Body - store.killerbody.com/products/subaru-impreza-wrc-2007-finished-body Servo www.agf-rc.com/agfrc-high-speed-brushless-digital-servo-b53bhm-p1669227.html
I only watch Nitro/Petrol car videos to support the channel and remind myself why I enjoy electric RC’s so much more now. Less noise and plug and play. Tuning petrol takes up half your playtime.
Each to their own, my electrics just collect dust, they are great fun just too easy, the tuning and tinkering is all worth it listening to a well tuned nitro scream is way more rewarding 👌NITROGANG 🤙
Kev, I know the struggle of self control running an engine in!!!!! I have an easy way……wind the end point waaaayyyyyyy down! Worst part is, when you are running in, those 5 tanks last FOREVER!!!!!!
If second gear wont engage, there is a chance the centrifugal clutch in the gear box is set too tight. There is a grub screw on the clutch that you can access through the small hole on top of the gear box. If you loosen it off the clutch will engage at lower rpm
A little tip for you and others: A procedure for starting at the first pull: dial in a little throttle trim, and be sure to put the car over a little box or piece of foam, so that the wheels can turn freely once the engine starts (or else, the engine will die as soon as the clutch engages). Glow igniter on, pull the cord, and let it rip!
You haven't seen a radio block until you seen the Thunder Tiger ts4n just a foam piece underneath and a clear plastic cover that's held down with a zip tie from FACTORY ! Also make a hole on the windsheild so air can cool the engine ! That's why you sent the previous to nitro heaven ! If properly cooled, nitro engines can run for hours on end (assuming proper fuel and tuning) !
Gosh remote controlled rc cars are so underrated and not popular, i owned a rally yaris out of a rc chassis and had so much fun! Thanks Kev for the video
@@kiwismurf4536 Eh, there's cheaper options, the Killerbody shells are more aimed towards scale builders, who are willing to pay that much. There's a similar Tamiya shell you can get for less than half and there's options from China for even less.
@@kiwismurf4536not all rc costs a fortune, you don't have to spend $1000 on a car,you get some great beginner rc cars that are less than $200 . I got a wltoys 124017v2 for $150 with 2 batteries (2s) and I'm really pleased with it. 40mph straight out the box ( over 50mph on 3s )and you can do it up and upgrade it cheaply and it's capable of insane speeds
When pull start feels binded up it’s flooded… pull plug hold car upside down pull the pull start repeatedly to free fuel from piston… then repeat process 👍👍👍
Awww, man! I've owned 2 WRX's and 1 STi. My STi was a 2006 so the same body style as this car. I really miss that car. I had a set of coilovers on it so I could lower it in the summer and jack it up in the winter. It was a beast in the snow, especially with good snow tires. I used to pick up my friends in the middle of crazy snow storms then head up to VT for some snowboarding. It had a few mods giving it around 75 whp over stock, so it wasn't stupid fast, but it had enough to be fun and still very reliable. God, I miss that car.
I love Subaru as well. Have a 2010 North American built Forrester XT limited. The cool thing about this is it came stock with STI heads. Have a cob air intake down pipe, high flow cat and Nvidia racing pipe 3 in with resonator on it as well. I ended up doing this during covid as parts were insanely expensive for stock and the aftermarket parts were half the price. Sounds great! Runs great!.
I had one too Fun to drive but its not build like my bmw i can you tell you that 😀 Lots of rattle sound and sqeeks. My arm of the back wheel came loose of the chasis 😂 also lots of rust and plastics breaks very easy and the brakes are dangerous bad al my japanese cars from the 90 had problems like that. Me and my friends all crashed because the drive system snapped and we flew into a ditch. He was in the hospital for 2 weeks
If you find that you enjoy nitro on road, find an old Associated Nitro TC3 (NTC3) and you’ll have a blast. 2 speed, brakes etc. from stock. They’re extremely fast and durable. I’ve run one into a curb at 80MPH and the only damage was a bent chassis. That one had an OS 18TZ motor in it and was nuts fast. Tires only lasted one run.
Kev, get an infrared tempgun, they are cheap and you can prevent the engine overheating by checking it with the temp gun occasionally. After a few times youll get a feel for the temp based on smoke/sound too. Its a good tool to help.
