Asi como este señor que inventa herramientas electricos es digno de resaltar y elogiar esa cabeza y voluntad desde La Paz Bolivia saludos siga adelante
Excelente, era lo que buscaba, pero es mejor que trabajes con mayor seguridad deberia usar un prensa y evitar heridas graves en las manos, estas tienen piel, musculos, nervios, venas, huesos y articulaciones que trabajan en conjunto.
This is a good skill-building exercise for kids but if you really need to cut grass for cheap buy a used push mower for a few bucks and some sandpaper to sharpen it.
Very good work.....!! 2 things..... 1. How you handled battery while trimming grass on ground ? 2. Option to connect to main line AC (using long wire) as the battery life would be very short during working.
It's powerfull but for 12v motor/battery it only last for 10 - 15 minutes (on thick grass) which covers approx 10 sq ft of lawn........ imagine if you've got a wide lawn! I've done the same thing and it's a nightmare to trim my 35 sq ft lawn even with 2 batteries.......
Sicuramente dal punto di vista ingegneristico sei bravo, ma per chi fà quel mestiere serve ben altro per tagliare arbusti erbacce, per il burro va benissimo
i tried this before. * 1st motor is to weak, * 2nd it gets hot - u ll end up by burning motor. * now i am trying 895 motor, with 12-24V ( ua-cam.com/video/hiVULX1oh-c/v-deo.html ) its closer, but still close to overheating the motor, so u need relays or something not to burn it .. In my opinion it should be probably brushless motor - ll see what ll end up .. on this part.
@@lonewolf0076 Then I have to disagree. No matter how professional the tool the user needs to use proper safety protocols. Holding something and drilling into it towards your hand is not proper protocol.
Excellent idea and workmanship. Congrats from Brazil.
Thanks for sharing such an awesome idea!
Great work
Oi , parabéns !! É você é muito criativo..ser inteligente em !!! Obrigado !! DI 🌹..
Beautiful, Amazing work.
Muy bien tú idea solo ubieras comprado un codo de 45 grados, te felicito muy buen trabajo.
Great 👏🏻👏🏻👏🏻👏🏻
This one is dope!
Neet and simple way. Good job bro
Super brother
My opinion is if you can use 45 digree elbow for motor fitting that's better than 90 digree elbow
Amazing work ....🎉
Excellent🙏
Good work keep it going.
Thank you
Fantastic idea
Wow
nice......
GENIAL, GRACIAS
Nice work bro, and Which battery did you use for this?
Que bien
👍
Asi como este señor que inventa herramientas electricos es digno de resaltar y elogiar esa cabeza y voluntad desde La Paz Bolivia saludos siga adelante
Please! Put the parts in a vise to use your drill. One slip and there is gonna be a hole in your hand.
:-(
One can never have too many holes
Wonderful 👌👍
Very nice
really good, but why u need two shock absorbers
THANK YOU SIR, MY IDEA NA AKO.
👏 super and useful video bro ! 👏👏
Nice to see your contribution but where can we get this brush cutter nilon cable, please told me.
Which category you choose for your video on UA-cam ?
There's a 45° PVC elbow instead of using a 90° type.
Good craft nonetheless. ✔️
Excelente, era lo que buscaba, pero es mejor que trabajes con mayor seguridad deberia usar un prensa y evitar heridas graves en las manos, estas tienen piel, musculos, nervios, venas, huesos y articulaciones que trabajan en conjunto.
Good
What power supply you used?
What is the part that you attach to the motor, is that from a grinder? Regards
This is a good skill-building exercise for kids but if you really need to cut grass for cheap buy a used push mower for a few bucks and some sandpaper to sharpen it.
Used battry haw many volts
Anong voltahi ginamit mo
great job...how much this motor price..
Share another idea of making wire cutter. We cannot find these disk.
That is nice. but motor is running Mobile charger possible.
I would like to try this project! Interesting design!
good little motor
that's an insane motor.
جيد فكرة. ممتازه
Como se consigue el motor
Its safety and usability amuse me!
what chuck u use? i have moto dc 775 but no part to connect with the blades/rope
Can use 5mm shank M10 Arbor Mandrel cutting tools for angle grinder adaptor
What sort of nut you have attached to the Boot plates?
Sir I need this one
Bhai yeah kahan say aur katnay ki milay gee
Where can I get the parts to make the unit ?
