Because the reversing signal comes from the data check in CANBUS, when YeeHung Android detects that there is a reversing signal in the CAN data, it will supply power to the camera (out of camera +12v), and switch the display to the reversing video.
In factory setting > vehicle > collect CAN Bus data. Is this where I set the CAN bus settings? I tried both methods and even tapped in the reverse backup wire and my camera is still not working.
c 350e model 2015 W205's rear camera isn't working, so I replaced the camera, but the symptoms don't resolve. When gear R is running, the rear camera is running for about 2 seconds, and then the screen goes back to the menu. And the lid of the rear camera won't open. I forced it to open, and the camera screen comes out, but the still goes back to the menu after about 2 seconds. any one can help?
I have the original oem mercedes 360 camera system. I chose in settings oem camera. Its only working for backwards. When i go to forward it changes the screen for 1 second and go back to main menu. I didnt connect any camera cables, pls help
@StrougeOli You need to connect the power cable of the camera judgment, to the Android harness marked with reverse camera power cable. If it still can't be solved, please send your purchase order number to our after-sales service team ；at： service@yeehung.cn
I bought 2016 c class coupe AMG, and it doesn't have a reverse camera, how can that be?
i guess they only required camera to have a rear view after 2018 lol before that it was optional, same prob as you tho lol
Anyone know where the camera control module is location ??
Where did u connect the power cable ? did u pull from the front console ? or u tap it from the reverse light ?
Its power cord is connected from the side of the Android screen, and it does not need to be connected to the power supply from the reversing light.
Power cord as in the “camera + 12v” red cord?
Is it possible for the old small screen 2015-2018?
Because my orignal screen is smaller than yours
This Camera only support the Android screen, YEEHUNG NTG 5.0 android screen is compatible with your car.
If I want just to install the camera without android screen what do I need for that? Interface..etc
@@kidsgames745 Sorry, the Camera can not work with the oem screen, Because its video input interface is different from the OEM display interface.
Me gustaría saber que año es el carro, quiero instalarla en un 2015 o si tienes vídeo haciéndolo con uno 2015 c300
Sí, es un Mercedes W205 2015-2018.
What is reason that you dont connect yellow and red cabel in trunk to each other? Dont you have to connect to reversing stop?
Because the reversing signal comes from the data check in CANBUS, when YeeHung Android detects that there is a reversing signal in the CAN data, it will supply power to the camera (out of camera +12v), and switch the display to the reversing video.
@@pempcar i want to install to original screen of mercedes cla 2014. Then i have to connect to reverse light i think?
@@leabasket4382 No need, YeeHung will check the back up car signal from the can data.
In factory setting > vehicle > collect CAN Bus data. Is this where I set the CAN bus settings?
I tried both methods and even tapped in the reverse backup wire and my camera is still not working.
11:35 i See the Black ground cable. U just leave it? Is That Safe?
This ground wire should have been taped over. Thank you for your fine advice.
@@pempcar ok but u dont have to connect it?
@@Element-mq3ez Yes, because the yellow video housing is the ground wire.
@@pempcar thank you!
The link you have listed is for a front camera can u plz provide a link for the reverse camera
The ASIN for the rear camera is:B09TF1WJR6
The warehouse is out of stock now.
c 350e model 2015 W205's rear camera isn't working, so I replaced the camera, but the symptoms don't resolve. When gear R is running, the rear camera is running for about 2 seconds, and then the screen goes back to the menu. And the lid of the rear camera won't open. I forced it to open, and the camera screen comes out, but the still goes back to the menu after about 2 seconds. any one can help?
If you replaced your Android screen to cause this, please send your purchase order with questions to Service@yeehung.cn
wow 🤩
Very thanks!
thanks
I have the original oem mercedes 360 camera system. I chose in settings oem camera. Its only working for backwards. When i go to forward it changes the screen for 1 second and go back to main menu. I didnt connect any camera cables, pls help
Dear, pls contact our after-sales team(service@yeehung.cn), send you new software update. thanks
What do I do with the black cable?
Yes, you need hide it.
I have connected everything as it is in the video, I have the same radio system but when I put the car to reverse it doesn’t give me any image
@@StrougeOli change the camera settings from your android screen
@StrougeOli You need to connect the power cable of the camera judgment, to the Android harness marked with reverse camera power cable. If it still can't be solved, please send your purchase order number to our after-sales service team ；at： service@yeehung.cn
@@StrougeOli did you ever figure this out? I am having the same issue with the camera not working.
Пока выдергивал шлейф из монитора , уперся его нижней рамкой в верхнюю часть консоли, по любому поцарапал.., какой же не профессионализм 🤦♂️