😂
HELP...! How can it be that the display of my chiller (new) shows 15°C but the reservoir in the 2x4 tent is 28°C ...! Without a chiller its 24° max, so i'm confused ... Inside the tent runs a 300w led with max temp of 29°C at the canopy...
How is that possible...?!?😢
Put the reservoir outside the tent. You are trying to cool it down and yet you have it in the tent where it is hot.
5 PM to 5AM 👍
No one else gonna call out steph curry moonlighting. We know who you are 🧐
so the room temperature can be 68 degrees fahrenheit is that too cold for the plants?
Cold.
no
Water temp should be around 68 the tent temp will be higher.
🎉🎂🥳🎈
Deep water culture...Put your air pump in a mini fridge. Or multiple buckets us a commercial air pump in a mini fridge. You'd be surprised!.
Ice cubes
Please respond back
Complete common sense if you can’t figure out these basics stop trying to grow
200 dollars water chiller Amazon
🌿#1luv4dabudz💚
Instead of using a water chiller pump, can I use a fish heater tank in the resivour?
Hey bro, reddit?
Nice 1 bro some great info as alwayz,,,growerz peace luv an respect brother 💚🌱🌱💚🙏🏻🇬🇧✌🏼☯️an happy growing 🌬💨💭💭
If running separate DWC buckets, the best way to keep the temps in the green zone is invest in insulated buckets, or use bucket jackets, and install micro chiller probes, such as Nova Tech Coolworks Ice Probe and temp controllers. Typically sold by aquarium suppliers. I use one in my aeroponic cloner, works amazing! For RDWC it's no question, a minimum 1/13 HP aquarium chiller, 1/10 is the best way to go. Invest in quality chiller brands, stay away from the cheap chinese chillers, especially the electric ones. 🧊
Chillers are to expensive. There are much cheaper ways to cool the water to a steady 66-68 deg.
@@Ballme60 No there isn't. You would have to keep ice packs on a constant rotation to BARELY keep those numbers, even indoors during the winter season. And if you can't afford to invest in a chiller, then you're just growing some bullsh*t 🤣
@@the_gold_canopy Read my post up top.