As much as I love my electric cars and they’re very convenient, I really enjoy running my nitro cars. They’re so much fun when they’re going well. The sound and the smell is awesome.
Cracker video Kev! Please do a on road nitro build, I’m talking you putting some massive nitro power house engine in and shredding the streets on rubber tyres ! 🙏🏻
hi kev, i have a 3.3 tmax, the reason youre motor cuts out after a while is because of the lack of airflow, you should cut either the front or back window out, trust me it helps a lot ❤
If it produces enough exhaust gases, maybe you should think about adding a turbocharger. If it doesn't spit out a lot of an exhaust gases, put a construction, increase compression ratio and put a turbocharger anyways.
That thing is an absolute unit! ...and probably faster than a real Subaru rally car!🤣That steering servo response time is just bonkers.😮 Maybe that motor will last until you get second gear to work.😉
I get a kick out of how nitro seems to be "new' to you. lol Been doing this for 36 years, and electric's new to me. I feel ALL your pain and frustration man! lol Those two speeds can be finnicky little bitches for sure.
Body - store.killerbody.com/products/subaru-impreza-wrc-2007-finished-body
Servo www.agf-rc.com/agfrc-high-speed-brushless-digital-servo-b53bhm-p1669227.html
Kevin, nice video
I want more xmaxx stuff please 😢
That's so sick man I gotta get one
Price of the car?
Kevin Talbot Bro ❤❤
Its brakes not breaks unless the brakes break while braking
😂😂
Wow so smart🤯
Your very special
@@andrewgoff7213 thankyou, but, its you're not your. Lol sorry buddy
Exactly that😂
"Run it in properly" Suuuure Kev, sure.
Sireeeeeeeeee
Run it in fast and it'll be fast!
I dont think he has ever done it, like hoovie garage 😂
@@HappyDude1 hoovie does used cars.
@@microbuilder hey i am from bangladesh can you please take me some time?
What A BEAUTY
That body looks sweet!
I only watch Nitro/Petrol car videos to support the channel and remind myself why I enjoy electric RC’s so much more now. Less noise and plug and play. Tuning petrol takes up half your playtime.
For every hour you spend driving a nitro car, you have to spend another hour tunning it, fixing it, or figuring out what's wrong with it.
@@Davivd2 exactly. I only have an hour or two when I get time to get out and bash. I can’t be messing around tuning and yanking on a string. lol
Each to their own, my electrics just collect dust, they are great fun just too easy, the tuning and tinkering is all worth it listening to a well tuned nitro scream is way more rewarding 👌NITROGANG 🤙
That's the whole fun of it
nitro goes vroom vroom,electric goes pffffttttttttt not the same
There’s something special about this one
It is so weird to watch your person wen I am in USA But I love the work that you do keep up❤
Anytime Kev runs a gas RC ... it's just a great ad for buying more electric RCs. What a pain in the ass. Thanks for taking the bullets Kev! LOL.
Its nitro not gas
Gas❌
Nitro✔️
That thing is so mean.. I love it. It sounds fantastic too.
That might be my favorite out of ALL the rc cars you've driven.
“Gotta resist that temptation”… immediately floors it 5 seconds later 😂😂
Ikr
?
@@thebraapdawg ?
with the black ones looks super nice
i never watched an RC video in my life... until this one.
"Brakes" 😮 - love ya, Kev!
The way brits say impreza always amuses me XD
Kev, I know the struggle of self control running an engine in!!!!! I have an easy way……wind the end point waaaayyyyyyy down! Worst part is, when you are running in, those 5 tanks last FOREVER!!!!!!
If second gear wont engage, there is a chance the centrifugal clutch in the gear box is set too tight. There is a grub screw on the clutch that you can access through the small hole on top of the gear box. If you loosen it off the clutch will engage at lower rpm
Those black wheels were perfect.
Every nitro or gas rc video you make convinces me I made the right choice avoiding them.
A little tip for you and others: A procedure for starting at the first pull: dial in a little throttle trim, and be sure to put the car over a little box or piece of foam, so that the wheels can turn freely once the engine starts (or else, the engine will die as soon as the clutch engages). Glow igniter on, pull the cord, and let it rip!
Nitro all Day!!!
Fantastic!!!!!!!!!!!!!!!!!
