That’s perfect! Thanks a lot for the video. I synced the throttle blades on the bench but it’s out on the right cylinder again, I had no idea you could get at the screws with the tank off. Thanks a bunch
Very informative video thank you as I have a 1984 Honda Shadow vt700c. I see where you made the adjustments, however, it would have been nice to see where that screw to make the adjustments was on top. What I do this procedure I'll check the service manual, again, 👍🏼 on making this video!! Those fuel lines can be a b**** cant they 🤭
Thanks for watching. The fuel lines are definitely a pain. The adjustment screw is easier to see with the air intake off. It should be between the 2 carbs. Stay safe
That’s perfect! Thanks a lot for the video. I synced the throttle blades on the bench but it’s out on the right cylinder again, I had no idea you could get at the screws with the tank off. Thanks a bunch
You're welcome. Thanks for watching!
Very informative video thank you as I have a 1984 Honda Shadow vt700c. I see where you made the adjustments, however, it would have been nice to see where that screw to make the adjustments was on top. What I do this procedure I'll check the service manual, again, 👍🏼 on making this video!! Those fuel lines can be a b**** cant they 🤭
Thanks for watching. The fuel lines are definitely a pain. The adjustment screw is easier to see with the air intake off. It should be between the 2 carbs. Stay safe
Did you replace the slide diaphragm before getting to this point? Could you share where you found them?
I had checked the slide diaphragms when the carbs were rebuilt. They were good. I'm not sure where you can find replacement diaphragms.
@@wonkster1970 Thanks buddy.
The hose on top you connected to plastic intake, where is that coming from?? I cant find hose to plug in there.
There is a Phillips screw on the left and right side of the bike. It is located right below the carb intake boot.
The sync gauges that I purchased came with some adapters that connected to the engine.
What are you poking at to help sync up the carb?poking being a joke 😅
There is another adjustment screw in there that I'm poking. Lol.
@wonkster1970 couple weeks and I'll be dealing with an 86 carb hopefully I can get it up and running.
@@wonkster1970 it's the candy apple red one.
@@adams13f That sounds like a nice bike!