Muito bom
Ye 775 ka kon sa motor hai bhai etna powerfull hai???
What recharge battery did you use
Very good work.....!!
2 things.....
1. How you handled battery while trimming grass on ground ?
2. Option to connect to main line AC (using long wire) as the battery life would be very short during working.
Dear yeh parts kahan sy purchase kr sakty hain
Magnífico trabajo!! Pero lo más importante es la SEGURIDAD INDUSTRIAL. Es necesario adoptar medidas para difundir conjuntamente con el vídeo.
Mantul👍👍👍
12 voltage motor?
Qual o valor que você vende
Good idea, but some details are missing, and yes, it is not advisable to drill holding in hand
Thank you
Ye kahna melta he
Can you prepare two sets of grass cutter, i will pay the money for it
Tem um desse pra vender pra mim
can i use 997 dc motor?
Cost brother
I cannot find struts boots mounting plate..can you give link where to buy?
those mounting plates can be easily found in Scrap yards, otherwise, it comes with the spring and struts unit.
Bhai kitni cost ka pda apko ye
It's powerfull but for 12v motor/battery it only last for 10 - 15 minutes (on thick grass) which covers approx 10 sq ft of lawn........ imagine if you've got a wide lawn! I've done the same thing and it's a nightmare to trim my 35 sq ft lawn even with 2 batteries.......
hi there, great skills you have, buta what about the dinamo endurance after 1 year of using this? and also, are you satisfied with the results?
J poop
I need one.. plz tell me your price
Digame como se coloca el motor
Vc vende uma dessa?
Só lembrando q ô nylon gent arrebenta muito fácil viu
You could have mentioned the power source also.
motor will be full of grass/dirt/everything else
If I want to purchase dit grass cutter. Is it available?
Motor ke upar jo lagaya vo kya he jaha apne katar fit ki
bike shocker ka cap hai
you in sir lanka
วิธีทำไม่ปลอดภัย
El motor donde se compra
mantulll....
Can we use this to cut weeds in fields
And wt the total cost of it
And how much time it will run if u once charge it..
Plz Replay...
Aa. Aa Yes, you can make this under 20$. it will run for 1-2hours depends on the battery you are using.
@@LahisTechLT Tq for ur repaly
How mani pares ?
Did you find the area does a fully charge battery being consumed for 1 session in cutting the grass? Just asking....
Sicuramente dal punto di vista ingegneristico sei bravo, ma per chi fà quel mestiere serve ben altro per tagliare arbusti erbacce, per il burro va benissimo
Gimana cara dapatkan struts maunting plate
looks like a college project
Bro if possible made for me also
ඔයා දාලාතියෙන තනකොල කපන මැශිමට දාලා තියෙන මොටරයේ ගාන කියද
It's a toy not a cutter 😀
You lost me when you began working a piece in the palm of your hand using a power tool. No way, Jose.
How much is this products
put link the motor buy shop
I need one for my backyard garden. How can I get one exactly like this pls.
Make it like this. It's Easy. Included A-Z steps
@@LahisTechLT What's the RPM of this Motor ?
Use a vice or a clamp to hold pieces you are drilling! You are lucky to still have your fingers.....
i think hes drilling at a very low rpm.. just sped up the footage
I wouldn't mind doing it without clamp.
Creative, yes!
Safety, 🙄
hallo my opinion is that this machine is too underpower for this garden do it with other parts and other motor please
kindly tel me ,whats the name of the appliance?, you are using in time 0:55
REVIEW WITH U no. 7th material on the video description. (it’s called Arbor Adapter)
i tried this before.
* 1st motor is to weak,
* 2nd it gets hot - u ll end up by burning motor.
* now i am trying 895 motor, with 12-24V ( ua-cam.com/video/hiVULX1oh-c/v-deo.html )
its closer, but still close to overheating the motor, so u need relays or something not to burn it ..
In my opinion it should be probably brushless motor - ll see what ll end up .. on this part.
A little bit crazy holding the material you are drilling if you ask me.
Rather it is very dangerous, to have it in your hand , the item you drill
They are professional machines which literally means
We cannot try this at home without right knowledge and use of it
@@lonewolf0076
What's that supposed to mean.
@@aaronmackay6123
I have cleary written brother
@@lonewolf0076
Then I have to disagree. No matter how professional the tool the user needs to use proper safety protocols. Holding something and drilling into it towards your hand is not proper protocol.