MINI GEN 2 ALL, 09G TRANSMISSION OIL CHANGE WITH VALVE BODY REMOVAL밸브바디 탈거식 미션오일 교환
![순덕 게러지 Swndug [sun:dʌk] GARAGE](http://yt3.ggpht.com/3Y7PUHCeZhZZNqdCnLOBMp8X5OShqDGeEnYTdokRmW-6UQi5r6icAUf6bi_n6ipujD5umBId8w=s48-c-k-c0x00ffffff-no-rj)
Вставка
- Опубліковано 5 вер 2020
- MINI GEN 2 ALL, 09G TRANSMISSION OIL CHANGE WITH VALVE BODY REMOVAL
09G, TF60SN
밸브바디 탈거식 미션오일 교환
미션오일을 순환하여 교환하기 어려운 변속기의 경우 적용됩니다.
오일팬만 제거하여 오일을 제거할 수 있지만, 밸브바디를 탈거하여 오일을 더 많이 제거합니다.
그리고 펄스센서를 세척하여 성능에 좋은 영향을 기대합니다.
For transmission which is difficult to change by rotating the mission oil.
Oil can be removed by removing only the oil pan, but more oil is removed by removing the valve body.
And by cleaning the pulse sensor, we expect a good effect on the performance. - Авто та транспорт
좋은 영상이네요.
Great video!
I never knew there was a second plug. I have a Volkswagen and it has the 09G also. This one looks like it may be a bit different. I should look under my car next time I get a chance. It is fairly easy to get under it if I bring it to the point that the front wheels are close to the edge of my garage floor. There is enough space to get under it that way and no have to worry about keeping it level. I know I at least have the Torx plug that is up higher which I can use to fill it. That makes it so much easier so that all you have to do is pull the drain plug out when it is at the right temperature.
Thank You I was told that can't be done.
iets good
How many Miles o KMs did this car have?
What car model is this?
VW PASSAT, MINI GEN2 ALL , MINI GEN 1 S MODEL.
I'm thinking in removing the lube tap port and running the engine to flush most of the fluid off. What do you think about this? s3.amazonaws.com/sonnax-dev/uploads/mercury_image/image/1515/Figure34.jpg
@순덕 Swndug [sun:dʌk] Answering myself, yes, it works, but to flush all the system I had to keep filling the pan until the new oil came out from the lube port.