PVC Airsoft [Part 3] - DIY Airsoft Barrel
Вставка
- Опубліковано 2 жов 2024
- #airsoft #bbs #pelletguns #testing #toygun #toys #pvc #homemade #trending #sniper #sniperpvc
Hey guys, I want to share my DIY AIRSOFT Barrel made up of PVC. This will be my Part 3 on my DIY AIRSOFT Series. Thank You and God Bless us.
Note: This is my first time doing this, there could be some mistakes so please bear with me ☺️🙏
Music track: Vibing by Pufino
Free Music No Copyright (Safe)
Music track: Hawaii by Waesto
Free Background Music for Videos
Keywords:
Homemade Airsoft
Homemade ToyGun
Diy Airsoft
Pvc Airsoft
Pvc Gun
Toygun
To those who are following this tutorial, you may watch the Part 4 first because I made some changes on the receiver. Thank you!
You can skip from this part : 4:40 to 14:25
Link Part 4: ua-cam.com/video/Dfxoj18zss8/v-deo.htmlsi=Le2jBWSigSo7JdNB
You solve the mystery how to make a hop up
Yah, I accidentally discovered it🤣
dapat may voice over
Yuuu, wasap gois por tudeys bidyu🤣...baka marami mag unsubs pag ganyan
ehats de diammeter of the pvc pipper in minute 15:00 ???
I used 20mm diameter pvc pipe
Can you name all material plz
Hi, I made a mistake here.
You can skip from this part : 4:40 to 14:25
Then you can proceed to Part 4
What material did you use sir, i don't need your mistake
@@josephinetupas4791 For the barrel :
20mm pvc pipe
Antenna Elements
8mm x 6mm aluminum pipe
The rest should be ignored because of the mistake. It's better to see the materials on Part 4. Thank you.
Gawa ka ng woodstock para diyan.
Subukan ko lods, pero wala akong pang wood stock eh
Excellent, will this same logic be applied to make one that throws salt?
Not sure bro, haven't tried yet
@@MaakusHobby, Thanks, I will try if this mechanism shoots salt to kill all the flies in my house :)
I would recommend you to make a pcp airgun design. It would be more efficient to make a gun that use salt as amo.
@@theblankheadgaming thanks!
Thằng nay làm cay súng het sức lề mề chậm chạp mà chả ra hồn gì .súng bắn muổi..quá tệ bởi cách làm như đàn bà
Thanks for the support!