Nice one ❤❤ kelvine
This car is just like the old thunder tiger i had 18years back
That battery box is the reason the first tyre sh!t itself...🤙
i love your blue Defender 😎
It’s Kev, it’s a new video, that means something is going to break
You haven't seen a radio block until you seen the Thunder Tiger ts4n just a foam piece underneath and a clear plastic cover that's held down with a zip tie from FACTORY ! Also make a hole on the windsheild so air can cool the engine ! That's why you sent the previous to nitro heaven ! If properly cooled, nitro engines can run for hours on end (assuming proper fuel and tuning) !
*SOOBROO IMPRETZAAAAAHHHH!!!*
Solberg! How nice of you to have Petter Solbergs name on the car! Petter is the best!!
Great bash 🎉🎉
Gosh remote controlled rc cars are so underrated and not popular, i owned a rally yaris out of a rc chassis and had so much fun! Thanks Kev for the video
@@kiwismurf4536 Eh, there's cheaper options, the Killerbody shells are more aimed towards scale builders, who are willing to pay that much. There's a similar Tamiya shell you can get for less than half and there's options from China for even less.
@@kiwismurf4536not all rc costs a fortune, you don't have to spend $1000 on a car,you get some great beginner rc cars that are less than $200 . I got a wltoys 124017v2 for $150 with 2 batteries (2s) and I'm really pleased with it. 40mph straight out the box ( over 50mph on 3s )and you can do it up and upgrade it cheaply and it's capable of insane speeds
Hey Kevin, you should try cars from T2M brand, its a french brand and the cars are really nice
It’s always a good day when kev posts
No way Kev liked my comment thank you kev!
0:57 @@Imboredlol6969
King of drift!!
Great content mate 👏 i want to get a nitro one day
Another great video, she is a little screamer, can't wait for the 2nd gear video.
Love the body. Petter Solberg's old Impreza🥰
Nice Subaru kevin
YESSSSSSSS!!!!!!!
SUBARU!!!✌🏻
When pull start feels binded up it’s flooded… pull plug hold car upside down pull the pull start repeatedly to free fuel from piston… then repeat process 👍👍👍
Man that little f18 screams!!! Gotta get mine running. I have the hpi wr8 3.0. Id be interested to see you compare the two. 😊
It’s really cool when you start drifting and the exhaust comes out, it sorta looks like the tires are smoking
It totally woke up at the end!
Awww, man! I've owned 2 WRX's and 1 STi. My STi was a 2006 so the same body style as this car. I really miss that car. I had a set of coilovers on it so I could lower it in the summer and jack it up in the winter. It was a beast in the snow, especially with good snow tires. I used to pick up my friends in the middle of crazy snow storms then head up to VT for some snowboarding. It had a few mods giving it around 75 whp over stock, so it wasn't stupid fast, but it had enough to be fun and still very reliable. God, I miss that car.
I love Subaru as well. Have a 2010 North American built Forrester XT limited. The cool thing about this is it came stock with STI heads. Have a cob air intake down pipe, high flow cat and Nvidia racing pipe 3 in with resonator on it as well. I ended up doing this during covid as parts were insanely expensive for stock and the aftermarket parts were half the price. Sounds great! Runs great!.
I had one too
Fun to drive but its not build like my bmw i can you tell you that 😀
Lots of rattle sound and sqeeks. My arm of the back wheel came loose of the chasis 😂 also lots of rust and plastics breaks very easy and the brakes are dangerous bad al my japanese cars from the 90 had problems like that. Me and my friends all crashed because the drive system snapped and we flew into a ditch. He was in the hospital for 2 weeks
Had my bugeye 16 years, I couldn’t get rid of it now if I wanted to (I don’t 😉), the Mrs and kids wouldn’t let me.
@@alxgu198 Keep it for life!!!
@@suavefpv1247 I’m pretty sure I will mate!
That thing rips.
O.s. Engines also makes a one way bearing start stick that goes on a drill, no more blistered diglets, also you probably have a bump box
the tires couldn't even handle the break in period, that is ridiculous...LOL Looks like a fun little car.
U make the driving look sooo easy kev 😢😢😢😂😂😂😂😂
Sidewall printing makes a huge difference to the look, you chose the right wheels and tires.
If you find that you enjoy nitro on road, find an old Associated Nitro TC3 (NTC3) and you’ll have a blast. 2 speed, brakes etc. from stock. They’re extremely fast and durable. I’ve run one into a curb at 80MPH and the only damage was a bent chassis. That one had an OS 18TZ motor in it and was nuts fast. Tires only lasted one run.
1,2 millions views and only 15k likes is crazy. Give these guys more love, what they do is awesome.
The exploding engine adds realism
It did well offroad surprisingly..
Good cameraman getting the low to ground footage
Amazing shots of the subi in action!
Brakes mate disc brakes…champion it’s a nice build
Kev, get an infrared tempgun, they are cheap and you can prevent the engine overheating by checking it with the temp gun occasionally. After a few times youll get a feel for the temp based on smoke/sound too. Its a good tool to help.
The body with those realistic wheels look really cool😮
You naughty boy Kev! You put 'breaks' instead of 'brakes' in the thumbnail. Unless that was intentional being that breaking things is your hobby.
Them drift skills though 🤯 camera man was on point as well.... well done Kev 👍🏾
They should have nitro rc drift races,that be awesome!
I’m ready for a flying rc tank
Yeah I have the same set up on my Subaru impretza gxr 2speed transmission love it
It's good to know from the thumbnail that the disk breaks
As much as I love my electric cars and they’re very convenient, I really enjoy running my nitro cars. They’re so much fun when they’re going well. The sound and the smell is awesome.
Can't wait to see Kevin destroy another RC car!
Yes its great fun seeing Kev destroy Armma’s & Traxxas’s Not fun seeing him destroying Nitro’s
Take it to the skate park.
Happy to see nitro content! That thing is a ripper
Kev get a leatherman wave, keep it in your pocket
The fact that the engine blew up already makes this an even more realistic Subaru! 😂
JK. I love my WRX
This is one you can’t break. Subaru tough baby! 💪
Kev when you prime it you only need a couple of good pulls or you flood or hydro lock the the motor.
He's over priming it a little bit
Cracker video Kev!
Please do a on road nitro build, I’m talking you putting some massive nitro power house engine in and shredding the streets on rubber tyres ! 🙏🏻
Dropped in to redfin for first time couple off weeks ago what a cracking shop and cracking bunch of lads. Will deffo be going back payday lol
That’s the worst run in I’ve ever seen 😂 love your work mate. Still my fav rc channel by a long way
Awesome vid kev hopefully you get Hess working properly
The sound makes it worth it!
That looks like a load of fun 😂😂😂
kev you need a big hole in the front and rear screens ,that engine is overheating due to a lack of airflow
Please KEV buy some Capo RC cars. They have awesome rc you will love them.
hi kev, i have a 3.3 tmax, the reason youre motor cuts out after a while is because of the lack of airflow, you should cut either the front or back window out, trust me it helps a lot ❤
? Or removing the body
Cool nitro!!!!! 💯👍👍
Send it till you bend it! Great video as always Kev and producers!
you should make a boxer 4 engine for it
Hi I like your videos
So cool❤
If it produces enough exhaust gases, maybe you should think about adding a turbocharger. If it doesn't spit out a lot of an exhaust gases, put a construction, increase compression ratio and put a turbocharger anyways.
Definitely want one of them
That thing is an absolute unit! ...and probably faster than a real Subaru rally car!🤣That steering servo response time is just bonkers.😮 Maybe that motor will last until you get second gear to work.😉
Got to love a good nitro rc car kev when thay run properly an when thay don’t thay a nightmare lol 👍👍
One of those Toyan V8 engines on an SCX6 would be pretty epic I bet
Thats great!
Muy buen😂
Not gonna go crazy and run it in properly he says 😂😂😂 , I tell you , it’s that Max , he’s a bad influence on Kev 😂
White rims look way better. Period correct too.
Epic video kev love this ride. PRIMAL RC MAKES A DRAG CAR !
I’d recommend cutting a hole in the windscreen to stop the engine overheating
I was just re watching kevs arrma vendetta video let’s gooo
Been a few, I was worried you’d gotten married !lol
I had those same tires, they were absolutely crap for traction but were deff good for drifting about. More traction then drift tires for sure.
I get a kick out of how nitro seems to be "new' to you. lol Been doing this for 36 years, and electric's new to me. I feel ALL your pain and frustration man! lol Those two speeds can be finnicky little bitches for sure.
That’s your best looking RC, brother!